Timothy Sipples wrote:
>Could you use RACF warning mode to get a handle on who's accessing (or not
>accessing) these fonts?
Unless those datasets are protected in GAT. You'll have remove them from GAT
and mark the relevant profile in WARN. You could use NOTIFY if you wish or just
use automati
Warning: It has really be a long time I have worked with AFP and have now some
experience with VPS.
So, take my comments with a little pinch of salt. ;-)
Ed Gould wrote:
>I am *ASSUMING* that VPS cuts type 6 records (SMF).
Yes, your assumption is sort of correct, because it is JES2 which write
Did not realize he was close to O100 years old
On Tue, 25 Mar 2014 08:52:14 +1100 Hank Oerlemans wrote:
:>Doug will have retired from IBM by the end of this month.
:>
:>Much material has been removed and will no longer be available from his
:>site to avoid any perceived conflict of ownership or
In <5228466182930420.wa.paulgboulderaim@listserv.ua.edu>, on
03/24/2014
at 07:11 AM, Paul Gilmartin said:
>I can use FTP (a TCP/IP protocol) to submit jobs to localhost. I
>do not need multiple TCP/IP stacks to do this;
What does that have to do with the price of eggs in China? I asked
Hank,
Thanks for the heads up about Doug. I still use his tools "on a daily basis".
Tools such as ISRFIND, ISRDDN, and TASID to name a few.
Thank you, Doug, for your contribution to ISPF's usefulness and my
productivity!
Bob
-Original Message-
From: IBM Mainframe Discussion List [mai
On Tue, 25 Mar 2014 07:25:35 -0400, Richards, Robert B.
wrote:
>Hank,
>
>Thanks for the heads up about Doug. I still use his tools "on a daily basis".
>Tools such as ISRFIND, ISRDDN, and TASID to name a few.
>
>Thank you, Doug, for your contribution to ISPF's usefulness and my
>productivity!
On Fri, 14 Mar 2014 12:49:42 -0500, John McKown
wrote:
Just catching up after a few days away from IBM-MAIN. I'm sure you've had
lots of responses by now.
>1) Has anybody ever had a VOLSER which was not exactly 6 non-blank
>characters for a regularly used volume? Especially any trailing bla
On Mon, 24 Mar 2014 10:19:06 -0400, Shmuel Metz (Seymour J.) wrote:
>
>Again, that's a similarity rather than a difference, unless you are
>claiming that, e.g., an FTP server can communicate with itself over
>TCP/IP.
>
A single TCP/IP stack "can communicate with itself". Yes.
"over TCP/IP"? It a
Yes, I am reading the book on Metal C. But I often appreciate other
peoples' opinions and ideas. So I'm "just asking".
I am porting some C code to z/OS (nedit thread on MVS-OE). I need to be
able to do z/OS enqueues and dequeues. I don't see any C subroutine to do
this. So I need to write somethin
paulgboul...@aim.com (Paul Gilmartin) writes:
> A single TCP/IP stack "can communicate with itself". Yes.
> "over TCP/IP"? It appears to, although I suspect it short-
> circuits the path.
"localhost" mapping to loopback ip address 127.0.0.1
http://en.wikipedia.org/wiki/Localhost
special-use dom
Hi friends! I just had a new colleague ask me about using CNTL/ENDCNTL
statements in JCL, and I was at a loss. Even after looking it up, I really
can't see why I would use them.
Has anyone had experience with these statements, and can give a couple
real-world examples of how to use them? Is it lik
On 2014-03-25 13:29, John McKown wrote:
Yes, I am reading the book on Metal C. But I often appreciate other
peoples' opinions and ideas. So I'm "just asking".
I am porting some C code to z/OS (nedit thread on MVS-OE). I need to be
able to do z/OS enqueues and dequeues. I don't see any C subrouti
CNTL - Specifies the beginning of program control statements for the
printer.
