Lennie, VTOC / Index will be first. Anything with VVDS will come later.
Thanks.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
ted on
z/OS. Since the storage is thinly provisioned, DFSMS will provide support to
help clients manage the difference between logical and physical storage
consumption.
Glenn Wilcock
DFSMS Chief Product Owner
--
For IBM-MAIN
Please note that it is on our 'short list' of improvements to avoid selecting
volumes that will fail data set allocation due to a full VTOC or VTOC Index.
Glenn Wilcock
DFSMS Chief Product Owner
--
For IBM-MAIN
amount of storage is
also significantly reduced.
Glenn Wilcock, DFSMS Chief Product Owner
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Another option is IBM Cloud Tape Connector. One of its capabilities is Virtual
Tape Replication, which replicates tape data sets to cloud object storage. If
interested in finding out more, please email me at wilc...@us.ibm.com and I
can connect you with the SME. Thanks.
I sent your question to Joe Swingler, TS7700 architect and replied as follows:
"As of today, a single TS7700 can be either cloud attached or tape attached,
but not both. So, a third TS7700C would be needed or one of the two tape
attach boxes would have to become only cloud attached.&qu
I should have added that EXPIREBV will run for a while if you haven't run it
for some time. So, do it over a weekend. Glenn
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.e
You'll need to run EXPIREBV.
Glenn Wilcock
DFSMS Chief Product Owner
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
data sets whose most recent version is empty.
Glenn Wilcock
DFSMS Chief Product Owner
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Thanks Mike.
ABARS is great for this type of use case. ABACKUP with the MOVE option will
backup all data types (no recall for migrated data) and delete the original
copies, including the migrated data sets. Thus creating a single backup of all
of the related data. Essentially, an Archive typ
There is also DS8000 Transparent Cloud Tiering. For TS7700 Clients, TS7700
Cloud Storage Tier is an excellent way to maintain SLAs and also leverage cloud
storage for cold data.
Overview of IBM z/OS object storage solutions:
https://community.ibm.com/community/user/ibmz-and-linuxone/viewdocumen
user/ibmz-and-linuxone/groups/topic-home/blog-entries?communitykey=3c6c69c1-abde-4ee6-b603-19ef14942e8f";.
Glenn Wilcock, DFSMS Chief Product Owner
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
Hey Ed, we haven't really been advertising this function because of the DS8K
copy services restriction. Besides FlashCopy, it means that only simplex
volumes are eligible (no Metro or Global Mirror relationships). When creating
FlashCopy Full Volume copies, Incremental FlashCopy is still a bes
Hi Bill, this is a licensed manual. Please direct questions to its owner,
Andrew Wilt. anw...@us.ibm.com Thx.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the m
For those interested in leveraging cloud object storage, please refer to the
z/OS 3.1 preview announce that included a reference to a new DFSMS access
method for cloud data - Cloud Data Access (CDA). It is built on top of the Web
Enablement Toolkit and simplifies authentication and put/get/etc
Redpaper: https://www.redbooks.ibm.com/redpapers/pdfs/redp5705.pdf
Abstract:
In the recent Application modernization on the mainframe IBM Institute for
Business Value study, among the
surveyed, 71% of executives say that mainframe-based applications are central
to their business strategy. As
s
This post from Ross is a must read for this topic:
https://www.linkedin.com/pulse/results-mainframe-application-modernization-migration-ross-mauri/
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
For future reference, HSM DCOLLECT reports are also available if you want
reports for larger amounts of information.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with t
f the application is already compressing and or
encrypting the data and enable/disable TS7700 compression as appropriate.
Glenn Wilcock,
DFSMS Chief Product Owner
--
For IBM-MAIN subscribe / signoff / archive access instructions,
SHOLD command to
indicate high and low thresholds. Backup only applies if you want to
additionally create a backup copy of the data sets. Backup doesn't delete the
data sets after the backup, so you'll essentially have 2 copies.
Glenn Wilcock
DFSMS Chie
/Cloud_Object_Utility_Pub_updates.pdf
Glenn Wilcock, DFSMS Chief Product Owner
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Hi Tom, you're not alone! I've added an attachment of the pdf at the same
link. Viewing the pdf in full-screen mode gives you the same navigation, but
removes all of the animation so that you can go at your own speed...
