Re: Jes2 Exit52 Again

2007-04-02 Thread Giovanni Santuz
Hi Bob Thanks for your time :-) You were wright of course, R7=Changed Jobcard R9= SAVED Jobcard Sometime one is just blind :-( You wrote : I'm afraid JES2 is using JCTJNAME to fill in $HASP100 and you haven't changed that. I searched the $JCT(in fact the whole maclib) and the JCTJNAME Field

Re: Jes2 Exit52 Again

2007-04-02 Thread Bob Rutledge
Giovanni Santuz wrote: ... I searched the $JCT(in fact the whole maclib) and the JCTJNAME Field is not available any more Sure it is, but you won't find it by searching for it by name. The $JCT macro calls $SPID which generates the label. I suggest you assemble HASPDOC and keep the

Re: Jes2 Exit52 Again

2007-03-29 Thread Giovanni Santuz
Hi Just found this forum about JES2 EXIT52 We are going from Z/OS 1,6 to 1.8 and need to change our EXITs alot of the COntrolblocks have changed e,g JCTJNAME is not available anymore Found out that for normal submits EXIT52 is entered. Thru the IBM JES2z/OS 1.7 Migration Guide I was able to

Re: Jes2 Exit52 Again

2007-03-29 Thread Bob Rutledge
I've never attempted to change a jobname in the JES2 exits or anywhere else, but I'll take a stab at this... Giovanni Santuz wrote: ... Here the EXIT (contains exit02 and EXIT52): ... L R9,X002JXWR Points to 80 byte Workarea L R7,X002CARD

Re: Jes2 Exit52 Again

2006-10-30 Thread Dave Kopischke
need to know how big of an idiot I am, do you ?? Forget to pay the RENT? OK, I'll come clean... It wasn't even that obscure... Really rookie stuff... Less than rookie stuff... I tried to move a flag data item to a different register because I thought it was a good idea. It was sharing

Re: Jes2 Exit52 Again

2006-10-13 Thread Gibney, Dave
To: IBM-MAIN@BAMA.UA.EDU Subject: Jes2 Exit52 Again Greetings again, I'm having a hard time getting this exit to work. My assembler skills are pretty much non-existent. I'm trying convert an old JES2 EXIT2 to work as as an EXIT52. Following the manuals, IBM's sample exit and the old exit, I

Re: Jes2 Exit52 Again

2006-10-13 Thread Gibney, Dave
Sorry, typo, make that R7 not R5 -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Gibney, Dave Sent: Thursday, October 12, 2006 11:58 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Jes2 Exit52 Again Well, you don't ever load R5 or R8

Re: Jes2 Exit52 Again

2006-10-13 Thread Dave Kopischke
On Fri, 13 Oct 2006 00:10:41 -0700, Gibney, Dave [EMAIL PROTECTED] wrote: Sorry, typo, make that R7 not R5 Thanks for your help, I caught the typo. In my cutting pasting, I missed a couple lines from the IBM sample exit: LRR8,R0 Copy XPL address L

Re: Jes2 Exit52 Again

2006-10-13 Thread Gibney, Dave
: Friday, October 13, 2006 9:15 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Jes2 Exit52 Again On Fri, 13 Oct 2006 00:10:41 -0700, Gibney, Dave [EMAIL PROTECTED] wrote: Sorry, typo, make that R7 not R5 Thanks for your help, I caught the typo. In my cutting pasting, I missed a couple lines

Re: Jes2 Exit52 Again

2006-10-13 Thread Dave Kopischke
On Fri, 13 Oct 2006 09:21:57 -0700, Gibney, Dave [EMAIL PROTECTED] wrote: I changed to use the $JCT address in the XPL, I don't know if this will help you. I didn't look al that close at your code after I noticed the unloaded USINGS. OK, I'll give that a shot too. I didn't even notice that

Re: Jes2 Exit52 Again

2006-10-13 Thread Gibney, Dave
Check out SHARE Presentations from Skip Robinson and Tom Wasik -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dave Kopischke Sent: Friday, October 13, 2006 9:47 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Jes2 Exit52 Again On Fri

Re: Jes2 Exit52 Again

2006-10-13 Thread Dave Kopischke
On Fri, 13 Oct 2006 10:00:14 -0700, Gibney, Dave [EMAIL PROTECTED] wrote: Check out SHARE Presentations from Skip Robinson and Tom Wasik I've looked at everything findable via the web. I'll check out SHARE right now, but it seems we do something very different than everyone else in this

Re: Jes2 Exit52 Again

2006-10-13 Thread Dave Kopischke
On Fri, 13 Oct 2006 10:00:14 -0700, Gibney, Dave [EMAIL PROTECTED] wrote: Check out SHARE Presentations from Skip Robinson and Tom Wasik I went through Skips SHARE presentation and made some changes to ignore what comes in R1 and base all addresses off of XPL fields. Still S0C4's. How does

Re: Jes2 Exit52 Again

2006-10-13 Thread Gibney, Dave
Information Technology Washington State University Pullman, WA 99164-1222 -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dave Kopischke Sent: Friday, October 13, 2006 11:17 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Jes2 Exit52 Again On Fri, 13

Re: Jes2 Exit52 Again

2006-10-13 Thread Dave Kopischke
On Fri, 13 Oct 2006 11:29:06 -0700, Gibney, Dave [EMAIL PROTECTED] wrote: I put $trace statements carefully in my ASM source. It took me about 4 days to do the 7 exits we use. It went much faster after I installed the CBT exit loader (exit 5) One of my colleagues is looking at installing the

Re: Jes2 Exit52 Again

2006-10-13 Thread Richard Pinion
Idiots are not born they are created. Please share! -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at

Re: Jes2 Exit52 Again

2006-10-13 Thread Ed Finnell
In a message dated 10/13/2006 2:58:12 P.M. Central Standard Time, [EMAIL PROTECTED] writes: need to know how big of an idiot I am, do you ?? Forget to pay the RENT? -- For IBM-MAIN subscribe / signoff / archive access

Jes2 Exit52 Again

2006-10-12 Thread Kopischke, David G.
Greetings again, I'm having a hard time getting this exit to work. My assembler skills are pretty much non-existent. I'm trying convert an old JES2 EXIT2 to work as as an EXIT52. Following the manuals, IBM's sample exit and the old exit, I put this together. I yanked all the doc so it would