Examples :
http://publibfp.dhe.ibm.com/cgi-bin/bookmgr/BOOKS/apss9400/9.2.1
Kolusu
IBM Mainframe Discussion List wrote on
03/25/2014 10:53:39 AM:
> From: Bill Ashton
> To: IBM-MAIN@listserv.ua.edu,
> Date: 03/
On Tue, 25 Mar 2014 11:13:42 -0700, Sri h Kolusu wrote:
>CNTL - Specifies the beginning of program control statements for the
>printer.
>
>Examples :
>
>http://publibfp.dhe.ibm.com/cgi-bin/bookmgr/BOOKS/apss9400/9.2.1
>
I wonder why they chose to invent new syntax rather than using
an instream d
Just a final word about purchasing our course materials.
Sunday March 30 will be the last day we offer our course
materials for sale at our standard price of USD 2000 per
course day (with a 15% discount if you order 10 or more
days of training in a single order).
After that, the sale pages will
http://windows.microsoft.com/en-us/windows/end-support-help?ocid=xp_eos_clie
nt
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
John:
I have to look but can you do :
__asm ….inline
Regards,
Scott
From: John McKown
Sent: Tuesday, March 25, 2014 1:29 PM
To: IBM Mainframe Discussion List
Yes, I am reading the book on Metal C. But I often appreciate other
peoples' opinions and ideas. So I'm "just as
I'm looking at the STOW description in:
http://pic.dhe.ibm.com/infocenter/zos/v2r1/topic/com.ibm.zos.v2r1.idad500/d5166.htm
This gives the Member List Format for several directory actions, but not,
AFAICT, for
Add or Replace. Where can I find this information.
Is there a data area macro f
But that's only in Metal C, if I'm reading it correctly. I may do this for
a "learning experience". What I may learn is "don't _do_ that!"
On Tue, Mar 25, 2014 at 2:36 PM, Scott Ford wrote:
> John:
>
> I have to look but can you do :
>
>
> __asm ….inline
>
>
> Regards,
>
> Scott
>
>
>
>
>
> Fr
On Tue, 25 Mar 2014 13:57:16 -0400, Gord Tomlin wrote:
>
>If you are already using LE and XPLINK for the nedit C code, then I'm
>not sure I see the benefit to writing a Metal C subroutine to do the
>ENQ/DEQ. The C code in this case will likely be mostly comprised of
>inline Assembler with the crypt
W dniu 2014-03-25 20:32, Ed Finnell pisze:
http://windows.microsoft.com/en-us/windows/end-support-help?ocid=xp_eos_clie
nt
I don't have Win XP on any of my LPARs. In fact I have never had any.
--
Radoslaw Skorupka
Lodz, Poland
---
Tre tej wiadomoci moe zawiera informacje prawnie chro
I have a COBOL program which flows through MVS storage areas to get the DSN,
VOLSERs, etc. for any open DD. I am currently getting the LRECL and BLOCKSIZE
from the JFCB area. I always get the LRECL. However, for LBI files (> 32k
blocksize) I always get zero for the BLOCKSIZE. This doesn't surpr
IHAPDS
On Tue, 25 Mar 2014 15:03:49 -0500 Paul Gilmartin
wrote:
:>I'm looking at the STOW description in:
:>
:>
http://pic.dhe.ibm.com/infocenter/zos/v2r1/topic/com.ibm.zos.v2r1.idad500/d5166.htm
:>
:>This gives the Member List Format for several directory actions, but not,
AFAICT, for
:>A
On 25 March 2014 16:16, Paul Gilmartin wrote:
>
> Wouldn't it be nice if all the header files were trilingual?
> Assembler/PLS/Metal C? It'll take a while.
Ugh, please. :-( There's nothing wrong with Metal C that a complete
redesign wouldn't fix.
But in any case, what would you do to allow PL/X
This is a theoretical exercise, and I'm a newbie, so please pardon me if this
is basic stuff...
