It'll be great if it actually works. If it crashes like their Macs then
they are in for a world of hurt. I just can't believe they aren't going
with more providers like Verizon.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brian Weeden
Sent:
giving the 2nd device an address like 192.168.1.100 and see what
happens.
Check the arp table on the 1st device to see what appears in there - you
should see the mac address of the 2nd device plus it's IP address.
- Original Message -
From: Chris Klein [EMAIL PROTECTED]
To: 'The Hardware
I have a WRT54G connected to my cable modem. It provides WPA2 Wireless G
access to several devices in my apartment, along with a cat 5 connection to
my main computer.
I'm connecting a Linksys WRT54GS, to the 54G. I want the 54GS to provide
WEP wireless to 2 devices in my apartment that do not
H...didn't think about that. And all of my devices will get an IP
address assigned to them from the first/main router, correct? I won't
really have any devices plugged into the second one, it's mainly just for
wireless.
I just tired it and it's not working. Do you have Linksys products
Did you have to make any other changes? I've changed the second Linksys
from a gateway to a router, and changed the IP to 192.168.2.1. No matter
how I plug it into the first Linksys, it does not work. This is very
frustrating.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
It actually appears to be working now. The first Linksys is giving out a
192.168.1.x IP address, and I can get to the internet. I can open up the
config properties for the first router(192.168.1.1. However, I can't reach
the 192.168.2.1 router to make config changes. Are you able to reach
On my old AMD chip I couldn't get more than 1 gig(2x512) to work at the
full bus speed. I don't remember what speed it was, but it was on the same
board (ASUS A8N SLI Deluxe). My board supports 4 gigs, and I currently have
1 gig (2x512) installed. I need to bump it up to at least 2 gigs. Am I
with Opterons?
What speed memory and BIOS rev? I've got that same board running a
different opteron running on that board using 4gig with xp64
Sent via BlackBerry from Cingular Wireless
-Original Message-
From: Chris Klein [EMAIL PROTECTED]
Date: Wed, 6 Dec 2006 20:57:17
Do not test the SMART Gods, you should bow to them for giving you a warning.
YMMV.
As far as the CRC goes, I would first make sure your OS did not dumb down
the IDE drive to PIO mode.
From: Chris Klein [EMAIL PROTECTED]
Reply-To: The Hardware List hardware@hardwaregroup.com
To: 'The Hardware
setup going SATA/IDE/SATA. But, It should work.
Regards,
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chris Klein
Sent: Tuesday, October 17, 2006 8:55 PM
To: 'The Hardware List'
Subject: [H] Hard Drive Problems
I need help on this one. I have 4 hard
] iMac arrived today...
On Sat, Sep 30, 2006 at 09:46:43PM -0400, Chris Klein wrote:
Too many problems with them at work. They can't handle what we
needswitching everything over to PCs slowly. We have some brand
new G5s in that we are testing. Those are little better than the
older G5s
Too many problems with them at work. They can't handle what we
needswitching everything over to PCs slowly. We have some brand new G5s
in that we are testing. Those are little better than the older G5s but
still lots of problems in a corporate environment.
I have an older mac here...it's
It's true. I used to work in a high volume copy shop. Our laser printers
and copiers had protection mechanisms like these built in. Our copiers took
it one step better when it came to currency. If you tried to copy any
denomination, it would turn the entire photo copy yellow so you couldn't
Anyone who has taken any of the comptia certs could you send me an e-mail?
I have a few questions...
Thanks
Chuck,
I've read a few of your other posts and they kind of scare me. As a fellow
computer guy, don't you like a challenge? Don't you want to try out new
hardware that you've never touched before? There was a point when I had no
experience with AMD's, but I took the plunge. If you understand
Why would one own their own computer shop and be in the computer industry if
they have no drive or passion? They should want to be the best, and give
their customers the best. How can you possibly stand behind your product,
and your image when you know that it's not your best work. I just don't
I've had an Athlon 64 3000+ cpu for about 6 months now. It's been a great
system. I'm currently running xp64 as well and they are rock stable.
However, I've had problems getting 4 sticks(2 gigs of ram) to work at the
correct speed. I've read various articles about the memory controller being
Message -
From: Chris Klein [EMAIL PROTECTED]
To: 'The Hardware List' hardware@hardwaregroup.com
Sent: Wednesday, September 28, 2005 4:47 PM
Subject: [H] AMD CPU question
I've had an Athlon 64 3000+ cpu for about 6 months now. It's been a great
system. I'm currently running xp64 as well
Yes and no. I have vonage and it goes through my linksys router. With the
earlier firmware there was no QoS setting. I never had any problems. But
then again, I wasn't maxing out my service. Now that I've moved and I have
adelphia they are much slower. I have set QoS up but I don't notice
But then you would have to learn windows and a mouse with more than 1
button. Are you really ready for that?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of James Boswell
Sent: Tuesday, August 23, 2005 5:23 PM
To: The Hardware List
Subject: [H]
Gang,
I currently have a Toshiba SD 2715 carousel changer in my living room. It
plays normal DVDs just fine, no problems. However, it's been having a huge
problem with burned DVDs. I have quite a few hundred DVDs that I have
backed up, and I keep them in a dvd binder. It makes it much easier,
An hour of my workwhether it is connecting their cable modem to the
computer, installing ram, installing a printer, repairing something,
training, etcwhatever they need.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Thane Sherrington
Sent:
We haven't cut output or laid anyone off in our chip division. Who knows
what's going on at this point. There have been no official announcements on
our end.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Greg Sevart
Sent: Sunday, June 05, 2005 12:12
What are you guys using for A/V on x64?
