On 3/2/06, Tom Haddon <[EMAIL PROTECTED]> wrote:
> Hi Folks,
>
> Very new to Gentoo, although not to Linux. I'm trying it out in QEMU,
> and have just completed the installation. Only problem is I can't seem
> to connect to the internet. QEMU is basically meant to provide an
> emulated network card
Hi
This is certainly because you haven't loaded your network card driver at
boot time. Be sure you have entered your driver name ( I am not sure maybe
it's 8029too) at file /etc/modules.autoload.d/kernel-2.6. You can use nano
text editor to edit the file...
Cheers
cApTaiN_FaNtAsTiK
Thanks, much appreciated. Turns out it was ne2k-pci. Added that to the
file you mentioned and it was all good.
Thanks, Tom
On Thu, 2006-03-02 at 11:56 -0500, sHadoW MaN wrote:
> Hi
>
> This is certainly because you haven't loaded your network card driver at
> boot time. Be sure you have entered
On 5/27/06, Kenneth Hopping <[EMAIL PROTECTED]> wrote:
The problem appears to be that /sys/class/net/eth0 does not exist.
This is a pseudo-filesystem like proc that I cannot manipulate.
Is there some configuration file that needs initialization or a package
that I need to install?
No, you just
On 5/28/06, Kenneth Hopping <[EMAIL PROTECTED]> wrote:
Richard Fish wrote:
>
> What do lspci and lsmod report?
01:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
(rev 74)
Ok, when you go to configure your kernel, go under "Device
Drivers->Network device support->Ethernet (1
On 5/28/06, Richard Fish <[EMAIL PROTECTED]> wrote:
On 5/28/06, Kenneth Hopping <[EMAIL PROTECTED]> wrote:
> Richard Fish wrote:
> >
> > What do lspci and lsmod report?
>
> 01:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
> (rev 74)
Ok, when you go to configure your kernel,
Sunday 28 May 2006 20:28 skrev Daniel da Veiga:
> Maybe he already have the driver compiled as a module but its not
> loading it?!
If that was the case it would have shown up when he ran:
# find /lib/modules/2.6.16-gentoo-r7/kernel -type f -iname '*.ko'
Look in his previous mail. It didn't. This
Richard Fish wrote:
Ok, when you go to configure your kernel, go under "Device
Drivers->Network device support->Ethernet (10 or 100Mbit)". Select
the option "3COM cards", and then the "3c590/3c900 series..." with an
'M'.
Assuming that you already configured and installed a kernel, so that
/usr
On Mon, 2006-05-29 at 00:19 -0700, Kenneth Hopping wrote:
> I
> also learned to always keep the last working kernel as a backup when you
> reconfigure.
And you can add another piece of self-taught knowledge to your
toolkit :) This is one that I do without thinking now.
--
Iain Buchanan
You
Monday 29 May 2006 09:19 skrev Kenneth Hopping:
> I selected the 3COM options like you suggested and recompiled the
> kernel. Unfortunately, during reboot I got "invalid compressed format
> (err=1)". I tried "make clean" to flush everything and compiled again
> but it still wouldn't boot. My drasti
On 5/29/06, Kenneth Hopping <[EMAIL PROTECTED]> wrote:
Thanks for pointing me in the right direction. I finally got eth0
working, but it was a struggle.
Glad you got it working.
I selected the 3COM options like you suggested and recompiled the
kernel. Unfortunately, during reboot I got "inva
11 matches
Mail list logo