Let's say I have a DASD volume on one system, and it has a user catalog on it
for all the datasets on the volume, and I want to move this volume to a
different system that knows nothing about it curr
The closest that I can find is IHAPDS in SYS1.MODGEN. But you must expand
it with PDSBLDL=NO. The default is YES. The first 8 bytes are the member
name. The next 3 bytes are the TTR. The next byte is an indicator byte.
Therefore the list must be at least 12 bytes. The number of bytes, up to
62, fo
No, but I have it on a PC front-ending my DS6800s. And from what I've been
able to find, IBM doesn't officially support the DS Storage Manager for the
DS6800s on anything more current than XP.
So I have a question for the group. Is anybody out there running the DS
Storage Manager for DS6800s
Multiple ways to do this. A couple that come to mind quickly are:
1. If the disk volume is completely contained on the single volume (ie the
catalog only has datasets on this volume and all datasets on this volume are in
this catalog) you could EXPORT DISCONNECT this catalog on the current sys
I have friends who bought a new PC and it came with windows 8. They
went out and bought a license for XP and installed XP.
People are doing this widespread as WINDOWS 8 (and 7 apparently) are
HATED.
Ed
On Mar 25, 2014, at 3:24 PM, R.S. wrote:
W dniu 2014-03-25 20:32, Ed Finnell pisze:
http
On Tue, 25 Mar 2014 16:32:43 -0400, Tony Harminc wrote:
>On 25 March 2014 16:16, Paul Gilmartin wrote:
>>
>> Wouldn't it be nice if all the header files were trilingual?
>> Assembler/PLS/Metal C? It'll take a while.
>
>Ugh, please. :-( There's nothing wrong with Metal C that a complete
>redesign
http://pic.dhe.ibm.com/infocenter/zos/v1r12/index.jsp?topic=%2Fcom.ibm.zos.r12.idad400%2Fblksz.htm
Do not use the BLKSIZE field in the DCB. The system uses it. Use the
BLKSIZE field in the DCBE. For more information about DCBE field
descriptions see z/OS DFSMS Macro Instructions for Data Sets.
ht
On Tue, 2014-03-25 at 20:48 +, Pommier, Rex wrote:
> And from what I've been able to find, IBM doesn't officially support
> the DS Storage Manager for the DS6800s on anything more current than
> XP.
According to the Architecture and Implementation Redbook:
http://www.redbooks.ibm.com/r
W dniu 2014-03-25 21:41, Ed Gould pisze:
I have friends who bought a new PC and it came with windows 8. They
went out and bought a license for XP and installed XP.
People are doing this widespread as WINDOWS 8 (and 7 apparently) are
HATED.
And the relationship to the IBM-MAIN topic is ?
--
Ra
On 25 March 2014 16:56, Paul Gilmartin wrote:
>>But in any case, what would you do to allow PL/X and C to pick out
>>their own code? The assembler vs PL/X or C comment format makes it
>>easy, but both PL/X and C have /* comments */ .
>>
> #if ?
But how will both PL/X and assembler not see it?
To
On 03/25/2014 03:54 PM, Pommier, Rex wrote:
> Multiple ways to do this. A couple that come to mind quickly are:
>
> 1. If the disk volume is completely contained on the single volume (ie the
> catalog only has datasets on this volume and all datasets on this volume are
> in this catalog) you co
W2K server is dead and gone. Mainstream support for W2K3 is over and extended
support ends 7/14/2015.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of David Andrews
Sent: Tuesday, March 25, 2014 4:37 PM
To: IBM-MAIN@LISTSERV.UA.EDU
On Tue, 25 Mar 2014 17:53:50 -0400, Tony Harminc wrote:
>On 25 March 2014 16:56, Paul Gilmartin wrote:
>>>But in any case, what would you do to allow PL/X and C to pick out
>>>their own code? The assembler vs PL/X or C comment format makes it
>>>easy, but both PL/X and C have /* comments */ .