--
For
I often get asked what solutions are available to leverage cloud object storage
solutions on z/OS. I'm working on a slideshow introduction to the solutions
that IBM offers. I plan to add a voice-over and some navigational
enhancements, but wanted to share what I have so far. Please feel free
Hey Jake,
Even if you didn't get an ARC0745, I recommend following the steps of that
message. You need to see what your current backup copies are cataloged as. If
you don't have any, allocate as many as backup copies that you will be keeping.
Notice that you have to allocate them for the MCD
For folks on this thread who would be interested in doing this via cloud object
storage, DFSMS is looking for sponsor users. You'll need an NDA to
participate. Please reply to me via wilc...@us.ibm.com if you're interested.
Thx.
---
If the data set is defined as BWO eligible, then DSS logic (data mover for HSM)
can handle backing the data set up while open.How frequently a backup copy
is created is determined by management class (SMS) or HSM policy (nonSMS). If a
CI/CA split occurs during the backup, then it will be fai
Glad that you were able to solve it!
If you have other questions, please feel free to reach out directly...
wilc...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.
Hi, I'm not familiar with QUERYSET, but there is a single thread that processes
certain commands (QUERY, LIST, etc), so it's possible that the QUERY was queued
up behind one or more other commands that took longer to run.
--
For
FYI - Here's a link to 8+ hours of video recordings of DFSMShsm Education:
https://ibm.ent.box.com/v/DFSMS-Academ-DFSMShsm2021/folder/133296597964
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Yes, the access and modification times are preserved. But, the change time is
updated because the metadata is changed due to update the last backup
timestamp. But, as indicated, if the wildcarding selects only those files to
be archived, the backup and delete can be done with a single command.
DFSMShsm supports wildcards and has exclude capabilities. It will even do a
DELETE if you want to delete all of the files after the backup.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists..
://ibm.ent.box.com/v/DFSMS-Academ-DFSMShsm2021
Glenn Wilcock
DFSMS Chief Product Owner
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Hi Robert, if your shop uses DFSMShsm, I have some charts that I can share with
you that show the significant advantages of using zEDC for backup and
migration. zEDC is the #1 Best Practice for DFSMShsm.
--
For IBM-MAIN subscrib
Dave, HSM has 2 methods to dynamically address volumes going over threshold:
Interval Migration and On Demand Migration. Interval Migration runs hourly and
processes volumes that went over threshold during the previous hour. The
preferred method is the On Demand Migration technique. With ODM,
Hi Cameron, to answer your base question... No, ADRDSSU does not support
decrypting an encrypted file during the dump process.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.
There is a Redbook for EAV:
https://www.redbooks.ibm.com/abstracts/redp5364.html?Open
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
HSM GA'd March 31, 1978. I don't know when release 2 went out.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
"If you don't quote at least a tiny bit of what you are saying no to it is
difficult to tell what the question was, and as a result difficult to gain much
insight from your answer.
Charles"
Charles, it was in reply to this thread... What's the magic to getting the
original message included in
Unfortunately, no. As the product owner of DFSMShsm, I was passed down the
original announce for the product, but it's the internal IBM Confidential
version. You think that we would have all of this stuff Migrated off to a reel
tape somewhere :)
Friday fun fact... In an informal survey that
We've been vexed with this for some time. We, the DFSMS org, have wanted to
update this for some time. But, we've run into these same issues, probably
even more so since we are the product owners. So, first, thanks so much for
working on this! SHARE presentations are a good idea, but wonderi
Hi, glad that you got past the problem. Would you mind sharing what solved the
issue? I wouldn't expect that a setup issue to cause an 0C4 Abend, so I would
like to see if there is something we can do on our end to detect the condition
and have more user friendly messaging. Thanks, Glenn
---
Ed,
Glad to hear that it is working out for you! TCT will be a perfect addition.
1) HSM does provide data set level recovery from copy pools, just differently
:) If the data set has not been deleted or moved since the backup, it's
supported w/o a catalog capture. To support recovery for dele
Hey Ed,
Chatted with some DFSMS folks about what you want to do. First, you are
correct. The HSM FR support is only for SMS-managed volumes. It is tightly
integrated with several SMS constructs for managing the volumes and policy.