/2005, Chris Reeves Poked the stick with:
6800GT
-Original Message-
From: [EMAIL PROTECTED]
[
mailto:[EMAIL PROTECTED]] On Behalf Of Chris Klein
Sent: Monday, May 23, 2005 7:02 PM
To: 'The Hardware List'
Subject: RE: [H] XP x64
What are you guys using for A/V on x64?
--
Tallyho ! ]:8
Anyone convert or beta test it? Any recommended websites for drivers/info?
I'm using the beta from MS right now, but 1/2 of my devices don't have
drivers. I e-mailed Epson tech support but got a pretty crappy response.
Just wondering if there were a lot of sites out there with info.
I won't touch Tivo, it doesn't have the features replay has. I have a
replay, and the cable box from my cable company has a built in pvr so I can
record high def.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Francisco Tapia
Sent: Friday, May 20, 2005
I have an Asus A8N-SLI deluxe board, and an Athlon XP 3000+ Barton.
I purchased Corsair Value Select ram, 2 512 meg sticks. IT was supposed to
be DDR400/PC3200.
I ran some benchmarks on it lately because it didn't seem as fast as it
should be. I went into the BIOS and it is only being
think.
Here is the Corsair RAM suggestions for your MB:
http://compatible.corsairmemory.com/memorysearch.aspx?modelid=1163
Bobby
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chris Klein
Sent: Tuesday, May 10, 2005 10:57 AM
To: 'The Hardware List'
Subject
] On Behalf Of Thane Sherrington
Sent: Tuesday, May 10, 2005 11:32 AM
To: The Hardware List
Subject: RE: [H] RE: Confused with Ram
At 12:19 PM 10/05/2005, Chris Klein wrote:
It shows up as dual channel when it is posting, but it comes up as DDR 266
instead of 400.
Have you tried reflashing the BIOS?
T
Of Thane Sherrington
Sent: Tuesday, May 10, 2005 11:42 AM
To: The Hardware List
Subject: RE: [H] RE: Confused with Ram
At 12:28 PM 10/05/2005, Chris Klein wrote:
Yes, flashed it to the newest version. I'm wondering if maybe I was sent
the wrong ram. I'll have to wait until tonight to power it down
to set ram above 100% to drive it faster than the CPU.
Chris Klein wrote:
Yes, flashed it to the newest version. I'm wondering if maybe I was sent
the wrong ram. I'll have to wait until tonight to power it down. I am
correct though, DDR266 is much slower than what I should have...right
I have the MS Bluetooth wireless keyboard and mouse. I just broke the usb
Bluetooth adapter. Can I order any Bluetooth adapter and will it work? Or
do I have to order another MS adapter?
Thanks,
Chris
What's the best freeware package out there if I want to encrypt my entire
thumb drive? I have a sandisk if that makes any difference. I want to keep
it encrypted at work in case anyone grabs it.
What's the best freeware package out there if I want to encrypt my entire
thumb drive? I have a sandisk if that makes any difference. I want to keep
it encrypted at work in case anyone grabs it.
Of Chris Klein
Sent: Saturday, April 09, 2005 10:12 PM
To: 'The Hardware List'
Subject: [H] OT Any websites with TV shows???
My HD PVR did not record the whole episode of third watch last night. Does
anyone know of any websites where you can download them? I don't think this
is illegal...if it is I'm
How can you spend all that money and not go HD? I can't stand watching
regular TV now that I'm used to HDTV.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Hayes Elkins
Sent: Friday, April 01, 2005 11:16 PM
To: hardware@hardwaregroup.com
Subject:
Hi Brian,
I've never had problems like those with all of the boxes I have built. Are
they really cheap parts? Without being there to watch the way you assemble
it's hard to comment. Maybe a flaky power supply? Maybe the motherboard is
not mounted correctly? The only problems I've had with
Are you sure you downloaded the right bios? I once flashed a Shuttle system
with the wrong bios. It didn't verify at all to see if I was flashing with
the correct one. Luckily, I caught it before I rebooted(windows flash
utility).
Does Abit have one of those Cd-roms that you can use? Asus now
39 matches
Mail list logo
