t...
Paul
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Samuel Alejandro Díaz Chávez
Sent: Sunday, June 16, 2024 2:04 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: WS JES2 SPOOL OFFLOAD
The problem is that I don't see a time-based option. That is why I am asking
for your s
Asunto: Re: WS JES2 SPOOL OFFLOAD
Classification: Confidential
Check the selection criteria in the $TOFFLOAD command, It should do what you
want,
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Samuel Alejandro Díaz Chávez
Sent: Thursday, June 13, 2024 9:46 PM
T
: WS JES2 SPOOL OFFLOAD
[CAUTION: This Email is from outside the Organization. Unless you trust the
sender, Don’t click links or open attachments as it may be a Phishing email,
which can steal your Information and compromise your Computer.]
Good evening and best regards to all.
I would like to
Good evening and best regards to all.
I would like to ask about an issue which is new for those of us who are
implementing the SPOOL OFFLOAD option.
But we want to generate the SYSOUT transmit to the OFFLOAD file, but we want
the selection or the option to be for the time that the output has in
Hi Wayne,
That's the command I learned in the mid-'70s before I had access to SPF.
I've also used it at DR Sites when one or more PDSs in one or more of my
ISPF concatenations has not yet been restored, leaving me stuck in TSO.
Regards,
David
On 2023-09-30 04:59, Wayne Bickerdike wrote:
For D
RGEN X is great. It came in very handy when we had SPOOL output that
emanated from a third party product that was difficult to archive in a
manner that could be retrieved later (Jobname was not meaningful).
Used RGEN X to dissect the output and wrap a meaningful Job name and Job
class around it. N
For Dinosaurs:
OUT Jobxxx PR(FRED) HOLD KEEP
On Fri, Sep 29, 2023 at 9:03 PM Kirk Wolf wrote:
> FWIW, Co:Z SFTP has full support for JES spool files, but there are also
> Co:Z shell commands for using JES2/3.
>
> example:
>
> *> todsn //intrdr < *//BR14 JOB 'KIRK',MSGCLASS=X**
> **// EXEC PGM=I
FWIW, Co:Z SFTP has full support for JES spool files, but there are also Co:Z
shell commands for using JES2/3.
example:
*> todsn //intrdr < lsjes
*JobidJobname OwnerStatus Class Completion
JOB00853 BR14 KIRK OUTPUT A RC=
JOB00852 KIRKTKIRK OUTPUT A RC=0
On Fri, 29 Sep 2023 15:27:37 +, Rob Scott wrote:
>To generate sample SDSF REXX - issue the "RGEN X" command and choose an
>example from the list - there are the following including :
>
>Browse job output with EXECIO
>Browse job output with ISFBROWSE
>Browse job output with ISFBROWSE - groups
How about IBM Z Open Automation Utilities, there is a free version without
subscription and support.
jls to find the job id
https://www.ibm.com/docs/en/zoau/1.2.x?topic=reference-jls
ddls to list ddnames for a given job id
https://www.ibm.com/docs/en/zoau/1.2.x?topic=reference-ddls
then pjdd to p
al Message-
From: IBM Mainframe Discussion List On Behalf Of
Roberto Halais
Sent: Friday, September 29, 2023 4:25 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Utility to Read from JES2 spool
EXTERNAL EMAIL
Thank you all. You have given me many options.
Back to the drawing board.
On F
Thank you all. You have given me many options.
Back to the drawing board.
On Fri, Sep 29, 2023 at 11:09 AM Michael Babcock
wrote:
> Programmatically or manually? Manually, in SDSF, you can always put a
> question mark next to the output and put an XDC next to the output you
> want. Or skip the
Programmatically or manually? Manually, in SDSF, you can always put a
question mark next to the output and put an XDC next to the output you
want. Or skip the question mark and XDC the entire job. See the SDSF help
for XDC.