(In the future, feel free to send me a direct email to save
Hi Terri,
You have the correct HSM setting - INUSE(...) HSM traps on the ADR412 message
to know that DSS failed serialization and that it should be retried. Do you
see a subsequent DSS Dump for the data sets that initially failed (a retry w/o
serialization)?
-
We're happy to announce the creation of the online z/OS DFSMS Community, which
is part of the larger IBM Community! Our community webpage contains blogs to
advertise new function (z/OS Releases and Continuous Delivery), advertise
upcoming events (SHARE, IBM TechU, DFSMS Academies, etc), have Dis
Hi Chuck, We have clients who regularly use this function for what you plan on
doing. I'll reach out to the individual who owns the ticket and make sure that
it makes progress. Thanks.
--
For IBM-MAIN subscribe / signoff / arc
DFSMShsm Migrate/Recall and DFSMSdss use the DS8000 to offload data directly to
cloud object storage. S3 compliant object stores, including AWS, are
supported. When the object store is unavailable for any reason, you'll get
user friendly messages from HSM/DSS that indicate the specific error b
Hi Theo,
HBACK is a data set backup command. Data set backup settings are determined by
the SETSYS DSBACKUP parameters, of which the default for TAPE tasks is 2.
Please update your SETSYS DSBACKUP parameters such that all backups will go to
disk.
-
For those following this thread who have a DFSMShsm license, HSM does support
this. It can backup all files, files based on wildcards and exclude specific
files as directed by an EXCLUDE. A UNIX shell command is also available, to
perform the HSM backups/recoveries directly from UNIX.
Glenn
--
The TS7700C provides a really nice option for what you are being asked to do.
You can continue to take the backup copies that you do today, and have the
TS7700 seamlessly migrate them out to the cloud for you. Best of both worlds!
If you want to go directly to the cloud, the DFSMShsm/dss, DS8K
DFSMSdss supports host-based encryption on it's dump command. The support was
added before tape encryption became generally available. Still a possible
solution for you since your tape environment doesn't support encryption.
Glenn
--
was corruption/loss and how much your willing to invest in keeping backup
copies for at least that long.
Glenn Wilcock
DFSMS Chief Product Owner
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Hi KB, IBM-MAIN is great. There are shops that are all primary disk. Just
make sure that you are aware of all of the considerations before going down
that route. (The ones that I'm aware of are still HSM users to take advantage
of ML1, class transitions, and backup). A few responses to your fo
l of your sites so that you can do a
logical recovery after a physical fail over. This makes the cost add up even
more quickly. TCT is another good option for this. You can keep 1 or 2 copies
on disk and then have HSM migrate/expire the older backup copies to cloud
object storage which is then av
ter, there is a
section names 'SETSYS fast-path for DFSMShsm Functions'. In this section you
will find a table with the parameters that affect tape processing. But, Chapter
10 of the DFSMShsm Implementation & Customization Guide is an exhaustive guide
for establishing the DFSMSh
If you have DFSMShsm, HSM has a simple MIGRATE DSNAME(dsname) MOVE command that
will invoke SMS ACS for volume selection and move the data set (any type) to a
new volume. Under the covers, HSM invokes DFSMSdss COPY w/ DELETE, w/o you
having to create all of the JCL based on data set type.
It c
Hi Lizette,
It allows different WLM settings. For example, a MAIN can do RECALLS and have
a higher WLM goal than an AUX host that is assigned to run a migration window
with a lower goal. I've never actually worked with a client to do this...
---
It is Newsletter 2018 No. 4
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
. It's a popular presentation
from IBM TechU and SHARE. One of the topics is to reduce the MAX tasking level
to reduce peak MIPS during HSM windows. Just send me an email.
Glenn Wilcock, DFSMS Architecture
wilc...@us.ibm.com
HSM's usage of RLS Access for the control data sets is driven by the PROCLIB
value for CDSSHR. CDSSHR=RLS indicates that HSM should access the CDSes in RLS
mode. If CDSSHR is not specified, or has any other value, then you are not
using RLS for HSM.