>>>
On 25 March 2014 18:11, Paul Gilmartin wrote:
>>> #if ?
>>
>>But how will both PL/X and assembler not see it?
>>
> That's their problem. Perhaps AGO for assembler. And hasn't
> PL/X something similar?
Well you can't reasonably ask for trilingual macros and then shrug
your shoulders when asked f
On 25 Mar 2014 14:37:33 -0700, in bit.listserv.ibm-main you wrote:
>On Tue, 2014-03-25 at 20:48 +, Pommier, Rex wrote:
>> And from what I've been able to find, IBM doesn't officially support
>> the DS Storage Manager for the DS6800s on anything more current than
>> XP.
>
>According to the Arch
On 03/25/2014 04:50 PM, R.S. wrote:
> W dniu 2014-03-25 21:41, Ed Gould pisze:
>> I have friends who bought a new PC and it came with windows 8. They
>> went out and bought a license for XP and installed XP.
>> People are doing this widespread as WINDOWS 8 (and 7 apparently) are
>> HATED.
> And the
On Tue, 25 Mar 2014 18:38:14 -0400, Tony Harminc wrote:
>
>Well you can't reasonably ask for trilingual macros and then shrug
>your shoulders when asked for how it might work.
>
Actually, I can. That's an implementation technique. Suppose a
Requirement for trilingual macros were to be submitted t
Speaking of Metal C, I'm seeing a strange thing just recently. My C input
is a VB 255 PDSE member, and the output is an FB 80 PDSE member. Whenever
an input line exceeds 80 characters, the output assembler "source" has a
bogus line with unprintable characters where the wrapped part of the
original
On 25 March 2014 19:03, Paul Gilmartin wrote:
>
> >Well you can't reasonably ask for trilingual macros and then shrug
> >your shoulders when asked for how it might work.
> >
> Actually, I can. That's an implementation technique. Suppose a
> Requirement for trilingual macros were to be submitted
The PDF file for that same V2R1 manual has more information than the original
link, but not a mapping macro. See the 380th page (which has page number 354).
http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/download/DGT3D500.pdf
Or if the V1R13 manual will do, here is a link to the equivalent
On Tue, 25 Mar 2014 19:15:45 -0400, Tony Harminc wrote:
>
>Sigh. By the same token asking for trilingual macros is an
>implementation technique. What is the business problem you want IBM to
>address? Perhaps shipping mappings for all three languages, with
>identical names and such? Then maybe IBM c
That url points to SC23-6852-00. There is a -01 online but it doesn't have
it either. Seems worth an RCF.
FWIW, the 1.11 version of the manual, SC26-7408-08, does have it. I wonder
why they deleted it. I also wonder what changing from SC26 to SC23
signifies.
:>: -Original Message-
:>:
:>: -Original Message-
:>: From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
:>: Behalf Of Elardus Engelbrecht
:>: Sent: Tuesday, March 25, 2014 12:06 AM
:>: To: IBM-MAIN@LISTSERV.UA.EDU
:>: Subject: Re: Which fonts are being actually used?
:>:
:>: Timothy Sipples wro
On Tue, 25 Mar 2014 16:28:00 -0700, retired mainframer wrote:
>That url points to SC23-6852-00. There is a -01 online but it doesn't have
>
Hmmm ... Is there a simple technique for accessing the latest revision of
docs for a given OS release? Should I bookmark the root?