On Fri, Sep 29, 2023 at 9:10 AM Roberto Halais
wrote:
> Listers:
>
>
I think you could do this using the SDSF REXX facilities.
Lennie
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Roberto Halais
Sent: 29 September 2023 15:10
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Utility to Read from JES2 spool
Listers:
Is there an z/os utility
U
Subject: Utility to Read from JES2 spool
Listers:
Is there an z/os utility that will allow the reading of a spool file (in some
class) and copy it to a sequential dataset?
We need to read a report from spool and copy it o a sequential dataset.
Just a z/os utility or a CBT tape utility.
Thank yo
Thank you,Mark.
I’ll check it out.
On Fri, Sep 29, 2023 at 10:13 AM Mark Jacobs <
0224d287a4b1-dmarc-requ...@listserv.ua.edu> wrote:
> The JES2 external writer will do just that. Proc XWTR in SYS1.PROCLIB.
>
> Mark Jacobs
>
>
> Sent from ProtonMail, Swiss-based encrypted email.
>
> GPG Public
https://groups.google.com/g/bit.listserv.ibm-main/c/vj_iGeqFm2o/m/B0wZHzbNNv8J
On Fri, Sep 29, 2023 at 9:10 AM Roberto Halais wrote:
>
> Listers:
>
> Is there an z/os utility that will allow the reading of a spool file (in
> some class) and copy it to a sequential dataset?
>
> We need to read a r
The JES2 external writer will do just that. Proc XWTR in SYS1.PROCLIB.
Mark Jacobs
Sent from ProtonMail, Swiss-based encrypted email.
GPG Public Key -
https://api.protonmail.ch/pks/lookup?op=get&search=markjac...@protonmail.com
--- Original Message ---
On Friday, September 29th, 202
Listers:
Is there an z/os utility that will allow the reading of a spool file (in
some class) and copy it to a sequential dataset?
We need to read a report from spool and copy it o a sequential dataset.
Just a z/os utility or a CBT tape utility.
Thank you for any pointers.
--
I found this link https://developer.ibm.com/articles/jes2-privilege-support/ to
the article, brilliant, thanks Ravi.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with t
As some of us has mentioned about $DLIMITS(SPOOL),LONG command and found it
interesting ...so i thought to drop an additional point here...if you get time
read JES2 Privilege resource as that's where this command is mentioned with
some of the nice way of getting spool shortage situation allevia
mation) - a high level view of resource usage
> for both non-privileged and privileged resource usage
> >
> >(o) RM (and RMA) - JES2 resource monitor overview and alerts
> >
> >(o) ST command with a filter for TGNUM (track group usage number) or
> TGPCT (track group pe
group usage number) or
TGPCT (track group percent)
Be aware that the ST panel could take a while to gather the data as
some of the displayed fields require JES2 spool I/O
If you have spool issues on a regular basis, then automated
operations can help schedule JES2 operator commands to mainta
privileged resource usage
(o) RM (and RMA) - JES2 resource monitor overview and alerts
(o) ST command with a filter for TGNUM (track group usage number) or TGPCT
(track group percent)
Be aware that the ST panel could take a while to gather the data as some of the
displayed fields require JES2 spool
(track group percent)
>Be aware that the ST panel could take a while to gather the data as some of
>the displayed fields require JES2 spool I/O
>
>If you have spool issues on a regular basis, then automated operations can
>help schedule JES2 operator commands to maintain output
iew and alerts
(o) ST command with a filter for TGNUM (track group usage number) or TGPCT
(track group percent)
Be aware that the ST panel could take a while to gather the data as some of the
displayed fields require JES2 spool I/O
If you have spool issues on a regular basis, then automated oper
Hello
Recently for one of our LPAR seeing a spool percentage of 50%.
