Hi Folks,
You can look at the code in IKJEFF10 which is in File 863 of the
CBT collection www.cbttape.org and see how it gets its results.
Below is the File 001 (doc) entry for CBT File 863.
Use it in good health...
Sincerely, Sam
FILE 863 is from Jim Callihan and contains
That would work for TSO Submitted work.
But it would not work for jobs submitted by other means, like INTRDR.
Hence, the need for scheduling software. It manages the submission from its
files. But not from jobs that are not submitted by it.
However, there is information in SMF Type42 on PDS m
I didn't see this whole thread, so I don't know how much of this applies (to
anything), but wouldn't the TSO submit exit be where you could check to see
where the data being submitted came from and put it out as a SYSLOG entry or
insert a comment into the submitted JCL? You can do that from Com
It appears that NFS attempts to create and display NFS timestamps.
But, on Solaris, with a PDS mounted from z/OS, I see:
user@SunOS.5.11: ls -alErt
-rw-rw-rw- 1 root root7608 2016-05-12 18:49:25.498515000 -0600
allasm
...
-rw-rw-rw- 1 root root 177 2016-05-12 18:49
THAT's IT
Thanks
Sent from my iPhone
> On Jun 8, 2016, at 9:41 PM, Blaicher, Christopher Y.
> wrote:
>
> If it is in a key zero CSA subpool, then yes you need to be in key zero.
> Even if you do a fast wait, ie test the completed bit, you will want to clear
> the ECB once it is posted and
If it is in a key zero CSA subpool, then yes you need to be in key zero. Even
if you do a fast wait, ie test the completed bit, you will want to clear the
ECB once it is posted and to do that you will need to be in key zero.
Anyway, if you aren't in the right key, you'll get an 0C4 fast enough.
Do I have to be in key 0 to wait on ecb in CSA
Sent from my iPhone
> On Jun 8, 2016, at 2:11 PM, Greg Dyck wrote:
>
>> On 6/8/2016 7:07 AM, michelbutz wrote:
>> The XMEM post is being done from a FRR resulting from an abend in a SRB the
>> SRB is the primary address space
>
> Putting an ECB
On 6/8/2016 7:07 AM, michelbutz wrote:
The XMEM post is being done from a FRR resulting from an abend in a SRB the SRB
is the primary address space
Putting an ECB in common storage is allowed, but great care must be
taken when doing so.
As has already been said, if issuing the POST from ano
Jon Butler wrote:
You might try the PRODUCT FINDER -- "Select a Product" option. If you enter ISPF it will
bring up the ISPF "home" page
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...
Not by my computer but will do shortly
Sent from my iPhone
> On Jun 8, 2016, at 1:28 PM, Binyamin Dissen
> wrote:
>
> That should not be an issue. Also, that the ECB is in the primary is not
> relevant for the POST service.
>
> As always, show you code.
>
> You can SLIP for an abend in SRB
That should not be an issue. Also, that the ECB is in the primary is not
relevant for the POST service.
As always, show you code.
You can SLIP for an abend in SRB mode and see what it shows.
On Wed, 8 Jun 2016 10:07:54 -0400 michelbutz wrote:
:>The XMEM post is being done from a FRR resulting
Thanks
We are running connect enterprise 3.1. Are there any manual ?
On Jun 8, 2016 9:18 PM, "Steve Thompson" wrote:
> On 06/08/2016 04:41 AM, Jake Anderson wrote:
>
>> Hello,
>>
>> I am trying to move the Connect Enterprise from Production to Development.
>> So what are pr-requisite required to
On Wed, 8 Jun 2016 11:40:26 -0500, Jon Butler wrote:
>You might try the PRODUCT FINDER -- "Select a Product" option. If you enter
>ISPF it will bring up the ISPF "home" page
>
Then, unintuitively, following a "Support" link, I get to a page alluringly
titled "Product documentation (manuals) for
Hi Linda ,
While searching through the archives , i was able to find this post
https://www.mail-archive.com/ibm-main@bama.ua.edu/msg88192.html
This has got a similar discussion
On Wed, Jun 8, 2016 at 8:27 PM, linda golding
wrote:
> Thanks Curt ... For shared DASD devices , UCW is s
You might try the PRODUCT FINDER -- "Select a Product" option. If you enter
ISPF it will bring up the ISPF "home" page
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu wit
On Tue, 7 Jun 2016 11:40:46 +, william janulin wrote:
>It has some good points. ...
>
It seems the browser back arrow now returns me to the previous page scrolled
as I left it, not scrolled to the top. Yy!
