You can just go to HMC and do a PCHID reassign from bad one to a good
one in same or in another Escon Card.
Carlos Bodra
IBM Certified Specialist System z
Sao Paulo - Brazil
Em 21/07/2011 16:32, Sherry Everhart escreveu:
Hello Everyone,
I am interested in knowing how to configure
Hi List!
In z10 HMC under Automatic Activation Profiles, I can found following
MODES under Processor tag for each LPAR defined:
ESA/390 - OK! It´s for traditional CP´s to run z/vm, z/vse and z/OS
ESA/390 TPF - OK! I never saw a TPF system running... (forgot it)
Coupling Facility: OK! Name
Hello.
I need to prepare a migration from an old OS/390 2.5 to z/OS 1.4 over a
z890 machine.
Can I use z/VM 5.4 as host to a z/OS 1.4 guest? OS/390 2.5 will continue
to run over a 9672
until all has been migrated to z/OS.
z/OS 1.4 could run in compatibility mode or not, but this is another
Hi s390x Gurus
I´m new to Linux on z and we are conducting a POC test of Linux Red Hat
with Oracle running under z/VM 5.4 RSU 1003
and a z/10 BC model A00 (IFL Only).
If linux virtual machine is defined with 64G in directory we got an
abend during startup (see below). Doing some tests I
19:24, Davis, Larry (National VM/VSE Capability) escreveu:
Are you Running VM on this or zLinux only on an LPAR?
Larry Davis**
*From:*The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU]
*On Behalf Of *Carlos Bodra - Pessoal
*Sent:* Wednesday, April 20, 2011 6:19 PM
*To:* IBMVM
Hardware Memory configuration for Main Storage and XSTORE
for VM
Larry Davis**
*From:*The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU]
*On Behalf Of *Carlos Bodra - Pessoal
*Sent:* Wednesday, April 20, 2011 6:39 PM
*To:* IBMVM@LISTSERV.UARK.EDU
*Subject:* Re: z/VM RedHat Virtual
Sherry
Order PTF UV97540 and you will got lastest RSU for z/VM 5.4. (1008)
I did it eletronically and applied it a couple of days ago and a lot of
PSP reported ptfs was installed.
You can use Auomated Installation and Service (I never tried!) or
Service Guide (I used this, since I working with
Hello
I was checking how z/vm 5.4 supports 3592-E05 (TS1120) installed into a
library 3577-L5U.
I have a 3592-C06 ficon attachment to connect z10 to tape drive. I can
load, write, read and
unload cartridge using 3577-L5U operator panel. I was unable to find out
how to tell to z/vm
to pick up
If you have access to shopzseries our ibmlink(servlink) check PSP for
2098Device.
If you z/vm is at 1003 level you will need to apply about 13 ptfs that
isn´t included in RSU.
I did this just a week ago upgrading from 0903 level running in z890 to
1003 to run in z10-BC.
Now working in
How can I readout these Machine Check occurring in a MP3000 running
zVm 4.40
07:13:06 HCPMCI9101I MACHINE CHECK ON CPU . MCIC = 04000F3D 400B
07:13:06 System operation continues.
07:53:45 HCPMCI9101I MACHINE CHECK ON CPU . MCIC = 04000F3D 400B
07:53:45 System operation
Hi listners.
I was checking erep output to try to discover more about MCIC (Machine
Check Interruption Code) and found following register,
but I checked 02 Erep manuals, (User´s Guide Manual and Reference
Manual), but can´t found any description how to readout these
little dump.
We are
Hi
We are in process to configure some area of our 2105-800 to be used by
open systems.
We start process and when we try to building host access (option modify
host), we got in ESS Specialist console following
message:
ERROR 1199 Information server problem. An unknown server error occurred.
Hi listners,
Just to tell that we get out 2105-F20 connected to z10 BC via FCP this
weekend via switch 2005-B16.
Seems that we have a problem with 2105-800 that we was trying to
connected earlier. We will check ESS800
to find what is wrong.
Thanks for all that send tips and hints.
--
Robert,
Yes, 2109 and 2005 were zonned to allow z10 access. Same zone was used
to test access to intel, so
zonned is working ok.
I can´t bring up a linux image, since I´m not able to define storage to
be used by this image. My problem is
before try to bring up zvm 5.4 or linux under it.
Hi
I´m trying to connect a z10 to a shark using FCP protocol, but without
success.
We did some tests that are describe below:
1 - Connect z10 to shark 800 sw2 adapter with both sides defined as
Ficon. Works fine
2 - Connect z10 to shark 800 sw2 adapter with both sides defined as FCP.