With $DJOBQ,SPOOL=(%5) Shows me only one job which is taking 6% of spool. I
have tried purging all outputs which are 7 days older but there is no
relief to the spool percentage
Tried purging TSU outputs, STC output too but no l
SyzSpool/z is certainly an option and it does extract the sysout from JES and
places it in containers on DASD, but it doesn't compress (except what is done
by SMS on it's behalf) and it relies on HSM, ABR or DF/Dss (or similar) to
offload the sysout from DASD. But you are correct that it's bot
BM-MAIN@LISTSERV.UA.EDU
> Date: Wednesday, 31 March 2021 1:06 PM CDT
> Subject: Re: jes2 spool
>
> One more option to consider. We have run VPS for years. When COVID hit, no
> one could go into their normal office--where VPS printers are located. Users
> asked us (infrastruc
Wednesday, 31 March 2021 1:06 PM CDT
Subject: Re: jes2 spool
One more option to consider. We have run VPS for years. When COVID hit, no one
could go into their normal office--where VPS printers are located. Users asked
us (infrastructure) if there was any way to get a windows viewable copy o
Message-
From: IBM Mainframe Discussion List On Behalf Of
Tony Thigpen
Sent: Wednesday, March 31, 2021 7:38 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: (External):Re: jes2 spool
*** EXTERNAL EMAIL - Use caution when opening links or attachments ***
If you want cheap, as in free, but still fully
day, March 31, 2021 6:22 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: jes2 spool
I am trying to find software that will take print from the jes2 spool, compress
it and send it to a sever. Do anyone know of a product that will do this?
t On Behalf Of
PINION, RICHARD W.
Sent: Wednesday, March 31, 2021 8:33 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: [Originated Externally]Re: jes2 spool
[External Email. Exercise caution when clicking links or opening attachments.]
Have a look at JRB from McKinney Systems. We are using it to suck up
From: Shelia
To: IBM-MAIN
Date: Wednesday, 31 March 2021 7:22 AM CDT
Subject: jes2 spool
I am trying to find software that will take print from the jes2 spool, compress
it and send it to a sever. Do anyone know of a product that wi
From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of
Shelia Chalk [sch...@trustmark.com]
Sent: Wednesday, March 31, 2021 8:22 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: jes2 spool
I am trying to find software that will take print from the jes2 spool, compress
that will take print from the jes2 spool, compress
it and send it to a sever. Do anyone know of a product that will do this?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.ed
https://github.com/michaelknigge/srs This will spin off a file.
On Wed, Mar 31, 2021 at 7:22 AM Shelia Chalk wrote:
>
> I am trying to find software that will take print from the jes2 spool,
> compress it and send it to a sever. Do anyone know of a product that will d
ictly text type output or are you wanting to render AFP
forms etc?
Rex
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Shelia Chalk
Sent: Wednesday, March 31, 2021 7:23 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: [External] jes2 spool
I am trying to find software that
Ok thanks I will look into it.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
PINION, RICHARD W.
Sent: Wednesday, March 31, 2021 7:33 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: jes2 spool
Have a look at JRB from McKinney Systems. We are using it to suck up
Ok thanks I will look into it.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Michael Brennan
Sent: Wednesday, March 31, 2021 8:23 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: jes2 spool
JHS by Systemware:
https://nam10.safelinks.protection.outlook.com/?url
JHS by Systemware: https://www.systemware.com/?s=jhs
From: IBM Mainframe Discussion List on behalf of
Shelia Chalk
Sent: Wednesday, March 31, 2021 7:22 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: jes2 spool
[CAUTION: This Email is from outside the
On Behalf Of
Shelia Chalk
Sent: Wednesday, March 31, 2021 8:23 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: jes2 spool
[External Email. Exercise caution when clicking links or opening attachments.]
I am trying to find software that will take print from the jes2 spool, compress
it and send it to a
I am trying to find software that will take print from the jes2 spool, compress
it and send it to a sever. Do anyone know of a product that will do this?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
hanks,
>
> Rex
>
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf
> Of Roger Bolan
> Sent: Sunday, September 6, 2020 5:44 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: [External] Re: Simple JES2 spool offload question
>
> See Tuning wo
#x27;s all it'll offload, but if it doesn't
find any it'll offload everything (based on any other criteria I might have)?
