Well, OK. The z114 announcement talks about over 100
new instructions. Are these in addition to the z196
instructions or is this just a re-statement of the
capabilities of this series of machines?
Is there a new PoO (Pops, Props, Poops) available?
Anyone know?
Thanks.
--
Kind regards
It's the same instructions as on the z196. Nothing new.
Cheryl
==
Cheryl Watson
Watson Walker, Inc.
www.watsonwalker.com
941-266-6609
==
On Jul 12, 2011, at 1:57 PM, Steve Comstock wrote:
Well, OK. The z114 announcement talks about over 100
new
:
Well, OK. The z114 announcement talks about over 100
new instructions. Are these in addition to the z196
instructions or is this just a re-statement of the
capabilities of this series of machines?
Is there a new PoO (Pops, Props, Poops) available?
Anyone know?
Thanks.
--
Kind regards
.
Frank
At 01:49 AM 9/12/2005, you wrote:
Support for the new instructions is contained in APAR PK02660 and the
PTFs are available for both R4 and R5 on all platforms.
Regards
John Dravnieks, HLASM
Development Programmer
Cole Software LLC
www.colesoft.com
Phone : 540.456.6164
from the zOS
support page at
http://www-03.ibm.com/servers/eserver/support/zseries/zos/index.html.
Frank
At 01:49 AM 9/12/2005, you wrote:
Support for the new instructions is contained in APAR PK02660 and the
PTFs are available for both R4 and R5 on all platforms.
Regards
John Dravnieks
Subject: Re: Documentation for the New Instructions for the z9 Processor
I might be doing something wrong here. When I search for this
APAR at http://www.ibm.com/support/us/, all I get is an open
APAR with no description and no PTFs. I reached the search
page from the zOS support page at
http
In a message dated 9/11/2005 1:53:28 P.M. Central Daylight Time,
[EMAIL PROTECTED] writes:
Moreover, even where the properties of an instructiion can be guessed at
with high reliability, as is the case with more than half of those in the
list, we shall not, as a practical matter, be able
John Dravnieks wrote:
Support for the new instructions is contained in APAR PK02660 and the
PTFs are available for both R4 and R5 on all platforms.
Any idea when to expect a POO update?
Kind regards,
-Steve Comstock
Regards
John Dravnieks, HLASM
- Message from john gilmore [EMAIL
)
and your code would work. This is somewhat difficult, and perhaps not
interesting to most of us. As you say, this might not be practical. But it is
feasible.
We simulate new instructions all the time using library macros. This
allows the program to use the instruction as if the HLASM
In a message dated 9/12/2005 9:47:16 A.M. Central Daylight Time,
[EMAIL PROTECTED] writes:
We simulate new instructions all the time using library macros. This
allows the program to use the instruction as if the HLASM support was
there. Once the instruction is implemented
for the New Instructions for the z9 Processor
In a message dated 9/11/2005 1:53:28 P.M. Central Daylight Time,
[EMAIL PROTECTED] writes:
Moreover, even where the properties of an instructiion can be guessed
at
with high reliability, as is the case with more than half of those in the
list, we shall
Has anyone found any technical documentation for the new instructions
introduced for the z9 processor?
John P Baker
Software Engineer
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL
Instructions for the z9 Processor
Date: Sun, 11 Sep 2005 10:51:17 -0400
Has anyone found any technical documentation for the new instructions
introduced for the z9 processor?
John P Baker
Software Engineer
--
For IBM-MAIN
John P Baker wrote:
Has anyone found any technical documentation for the new instructions
introduced for the z9 processor?
Bob Rogers summarized them in his SHARE session:
2836 - Even More of What You Do When You're a CPU
Unfortunately, the same inability to access the .pdf files
, September 11, 2005 11:39
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Documentation for the New Instructions for the z9 Processor
Look in Appendix B of SG24-6669-00, wqhich oyou can download at the IBM
Publ,ications website.
John Gilmore
Ashland, MA 01721
USA
support for them.
John Gilmore
Ashland, MA 01721
USA
From: John P Baker [EMAIL PROTECTED]
Reply-To: IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Documentation for the New Instructions for the z9 Processor
Date: Sun, 11 Sep 2005 12:06:34 -0400
I have
Support for the new instructions is contained in APAR PK02660 and the
PTFs are available for both R4 and R5 on all platforms.
Regards
John Dravnieks, HLASM
- Message from john gilmore [EMAIL PROTECTED] on Sun, 11
Sep 2005 18:53:13 + -
Subject:
Re: Documentation for the New
17 matches
Mail list logo