DCOLLECT behaves this way because it is not
The next evolution of Hierarchical Storage Management is here with the
announcement of TS7700 DS8000 Object Store! This evolutionary capability
enables DFSMShsm to migrate data directly between IBM DS8000 Disk and TS7700
Virtual Tape without the data passing through the Z host! Check out more at
Two recent z/OS DFSMS Continuous Delivery projects:
- OA57454 Added DELETE (Archive) capability to HSM File Level Backup Support
(base support in OA52703)
- OA57173 Added initial support for FlashCopy to Global Mirror Primaries
(https://www.ibm.com/developerworks/community/blogs/e0c474f8-3
If it happens again, open a pmr. ISPF uses device type to determine if
MIGRAT'x' corresponds to ML'1', ML'2' or ML'C'. Since you are seeing a 'C',
but have never targeted 'C'loud object storage, there could be a defect in
which the device type is not being set appropriately. Thx.
---
Certainly. We are just trying to utilize new avenues for disseminating
information. One size never fits all. In a recent LinkedIn post, I documented
all of the DFSMShsm RFEs that are included in V2R4:
RFE 121915: (SHARE MVSS) Quiesce window for interval and on-demand migration
Request: HSM a
The DFSMS team recently created a LinkedIn Group for z/OS DFSMS:
https://www.linkedin.com/groups/12238880/ Join the group to stay current on
the latest enhancements, tips, news, etc. For example, while z/OS release RFAs
describe all of the major enhancements in a release, they don't include al
Documentation link is now live:
http://publibz.boulder.ibm.com/zoslib/pdf/OA52703.pdf
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
We just finished up an early test with a handful of clients and are in the
process of closing all of the V2R3 APARs. (Due to preReq's, they all can't
close at the same time). The plan is for all of the ptf's to be available in
May. The support will be in the base of V2R4. Thanks, Glenn
---
Have been wanting to add Query ODS for a while, along with making QUERY it's
own task. RFE 65675 requests this. The more votes, the better the odds...
Regarding the main thread, the REPORT command is limited, but the Report
Generator support enables customized reports of the HSM SMF and CDS re
s (a total of
23). The aforementioned APAR to process data sets with undefined data set orgs
being one of them.
Glenn Wilcock
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.u
since some
clients reported that a large number of these data sets were consuming a large
amount of primary storage and HSM was not able to process them.
Glenn Wilcock
--
For IBM-MAIN subscribe / signoff / archive access instruc
HSM uses the Base Data Component to determine data set migration eligibility.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Hi Jake,
Redbooks are always a great place to start to learn the basics. Both DFSMShsm
and rmm have primers. Refer to the PROCLIB and PARMLIB members of each to
understand how they are each currently configured.
Glenn Wilcock
DFSMShsm Architect
at you are trying to
solve.
While we always welcome RFEs, just want to say up front that unless there are
many additional votes from other clients also requesting this type of
enhancement, it's unlikely that a unique request like this will ever make it
high enough in our backlog that it will
Hi, we have not yet publicly announced a date. If you have a nonDisclosure
Agreement, we can discuss offline. Thx, Glenn
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
Please refer to this Statement of Direction regarding the intent to enhance
DFSMShsm and DFSMSdss to backup and recover individual files within a zFS.
https://www-01.ibm.com/common/ssi/cgi-bin/ssialias?infotype=AN&subtype=CA&htmlfid=877/ENUSZP18-0290&appname=lenovospain&la
MULTISYS
issue. The PE fix should be available in the near future.
Glenn Wilcock
DFSMShsm Architect
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
manage? (Total tapes defined to HSM,
regardless of logical or physical)
- What's the total number of migrated data sets that you have?
- What's the total number of backed up data sets that you have?
Thanks! I look forward to seeing y
recommend referring to
the following Redbook: DFSMShsm Fast Replication Technical Guide.
Glenn Wilcock
DFSMShsm Architect
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the
Correct. 'MCDS' is the default. You just need to specify one of the backup
keywords. Glenn
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MA
significant CPU
reduction, elimination of 16K block writes and elimination of RECYCLE
processing.
Glenn Wilcock
DFSMShsm Architect
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.
destroyed. Additionally, IBM is
gathering client feedback regarding extending this functionality to an entire
enterprise.