Thanks,
Rex
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Roger Bolan
Sent: Sunday, September 6, 2020 5:44 PM
To: IBM-MAIN@LISTSER
Sep 4, 2020 at 11:25 AM Pommier, Rex
wrote:
> Hi List,
>
> I have a question that has puzzled me on and off for years regarding the
> work selection criteria for the JES2 spool offload facility. That is the
> use of the slash. I get the part about criteria left of the slash bein
Hi List,
I have a question that has puzzled me on and off for years regarding the work
selection criteria for the JES2 spool offload facility. That is the use of the
slash. I get the part about criteria left of the slash being required, i.e. if
you have JOBNAME=ABCDE and WS=(JOB/) only
Para: IBM-MAIN@LISTSERV.UA.EDU
Assunto: Stunted JES2 spool volume and other questions
I tried to add a few spool volumes (z/OS 2.3) without paying attention to the
TGSPACE value. My bad. Two were added, one was *stunted* and the last two were
ignored.
Now, I want to dynamically increase TGSPAC
See interspersed:
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Richards, Robert B.
Sent: Saturday, March 28, 2020 7:14 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Stunted JES2 spool volume and other questions
[CAUTION: This Email is from outside the Organization
I tried to add a few spool volumes (z/OS 2.3) without paying attention to the
TGSPACE value. My bad. Two were added, one was *stunted* and the last two were
ignored.
Now, I want to dynamically increase TGSPACE and SPOOLNUM and then add more
spool volumes.
Current TGSPACE=814,375 and 75% used
C
I have two mod-9s dedicated to JES2 spool. The first volume is just 43%
fill and the second volume is 99% full. I would like to expand my spool
space to use the full area on the first volume. (No other datasets are
on these volumes.)
It looks like I can do this simply by using:
$TSPOOL(JESSP1
m:Todd Burrell
Subject: Strange JES2 SPOOL Offload issue
I'm playing around with JES2 SPOOL OFFLOAD on our test system and I want to be
able to try and offload everything from the spool to test out timing. I have
changed both of my transmitters to have DISP=KEEP to make the offload
no-destru
I think you and Elardus nailed it
Carmen Vitullo
- Original Message -
From: "Dana Mitchell"
To: IBM-MAIN@LISTSERV.UA.EDU
Sent: Thursday, September 13, 2018 9:27:32 AM
Subject: Re: Strange JES2 SPOOL Offload issue
Specifying a minus sign (-) before a criterion c
Behalf
Of Dana Mitchell
Sent: Thursday, September 13, 2018 10:28 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Strange JES2 SPOOL Offload issue
Specifying a minus sign (-) before a criterion causes that criterion to be
removed from the list.
$TOFF1.ST,WS
9:21:09 AM
Subject: Re: Strange JES2 SPOOL Offload issue
I did a $SOFFLOAD2,TYPE=TRANSMIT and it started fine. Both OFF2.JT and OFF2.ST
show INACTIVE?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Carmen Vitullo
Sent: Thursday,
I'm playing around with JES2 SPOOL OFFLOAD on our test system and I want to be
>able to try and offload everything from the spool to test out timing. I have
>changed both of my transmitters to have DISP=KEEP to make the offload
>no-destructive.
>
>However, once I start
are sometimes puzzling and it is years ago I was responsible
for major offload and reload of JES2 spool data.
Good luck!
