Are you looking to overclock? If so, take a look at 680i based boards, such
as the Gigabyte GA-N680SLI-DQ6. Absolutely wonderful board--I have one--but
they're about impossible to find right now. The first production run sold
out much faster than expected; stock isn't expected to return for another
Anyone see a situation where XP decides that all drivers (such as
basic keyboard, mouse, and hard drive) are unsigned?
T
Just installed Vista Business, for the hell of it, on my laptop.
Is there a way to set it up so I can have the LAN connection have one
profile (Static IP, Mask, Gateway, & DNS) for my office and another
profile for when I am roaming (DHCP provided IP, Mask, Gateway, & DNS)?
--
Regards,
joeus
Hello Thane,
Thursday, April 26, 2007, 8:14:41 AM, you wrote:
> Anyone see a situation where XP decides that all drivers (such as
> basic keyboard, mouse, and hard drive) are unsigned?
no... even native drivers?
--
Regards,
joeuser - Still looking for the 'any' key...
Yes. I've heard of this on PC's using restore/repair installs. What fixed it
was to re-apply SP2.
From: Thane Sherrington <[EMAIL PROTECTED]>
Reply-To: The Hardware List
To: hardware@hardwaregroup.com
Subject: [H] XP thinks all drivers are unsigned
Date: Thu, 26 Apr 2007 10:14:41 -0300
Anyone
At 10:36 AM 26/04/2007, Hayes Elkins wrote:
Yes. I've heard of this on PC's using restore/repair installs. What
fixed it was to re-apply SP2.
Ok, thanks. I'll try that.
T
At 10:29 AM 26/04/2007, Joe User wrote:
Hello Thane,
Thursday, April 26, 2007, 8:14:41 AM, you wrote:
> Anyone see a situation where XP decides that all drivers (such as
> basic keyboard, mouse, and hard drive) are unsigned?
no... even native drivers?
Yup.
T
After I rebooted my box last week I have been getting a message like
"Need ASACPI.sys on ATK0110 ACPI utility"
I click cancel and everything seems to still work as before.
What can I do to get rid of this bothersome message?
I installed ASPI32.exe and it made no difference.
I ran ASPICHK.exe and
Thanks Greg, initially I probablly wont overclock but I have overclocked
every system I have owned so I guess I will eventually.
I've seen a few mentions on the list of Gigabyte boards lately and was
going to look at them but I have had Asus for at least the last 8 years
and they haven't let me do
JEDEC DDRII standard voltage is 1.8v. You won't find any memory faster than
PC6400 that is rated to do its specified speed at 1.8v though. The issue is
that Micron D9GMH seems to have a tendency to fail over time at high
voltages--and that threshold seems to be >2.1.
It's really quite unfortunate.
At 12:57 PM 26/04/2007, Sam Franc wrote:
After I rebooted my box last week I have been getting a message like
"Need ASACPI.sys on ATK0110 ACPI utility"
I click cancel and everything seems to still work as before.
What can I do to get rid of this bothersome message?
I installed ASPI32.exe and it
http://www.dailytech.com/ATI+Radeon+HD+2900+XTX+Doomed+from+the+Start/article7052.htm
Ouch. Doesn't even approach the performance of a NVIDIA 8800 GTX.
So here we have the two powerhouses of PC gaming both falling flat on their
faces as far as their DX10 parts go. NVidia's 8800 series may be th
I have not laid hands on the XTX. Unless I am very wrong, we are not allowed
to say anything on the XT as it is, because it's still an NDA covered property.
All I will say is: I do not understand their benchmarks.
That is all.
On the other end, I would say this: The one thing that ATI has fi
Here are the big advantages of NasLite over FreeNAS:
(1) Considerably, and I mean -CONSIDERABLY- faster data transfers.
How much faster? Here's some Disc Wriggler scores:
---
Here's a snippet from my Diskwriggler tests using 500 HD frames unde
Ahhh, I see, I did not know how to calculate the MB from the Mb.
Either way, it flies compared to home.
Also, this is a business, I'm sure it's not cable or anything like that.
Bobby
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Greg Sevart
Sent: Wed
I'll throw out another recommend for a different 680i board (the Gigabyte one
is nice) most 680i boards though are using the Realtek HD, which has
DTS-Connect and DD-Live, so you're covered there. I've become pretty fond of
the FoxConn entry. the N68S7AA-8EKRS2H. First, everyone is so enamore
I'll take a look, thanks Chris.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of CW
Sent: Thursday, April 26, 2007 4:47 PM
To: The Hardware List
Subject: RE: [H] Upgrade questions
I'll throw out another recommend for a different 680i board (the
Gigabyte o
Looks like a nice board. Too bad I didn't see it before--might have saved me
about $600. :) I've been wanting to go watercooling for a while, but chipset
heat problems due to heatpipe effectiveness in an inverted-motherboard case
design finally pushed me over the edge, to the tune of about $450.
Yeah, that's especially true. If you're using an inverted case, like a Lian
Li, etc. then this is the ONLY board I would consider.
-Original message-
From: "Greg Sevart" [EMAIL PROTECTED]
Date: Thu, 26 Apr 2007 18:35:30 -0700
To: "'The Hardware List'" hardware@hardwaregroup.com
Subject:
Yeah. The heatpipes work great when they're mounted in a "normal" case, but
don't work as well when they have to rely on the wicking action. I love my
Lian-Li case so much that I was willing to spend the bucks to solve the issue
once and for all. :) I ended up using a Swiftech Apogee GT block fo
I have FTP server sw running on my LAN for my own use when out of the shop a (
and a few choice customers ) anonymous log in is disabled but the last few days
I have been bombarded with brute force attachs which I have been one by one
blocking ip bit I assume that waht ever sw is sniffing these
At 08:00 PM 4/26/2007, you wrote:
I have FTP server sw running on my LAN for my own use when out of
the shop a ( and a few choice customers ) anonymous log in is
disabled but the last few days I have been bombarded with brute
force attachs which I have been one by one blocking ip bit I assume
I know my request was overly simple for a not so simple request. Netgear fvs318
. getting a little old but it is a 8 port and has served me well.
was hoping could set the control port to something that would not be sniffed
and the data port anywhere. so far no one has gotten in, running on Vista
Hello FORC5,
Thursday, April 26, 2007, 10:23:27 PM, you wrote:
> I know my request was overly simple for a not so simple request.
> Netgear fvs318 . getting a little old
> but it is a 8 port and has served me well.
> was hoping could set the control port to something that would not be sniffed
>
good idea, will investigate
fp
thanks
At 09:23 PM 4/26/2007, Joe User Poked the stick with:
>Hello FORC5,
>
>Thursday, April 26, 2007, 10:23:27 PM, you wrote:
>
>> I know my request was overly simple for a not so simple request.
>> Netgear fvs318 . getting a little old
>> but it is a 8 port and ha
25 matches
Mail list logo