Searching for manual titles? Entering ISPF in the text box finds numerous
chapt
On 06/08/2016 04:41 AM, Jake Anderson wrote:
Hello,
I am trying to move the Connect Enterprise from Production to Development.
So what are pr-requisite required to move.
Are there any manuals which talks about moving the Connect Enterprise from
Prod to Development.
Does anyone has a experience
Thanks Curt ... For shared DASD devices , UCW is same in HSA which is used
to serialize when IO requests from multiple LPARS arrives to the same
device .
I was expecting something similar for console devices . But it appears that
that is not the case for consoles . I hope the hardware gurus in thi
The XMEM post is being done from a FRR resulting from an abend in a SRB the SRB
is the primary address space
Sent from my iPhone
> On Jun 8, 2016, at 9:44 AM, Binyamin Dissen
> wrote:
>
> Even if the ECB is in CSA, a cross-memory post must be used if the home
> address space is not the waiti
On Wed, Jun 8, 2016 at 8:44 AM, Binyamin Dissen
wrote:
> Even if the ECB is in CSA, a cross-memory post must be used if the home
> address space is not the waiting address space.
>
>
Very good point! IIRC, the contents of the ECB while it is "actively" (so
to speak) being waited upon contains t
Even if the ECB is in CSA, a cross-memory post must be used if the home
address space is not the waiting address space.
On Wed, 8 Jun 2016 09:03:45 -0400 michelbutz wrote:
:>I'll double check the wait bit X'80' is on after the wait thanks
:>
:>Sent from my iPhone
:>
:>> On Jun 8, 2016, at 9:00
On Jun 8, 2016, at 5:22 AM, linda golding wrote:
>
> For every device , there has to be a UCW in HSA . If the ports can be
> shared between lpars , how are they going to be physically different ?
>
> Agree that they are unique logical devices (UCB ) on each LPAR . But that
> doesn't mean they ha
I'll double check the wait bit X'80' is on after the wait thanks
Sent from my iPhone
> On Jun 8, 2016, at 9:00 AM, John McKown wrote:
>
>> On Tue, Jun 7, 2016 at 9:17 PM, michelbutz wrote:
>>
>> Hi
>>
>> The documentation says for ECBLIST
>> All ecb's must be in the home address
>> Space. D
On Tue, Jun 7, 2016 at 9:17 PM, michelbutz wrote:
> Hi
>
> The documentation says for ECBLIST
> All ecb's must be in the home address
> Space. Does that mean addressable from the
> Hone address space
>
> As I have 1 ecb's in the home address space
> And 1 in CSA
> Thanks
>
I am sure that will
I have a request to see if we can turn on wire-compression for sftp. We are
using Cozbatch for SFTP (SSH), I have done some testing using the -C parameter
as shown below but I can't confirm if this is working? Would this be correct?
If not, can anyone shed some light on this?
Thanks Matt
Co:Z
*If you’re talking about OSA-ICC consoles, then the physical port can be
shared between LPARs, and two LPARs can have the same device numbers
sharing that port, but they are still unique logical devices and have
different TN3270 LU names*
For every device , there has to be a UCW in HSA . If the p
u der ???
On Wed, Jun 8, 2016 at 2:25 PM, Mainframe Mainframe wrote:
> u der?? need help
>
> On Wed, Jun 8, 2016 at 2:11 PM, Jake Anderson
> wrote:
>
>> Hello,
>>
>> I am trying to move the Connect Enterprise from Production to Development.
>> So what are pr-requisite required to move.
>>
>> Ar
u der?? need help
On Wed, Jun 8, 2016 at 2:11 PM, Jake Anderson
wrote:
> Hello,
>
> I am trying to move the Connect Enterprise from Production to Development.
> So what are pr-requisite required to move.
>
> Are there any manuals which talks about moving the Connect Enterprise from
> Prod to Dev
The EDCXEPLG generates member id of AL1(3), which is C/C++. I was expecting
AL1(15), which is assembler. The AL(3) is hard code in the macro. Is this a
bug, or have I missed something?
Thanks
APROGXP EDCXPRLG EXPORT=YES
APROGXP ALIAS C'APROGXP'
XR3,3
EDCXEPLG
E
Hello,
I am trying to move the Connect Enterprise from Production to Development.
So what are pr-requisite required to move.
Are there any manuals which talks about moving the Connect Enterprise from
Prod to Development.
Does anyone has a experience on doing this and would like to share ?
Regar
30 matches
Mail list logo