Groete / Greetings
Elardus Engelbrecht
--
For IBM-MAIN subscribe / signoff / archive access instruc
Subject: Re: Strange JES2 SPOOL Offload issue
offload2 not started?
my display shows
OFFLOAD1 DRAINED
OFF1.JT STARTABLE
OFF1.ST STARTABLE
OFF1.JR STARTABLE
OFF1.SR STARTABLE
OFFLOAD1 DRAINED
OFF1.JT STARTABLE
OFF1.ST STARTABLE
OFF1.JR STARTABLE
OFF1.SR STARTABLE
z
- Original Message -
From: "Todd Burrell"
To: IBM-MAIN@LISTSERV.UA.EDU
Sent: Thursday, September 13, 2018 9:05:40 AM
Subject: Strange JES2 SPOOL Offload issue
I'm playing around with JES2 SPOOL OFFLOAD on our test system and I want to be
able to try and offload everything
Exit?
Security package?
Those come to mind.
Rob Schramm
On Thu, Sep 13, 2018, 10:06 AM Todd Burrell wrote:
> I'm playing around with JES2 SPOOL OFFLOAD on our test system and I want
> to be able to try and offload everything from the spool to test out
> timing. I have chan
I'm playing around with JES2 SPOOL OFFLOAD on our test system and I want to be
able to try and offload everything from the spool to test out timing. I have
changed both of my transmitters to have DISP=KEEP to make the offload
no-destructive.
However, once I start the offload it doe
Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of retired mainframer
Sent: Tuesday, August 21, 2018 2:26 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: (External):Re: JES2 Spool Data Set Browse (SDSB) sample
It sure would be nice to know which suggestion was so awesome
> -Origi
It sure would be nice to know which suggestion was so awesome
> -Original Message-
> From: IBM Mainframe Discussion List On
> Behalf Of Chris Cantrell
> Sent: Tuesday, August 21, 2018 12:29 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: JES2 Spool Data Set Br
This works awesome!
It is what I ended up using.
Thanks for everyone's comments.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
I have written some REXX to inventory all running jobs and STCs on a given LPAR
and search for certain messages in the JESMSGLG DD for each job/STC. This
Redbook provided helpful examples: Implementing REXX Support in SDSF.
--
please excuse the brevity.
> Original message From: Paul Gilmartin <
> 000433f07816-dmarc-requ...@listserv.ua.edu> Date: 8/19/18 4:21 PM
> (GMT-05:00) To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: JES2 Spool Data Set
> Browse (SDSB) sample
> On Sun, 19 A
(GMT-05:00) To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: JES2 Spool Data Set
Browse (SDSB) sample
On Sun, 19 Aug 2018 12:51:54 -0700, Ed Jaffe wrote:
>
>It's pretty trivial if you already know how to do allocation via SVC99.
>Looking at (E)JES code, I see we use the following keys:
On Sun, 19 Aug 2018 12:51:54 -0700, Ed Jaffe wrote:
>
>It's pretty trivial if you already know how to do allocation via SVC99.
>Looking at (E)JES code, I see we use the following keys:
>
>DALRTDDN (let the system choose DD name)
>DALDSNAM (owner.jobname.jobid.dsnum.dsname)
>DALSTATS (SHR)
>DALSSREQ
On 8/19/2018 12:51 PM, Ed Jaffe wrote:
DALSSREQ (technically only needed for secondary JES)
Actually, I think it's probably required for spool browse and optional
when submitting to internal reader.
--
Phoenix Software International
Edward E. Jaffe
831 Parkview Drive North
El Segundo, CA 902
On 8/16/2018 7:00 AM, Chris Cantrell wrote:
We are on release 2.2. I am wanting to read the JCL in the first step of the
job and perform very specific (which may change) verifications to the JCL and
abend the job if the 'standards' are not met.
It's pretty trivial if you already know how to d
On Sun, 19 Aug 2018 13:56:41 -0400, scott Ford wrote:
>You can in Rexx and SDSF , we do it via our DevOPS process we use from
>bitbucket where our source and CI processes are stored.
>It takes some work..but works well,
>
There are some examples at or about:
https://www.ibm.com/support/knowle
You can in Rexx and SDSF , we do it via our DevOPS process we use from
bitbucket where our source and CI processes are stored.