>it either. Seems worth
On Tue, 25 Mar 2014 18:49:04 -0500, Paul Gilmartin wrote:
>On Tue, 25 Mar 2014 16:28:00 -0700, retired mainframer wrote:
>
>>That url points to SC23-6852-00. There is a -01 online but it doesn't have
>>
>Hmmm ... Is there a simple technique for accessing the latest revision of
>docs for a given O
Hi
I am allocating a dataset in a Rex exec using the following syntax
"Alloc fi(myddnam) da('"my.pds.name(member)"') shr"
I get an error routine not found
Sent from my iPhone
--
For IBM-MAIN subscribe / signoff / archive acce
On 25 March 2014 21:50, Micheal Butz wrote:
> "Alloc fi(myddnam) da('"my.pds.name(member)"') shr"
>
> I get an error routine not found
You are calling a REXX function named my.pds.name(member) which
presumably is not what you intended. Why do you have those inner
double quotes?
Tony H.
On 26/03/2014 4:32 AM, Tony Harminc wrote:
On 25 March 2014 16:16, Paul Gilmartin wrote:
Wouldn't it be nice if all the header files were trilingual?
Assembler/PLS/Metal C? It'll take a while.
Ugh, please. :-( There's nothing wrong with Metal C that a complete
redesign wouldn't fix.
I find
On Tue, 25 Mar 2014 21:50:10 -0400, Micheal Butz wrote:
>Hi
>
>I am allocating a dataset in a Rex exec using the following syntax
>
>"Alloc fi(myddnam) da('"my.pds.name(member)"') shr"
>
>I get an error routine not found
>
I believe the parentheses surrounding (member) need to be quoted
lest my.p
What are the variables?
is member a var?
"ALLOC FI(MYDDNAM) DA('MY.PDS.NAME(MEMBER)') SHR "
Or
"ALLOC FI(MYDDNAM) DA('MY.PDS.NAME("member")' ) SHR"
If you are using ISPF to edit the REXX turn on HILITE to REXX and have I
color the code for you.
And if you have not done so, there is a TSO-REX
On 2014-03-25 22:11, David Crayford wrote:
I find that I rarely need Metal/C. What I do want to do is inline
assembler into LE code.
I have found Metal to be useful in a few situations where it is
desirable to have a self-contained program with inline Assembler and no
dependencies on the LE r
On 26/03/2014 11:38 AM, Gord Tomlin wrote:
On 2014-03-25 22:11, David Crayford wrote:
I find that I rarely need Metal/C. What I do want to do is inline
assembler into LE code.
I have found Metal to be useful in a few situations where it is
desirable to have a self-contained program with inlin
On Mar 25, 2014, at 5:55 PM, Joel C. Ewing wrote:
On 03/25/2014 04:50 PM, R.S. wrote:
W dniu 2014-03-25 21:41, Ed Gould pisze:
I have friends who bought a new PC and it came with windows 8. They
went out and bought a license for XP and installed XP.
People are doing this widespread as WINDOWS
On Tue, 25 Mar 2014 22:08:05 -0400, Tony Harminc wrote:
>On 25 March 2014 21:50, Micheal Butz wrote:
>> "Alloc fi(myddnam) da('"my.pds.name(member)"') shr"
>>
>> I get an error routine not found
>
>You are calling a REXX function named my.pds.name(member) which
>presumably is not what you intende
On 26/03/2014 12:25 PM, Paul Gilmartin wrote:
On Tue, 25 Mar 2014 22:08:05 -0400, Tony Harminc wrote:
On 25 March 2014 21:50, Micheal Butz wrote:
"Alloc fi(myddnam) da('"my.pds.name(member)"') shr"
I get an error routine not found
You are calling a REXX function named my.pds.name(member) wh
retired mainframer wrote:
>:>: >As far as I know RACF provides sufficient granularity to define access
>controlled resources for these purposes, so I think it'd work well.
>:>: Via access using program modules, yes.
>The last time it was discussed on RACF-L, there was no RACF processing at the
I have attempted to set a storage alteration PER trap. I was interested in
several 4 byte areas distributed across maybe 2 pages. My intention was to
disable SA monitoring for everything except those 4 byte areas, similar to the
way it is described for IF traps:
SL SET,SA,D,ASIDSA=SA,JOBNAME=xx
61 matches
Mail list logo