I need some SMS help. I've never had to mess with it before, and don't have
a clue. If there is a quick and dirty way to get what I need done, I'd
appreciate someone givimg me some help.
I've just migrated from a 1.6 Flex-es system to IBM's RDP system. Running
1.9. SMS is active. I'v
On Wed, 24 Sep 2008 15:27:24 -0500, Dave Day <[EMAIL PROTECTED]> wrote:
>I need some SMS help. I've never had to mess with it before, and don't
have a clue. If there is a quick and dirty way to get what I need done, I'd
appreciate someone givimg me some help.
>I've just migrated from a 1.
No, I don't really want SMS for any reason. I tried IPL'ing with the SMS
sub-system not getting started, and had numerous problems when running. So,
I'm back to having SMS active. Since it is active, it must have some or all
of the functions you defined all ready in place. It would seem to m
On Wed, 24 Sep 2008 15:27:24 -0500, Dave Day <[EMAIL PROTECTED]> wrote:
>I need some SMS help. I've never had to mess with it before, and don't
have a clue. If there is a quick and dirty way to get what I need done, I'd
appreciate someone givimg me some help.
>I've just migrated from a 1.
On Wed, 24 Sep 2008 15:45:33 -0500, Dave Day <[EMAIL PROTECTED]> wrote:
>No, I don't really want SMS for any reason. I tried IPL'ing with the SMS
>sub-system not getting started, and had numerous problems when running. So,
>I'm back to having SMS active. Since it is active, it must have some or
On Wed, 24 Sep 2008 15:45:33 -0500, Dave Day <[EMAIL PROTECTED]> wrote:
> Since it is active, it must have some or all
>of the functions you defined all ready in place. It would seem to me I just
>have to find them, and modify them.
>
Not necessarily. SMS must be active in at least a null confi
? You can then go into the ISMF application and look at what is defined in
the
"ACTIVE" configuration. There is likely not much.
OK, how do I do that? Below is a cut and paste from the 1st panel when I
enter the application.
Enter Selection or Command ===>
Select one of the following optio
, September 24, 2008 4:13 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Some help with SMS
? You can then go into the ISMF application and look at what is defined
in
the
> "ACTIVE" configuration. There is likely not much.
OK, how do I do that? Below is a cut and paste from the 1st panel
EMAIL PROTECTED] On
Behalf Of Dave Day
Sent: Wednesday, September 24, 2008 4:13 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Some help with SMS
? You can then go into the ISMF application and look at what is defined
in
the
> "ACTIVE" configuration. There is likely not much.
OK, how do I do
A.EDU
Subject: Re: Some help with SMS
? You can then go into the ISMF application and look at what is defined
in
the
> "ACTIVE" configuration. There is likely not much.
OK, how do I do that? Below is a cut and paste from the 1st panel when
I
enter the application.
Enter Selection or Com
situation.
-Original Message-
From: Dave Day
Sent: Wednesday, September 24, 2008 1:27 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Some help with SMS
I need some SMS help. I've never had to mess with it before, and
don't have a clue. If there is a quick and dirty way to get what I need
>There is not really a "quick and dirty" way to do this.
As I read the original post, the OP already has SMS implemented.
It should be relatively simple to add the new DASD to the config, but I haven't
done it in years, so I don't recall the steps.
>Again, do you really want SMS for some reason?
e
guide.
Good luck
Ron
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
> Behalf Of Dave Day
> Sent: Wednesday, September 24, 2008 1:27 PM
> To: IBM-MAIN@BAMA.UA.EDU
> Subject: [IBM-MAIN] Some help with SMS
>
> I need some SMS help. I&
ay, September 24, 2008 5:39 PM
Subject: Re: Some help with SMS
I bet John's beat me to it, but the first thing is to go into option 0
and change yourself to an administrator
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Dave Day
Sent: We
14 matches
Mail list logo