It takes some work..but works well,
Scott
On Thu, Aug 16, 2018 at 3:13 PM Paul Gilmartin <
000433f07816-dmarc-requ...@listserv.ua.edu> wrote:
> On Thu, 16 Aug 2018 1
On Thu, 16 Aug 2018 11:26:14 -0500, Kirk Wolf wrote:
>
>You don't need to use the SSI to read a spool data set, although you do
>need a way to get the JES SSID and jobid (like from the current JSAB).
>
>It is not too complicated: you just allocate it using SVC99 (and some
>special purpose keys) and
: Re: JES2
Spool Data Set Browse (SDSB) sample
Didn't the OP want to change the dataset?
CharlesSent from a mobile; please excuse the brevity.
Original message From: Kirk Wolf
Date: 8/16/18 11:26 AM (GMT-06:00) To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re:
JES2 Spool Dat
Didn't the OP want to change the dataset?
CharlesSent from a mobile; please excuse the brevity.
Original message From: Kirk Wolf
Date: 8/16/18 11:26 AM (GMT-06:00) To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re:
JES2 Spool Data Set Browse (SDSB) sample
On Thu, Aug 16, 2018
On Thu, Aug 16, 2018 at 9:20 AM, Charles Mills wrote:
> A short answer is check out the SSI (Subsystem Interface) manual. Not for
> the feint-hearted.
>
You don't need to use the SSI to read a spool data set, although you do
need a way to get the JES SSID and jobid (like from the current JSAB).
PRINT CLOSE
//*
This prints the JESMSGLG put you could change that to JESJCL.
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Charles Mills
Sent: Thurs
nTek Solution Partners
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Chris Cantrell
Sent: Thursday, August 16, 2018 9:43 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: [EXTERNAL] Re: JES2 Spool Data Set Browse (SDSB) sample
I want to rea
I want to read the JCL for the job as it is running. I want to execute a
program as the first step that reads the JCL of the actual job that it is being
executed in.
--
For IBM-MAIN subscribe / signoff / archive access instructi
On Thu, 16 Aug 2018 09:00:15 -0500, Chris Cantrell wrote:
>We are on release 2.2. I am wanting to read the JCL in the first step of the
>job and perform very specific (which may change) verifications to the JCL and
>abend the job if the 'standards' are not met.
>
Is SDSF an option?
-- gil
---
@LISTSERV.UA.EDU
Subject: JES2 Spool Data Set Browse (SDSB) sample
Does anyone have a somple program which reads the currently running jobs JCL
using the Spool Data Set Browse (SDSB) function? I would be extremely greatful
in anyone could post a sample! Thanks
We are on release 2.2. I am wanting to read the JCL in the first step of the
job and perform very specific (which may change) verifications to the JCL and
abend the job if the 'standards' are not met.
--
For IBM-MAIN subscribe /
t; To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: JES2 Spool Data Set Browse (SDSB) sample
>
> Does anyone have a somple program which reads the currently running jobs JCL
> using the Spool Data Set Browse (SDSB) function? I would be extremely
> greatful in anyo
Does anyone have a somple program which reads the currently running jobs JCL
using the Spool Data Set Browse (SDSB) function? I would be extremely greatful
in anyone could post a sample! Thanks!
--
For IBM-MAIN subscribe / signo
m
1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H
p 616.653.8429
f 616.653.2717
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Mike Schwab
Sent: Wednesday, March 14, 2018 5:39 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: TDMF and
swap. Follow religiously or you get unexpected hangs.
On Wed, Mar 14, 2018 at 3:34 PM, Reno Puntillo wrote:
> I have used TDMF many times in the past to move JES2 Spool and Ckpt volumes.
> For Spool and ckpt volumes try to move them one at a time as "special"
> volumes. It us
I have used TDMF many times in the past to move JES2 Spool and Ckpt volumes.