Bodra - Pessoal cbo...@terra.com.br
Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU
09/27/2010 11:12 AM
Please respond to
The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: z10 shark 800 and FCP
Robert,
Yes, 2109 and 2005
South Road
Poughkeepsie, NY 12601
(845) 435-8666, T/L 295-8666
rayhi...@us.ibm.com
*Carlos Bodra - Pessoal cbo...@terra.com.br*
Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU
09/27/2010 10:53 AM
Please respond to
The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU
Hi Alan,
Yes, I changed IOCDS and did a power on reset. Since this machine isn´t
in production, I can do POR as I need.
Carlos Bodra
IBM zSeries Certified Specialist
Sao Paulo - Brazil
Em 27/09/2010 14:03, Alan Altmark escreveu:
On Monday, 09/27/2010 at 12:55 EDT, Carlos Bodra
Hi Scott
We have a z10 BC (2098-K01) running native with IBM 2105 Model F20
(3390-3 and 3390-9 volumes) and IBM 2105 Model 800 (3390-3 and 3390-9
volumes) without problems.
They are connected to z10 via 2 Ficon (primary path) and 04 Escon
(backup propose only - even I never used it, but
Warning: This email was cross posted to IBM-MAIN, IBMVM and VSE-L Lists.
As z196 has a code name of *Gryphon* before announcement, other zSeries
has similar names, as *T-Rex* (z990??)
*Pterodactylus*/ (z890???)
Anyone has all family names?
z900 -
z800 -
z990 - /*T-Rex*/
z890 -
Good luck and thanks for your support over all these years!
Carlos Bodra
IBM zSeries Certified Specialist
Sao Paulo - Brazil
Em 02/09/2010 11:48, Alan Altmark escreveu:
Effective September 16th, after nearly 28 years in VM Development, I am
moving to a new role as a member of IBM
Hi Sergio,
Unless you have 3592 drive installed into a 3494 or 3584 you can´t use
it as a library if installed in a
3577-L5U. This unit is recognized as library only for open systems, not
for mainframe.
Drive units 3592 installed into a 3577 L5U are recognized by mainframe
systems as
Sergio,
Hello. Good to listen from you.
If your z/vm is 5.4 or 6.1 VM Perf Tool Kit is installed in basic
restore (initial ddr) as a feature, but not enable.
Its a priced feature, so implies in licensing it from IBM. It´s a very
good monitor, a mix of old RTM/ESA and MONITOR.
If you run
Hello Listners
I have following situation as response of Q DASD DETAILS
Q DASD DETAILS 300
CUTYPE = 3990-E9 DEVTYPE=3390-0A
Q DASD DETAILS A00
CUTYPE = 3990-CC DEVTYPE=3390-0C
Q DASD DETAILS B00
CUTYPE = 3990-E2 DEVTYPE=3390-0A
Address 300 is a volume in IBM 2105-800
Address A00 is a volume
Edward,
I use this command for years
with diferent vm/esa and z/vm and no problems.
ENTER INPUT
COMMAND:
CPVOL FMT MODE(ESA)
UNIT(0250) VOLID(VMPAK1) NOVFY
RANGE(0,544)
CPVOL FMT
MODE(ESA) UNIT(0250) VOLID(VMPAK1) NOVFY
RANGE(0,544)
ICK03020I CPVOL IS
OPERATING IN VM/ESA
Hello
I need to learn how to reduce messages from TCP/IP
Server machine that are showed in zVM OPERATOR user (main console).
Since TCP/IP server machine runs disconnected, I
defined in directory a secondary console, but a lot of messages rolls due tcpip
traffic. There is a
IBM MUST give an option. There are some products from IBM that uses VSAM/VM
and how we should handle this? Netview Access is one of them. Change it
means to re-think all our mainframe access.
Carlos
-Mensagem original-
De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Em nome
If you check Bustech Inc site, you can install a Netshuttle or a Man and
never more change from OSA to Internal nics or reconfigure OSA when move
again. They are Escon control units and all you will need is to unplug from
escon port in old machine and plug it in new one. Ahhh and of course build a
Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
On
Behalf Of Bodra - Pessoal
Sent: Thursday, May 25, 2006 1:00 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: RES: z/VM 5.2 on z800 with 8G of memory
If you check Bustech Inc site, you can install a Netshuttle or a Man
Hi MP3000 Gurus,
I need some help how to migrate from an OSA-2 using
Token-Ring adapter from an IBM 9672-RB5 to a MP3000 H50 with TKR card.
Today I use XCA VTAM book to see OSA
TKR. I was checking MP3000 manual and found no useful information about how to
configure EMIO and MPTS
31 matches
Mail list logo