Glenn Wilcock
DFSMS Architect
--
For IBM-MAIN subscribe / signoff / archive access instructi
management class. In fact, in z/OS
V2R1 and higher, the HSM class transition support can be used to change the
management class, storage class and/or storage group based on policy (note that
data class is excluded). In z/OS V2R2, the HSM MIGRATE TRANSITION command can
also be used.
Glenn Wilcock
Specifically, MCDDLC (Creation date stored in MCD) is copied to UMCREDT in the
'M' record for DCOLLECT. Further, the DFSMS Report Generator function can be
used to process DCOLLECT M records to pull just the records that you want.
Refer to Chapter 14 of the DFSMShsm Storage Administration. Gl
Besides the Redbooks, a good place to start is the 'z/OS DFSMS Using New
Functions' manual.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Hi Theo,
Yes, SPMGCLTR was introduced in the ACS routines in 2.1. It is used by HSM for
transitions for structured data, opposed to CTRANS which is used by OAM for
unstructured data.
I was incorrect in my earlier post. After communicating with the developers,
they indicated that management c
Hi Theo,
Change:
IF &ACSENVIR = 'SPGMCLTR' THEN
SELECT (&MGMTCLAS)
WHEN ('USRTIER1')
SET &MGMTCLAS = 'USRTIER2'
OTHERWISE SET &MGMTCLAS = &MGMTCLAS
END
to:
IF &ACSENVIR = 'SPGMCLTR' THEN
SET &MGMTCLAS = 'USRTIER2'
END
This obviously overly simplifies it, unless you onl
the existing class and just set the
class/group to a specific value, that it will get around this problem.
Glenn Wilcock
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
You are correct. 'PREPARE' only creates an ABR record. No verification or
data movement occurs.
Glenn Wilcock
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.ed
olume until the low
threshold is reached. (2) Enable PATCH .MGCB.+26 X’FF’, which indicates that
HSM should issue additional ARC0734I messages to indicate why data sets weren't
selected for processing. (This patch is documented in the DFSMShsm Diagnosis
manual).
Glenn Wilcock
DFSMShsm
HSM waits for the SMSVSAM server to restart. After the server
restart, HSM will automatically retry all of the I/Os that were held. The only
I/Os that have to be failed are Update I/Os after a Read for Update, when the
Read for Update was before the server error.
Glenn Wilcock
DFSMShsm
ld cause HSM to recover data from
the Week 1 VTOC copy. If the above don't apply, then a pmr could be opened to
analyze the situation.
Glenn Wilcock
DFSMShsm Architect
--
For IBM-MAIN subscribe / signoff / archive access instruc
wild cards when a user is
recalling data.
Thanks,
Glenn Wilcock
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
HSM (myself) to discuss the
various options available to backup DB2 data. I'll set up a call.
Glenn Wilcock
DFSMShsm Architect
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
t any creates, extends, renames and
deletes during the dump. Active data would be a Fuzzy backup if it is not
being quiesced during the dump, but it would still be dumped.
What are you seeing when you indicate that no data is backed up?
Glenn Wilcock
DFSMShsm Arch
Hi,
You can also try LIST PRIMARYVOLUME ALLDUMPS BCDS. (You may have to specify a
specific volser).
Glenn Wilcock
DFSMShsm Architect
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
It uses IBM FlashCopy, which both Hitachi and EMC support. (We have clients
with a mixed vendor storage environment who have implemented this solution).
Glenn
--
For IBM-MAIN subscribe / signoff / archive access instructions,
s
ical loss. This solution can also be used for SAP systems,
when DB2 is the database.
Glenn Wilcock
DFSMShsm Architect
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu w
very needs
and then determine which backup technique will best fit those needs.
Glenn Wilcock
DFSMShsm Architect
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the mes
Control Area becomes
empty, CA Reclaim will automatically free up that space, which is a primary
need to run a reorg.
Glenn Wilcock
HSM Architect
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Hi,
The HSM ML2 Disk support is very basic with no plans to enhance it. For
clients who don't want physical tape anymore (for whatever reason), they
generally select either a disk-only VTS ML2 or implement all ML1. If you go
all ML1, I would recommend implementing ML1 Overflow volumes to help
1 - 100 of 124 matches
Mail list logo