For Spool and ckpt volumes try to move them one at a time as "special"
volumes. It used to be a planning consideration in the docs but in recent
releases it doesn't seem to be an issue. I try not to t
zette Koehler"
To: IBM-MAIN@LISTSERV.UA.EDU
Sent: Wednesday, March 14, 2018 12:46:38 PM
Subject: TDMF and JES2 Spool volumes
Any one used TDMF to move active/live/in-use JES2 Spool volumes?
If yes, any considerations?
Lizette Koehler
statistics: A precise and logical method for stat
B2H
p 616.653.8429
f 616.653.2717
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Lizette Koehler
Sent: Wednesday, March 14, 2018 1:47 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: TDMF and JES2 Spool volumes
**CAUTION EXTERNAL EMAIL**
**DO NOT
Any one used TDMF to move active/live/in-use JES2 Spool volumes?
If yes, any considerations?
Lizette Koehler
statistics: A precise and logical method for stating a half-truth inaccurately
--
For IBM-MAIN subscribe / signoff
W dniu 2017-03-10 o 16:48, Lizette Koehler pisze:
Just guessing here
I think for one HASPACE there is a maximum of 1,048,575 tracks
So you would be able to have so many volumes of HASPACE upto 1TB of storage.
Maybe this supports EAV Volumes for HASPACE?
Lizette
No Lizette, the explanation
to:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Tom Marchant
> Sent: Friday, March 10, 2017 8:25 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: JES2 Spool Volume size
>
> On Thu, 9 Mar 2017 18:17:04 +0100, R.S. wrote:
>
> >Current limit is 1TB.
>
> Is it? Acc
On Thu, 9 Mar 2017 18:17:04 +0100, R.S. wrote:
>Current limit is 1TB.
Is it? According to
https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.2.0/com.ibm.zos.v2r2.hasa300/has2v5_Space_allocation.htm
"JES2 supports using a data set more than 64K tracks in size up to 1,048,575
tracks."
That
: Re: JES2 Spool Volume size
Bob, do you happen to run CA-Roscoe? If so, they weren't handing
CYL_MANAGED=ALLOWED correctly, and sysout viewing from Roscoe would fail for
any sysout created after the CYL_MANAGED change.
Separately, and unreleted, CA-ROSCOE wasn't handing the effects
Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Richards, Robert B.
Sent: Thursday, March 09, 2017 9:37 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: JES2 Spool Volume size
Anyone using the larger volume MOD sizes for spool volumes? Any issues?
Largest SYS1.HASPACE ? :)
Activating
429
f 616.653.2717
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Richards, Robert B.
Sent: Thursday, March 09, 2017 9:37 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: JES2 Spool Volume size
Anyone using the larger volume MOD sizes for
Thanks Mark!
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Mark Zelden
Sent: Thursday, March 09, 2017 12:54 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: JES2 Spool Volume size
On Thu, 9 Mar 2017 18:17:04 +0100, R.S. wrote:
&g
On Thu, 9 Mar 2017 18:17:04 +0100, R.S. wrote:
>W dniu 2017-03-09 o 15:37, Richards, Robert B. pisze:
>
>> Anyone using the larger volume MOD sizes for spool volumes? Any issues?
>>
>>
W dniu 2017-03-09 o 15:37, Richards, Robert B. pisze:
Anyone using the larger volume MOD sizes for spool volumes? Any issues?
Largest SYS1.HASPACE ? :)
Activating LEVEL=z22 this weekend. Anyone seen issues after setting the new
mode?
Current limit is 1TB.
That require LARGEDS.
Personally
: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: JES2 Spool Volume size
On Mar 9, 2017, at 8:37 AM, Richards, Robert B. wrote:
>
> Anyone using the larger volume MOD sizes for spool volumes? Any issues?
I’m using mod-54, with no issues.
>
> Largest SYS1.HASPACE ? :)
SPACE=(CYL,(65519)),D
1 - 100 of 154 matches
Mail list logo
