Hello Fellow Listers,
I have the opportunity to work on upgrading a VM/ESA 2.2 system to z/VM 5.4
on a new z10. I am wondering if I can run a copy of the 2.2 system under 5.4
on a z10 during the build phase ?
Cheers
Graeme
G'day Listers,
during a recent z/VM upgrade (in which VTAM stayed at V4R2) it was found
that source for our members contained in VTAMUSER LOADLIB was not carried
over from a previous upgrade. While we have been able to use the previous
version of the loadlib to keep VTAM going we want to
you need to run DEFINE CPOWNED command. See information online HELP DEFINE
CPOWNED
Graeme
- Original Message -
From: Frank M. Ramaekers
To: IBMVM@LISTSERV.UARK.EDU
Sent: Friday, March 05, 2010 6:29 AM
Subject: Adding an CPOWNED volume
I know I can FORMAT/LABEL/ALLOCATE
CONFIG and
IPL.
Graeme
- Original Message -
From: Graeme Moss
To: IBMVM@LISTSERV.UARK.EDU
Sent: Friday, March 05, 2010 7:59 AM
Subject: Re: Adding an CPOWNED volume
you need to run DEFINE CPOWNED command. See information online HELP DEFINE
CPOWNED
Graeme
Subject: Re: Query CPOWNED
On Sun, Feb 7, 2010 at 9:03 PM, Graeme Moss ib...@mossaustralia.com wrote:
For z/VM 5.4, in manual CP Commands and Utilities, and in online help, the
details of QUERY CPOWNED list 5 types of status
Online and attached
Reserved
Online
Online
For z/VM 5.4, in manual CP Commands and Utilities, and in online help, the
details of QUERY CPOWNED list 5 types of status
Online and attached
Reserved
Online
Online and not attached
Offine
My question is What does the status of 'Online' as oppossed to 'Online and
attached' and 'Online and not
I used SFS on z/VM 5.3 to hold the install files.
Cheers
Graeme
- Original Message -
From: Jefferson Davis jeffersondavi...@yahoo.com
To: IBMVM@LISTSERV.UARK.EDU
Sent: Tuesday, November 24, 2009 6:53 AM
Subject: z/VM 540 DVD install
I am doing an install of z/VM 5.4.0 second level
Hello Listers,
I am working on a new z/VM 5.4 rsu 0902 system. To prove the hardware I have
set up a second TCPIP with a new OSA owned by TCPIP2. I am getting this
message but cannot track down any information about it.
DTCOSD223E OSD device d...@0900: Return code E080 from STRTLAN for IPv4
: Re: z/VM 6.1 and Hercules on Z9
On Wed, 29 Jul 2009 07:03:59 +1000, Graeme Moss ib...@mossaustralia.com
wrote:
The company I work for is very tight with money (eg they don't pay me wh
at I
would like to receive) and the section I work for (Software Factory) onl
y
gets hand-me-down
The company I work for is very tight with money (eg they don't pay me what I
would like to receive) and the section I work for (Software Factory) only
gets hand-me-down mainframes. I can see the situation arising where our
clients who are on a z10 will want z/VM 6.1 but the Software Factory
it, and 3) they do not have any
sense of humor.
Honestly, I have been there and done that.
Ed Martin
Aultman Health Foundation
330-363-5050
ext 35050
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Graeme Moss
Sent: Tuesday, July 28
I am after the SSL package for Charlotte. The link
http://cmsuvmb.cmsu.edu/charlott/ no longer works and I could not find it on
University of Central Missouri website.
tia
Graeme
',
'| ja: juxtapose',
'| specs w1 1 w2 nw',
'| sort unique',
'| stem config.',
'?',
'ca:| split | ja:'
There was also a suggestion to use FANINTWO which doesn't appear in PIPES
HELP but does in the authors help.
Graeme
- Original Message -
From: Graeme Moss ib...@mossaustralia.com
I am writing a piupeline that reads records in the format attribute list
of users where the list of users may be one or many and write out a record
for each user consisting of attribute user
The code I wrote shown below terminates while some partially processed
records are in the pipeline
Dave,
I applied RSU0802 and the SSLSERVE SPE yesterday and had no problems. Like
you my system is installed as far as possible in SFS. I checked the $CONS
files and did not find DOSINST being regenerated.
Cheers
Graeme
- Original Message -
From: Dave Jones d...@vsoft-software.com
I am trying to arrange for a presentation of Velocity Software's z/VM and
Linux under z/VM Performance Class
http://www.velocitysoftware.com/seminar/workshop.html to be presented in
Australia. I need another six attendees to make it viable.
If you are interested please email me at [EMAIL
Here is my experience with my testing of electronic delivery of z/VM. It may
be of use to others in similar situations or fellow listers may be able to
suggest improvements.
For electronic delivery IBM recommends the installer download the zip files
to their workstation, unzip and then as one
) = USER= then
do
sender = subword(command,2,1)
command = subword(command,3)
end
say date() time() 'Issuing' command 'for' sender
'cp set secuser' sender
command
'cp set secuser off'
return
Cheers
Graeme Moss
G'day Listers,
When trying to ipl a CA HiDRO stand alone restore cart at a new data centre
(for VM) the ipl of the cart failed. The person in charge said this had
happened before when trying to ipl a Linux system install cart as well.
The other lpars are running MVS.
From the Problem
RE: UNIVAC: mainframe related.See the history or CSIR (aka CSIRAC) the oldest
surviving electronic computer.
http://www.csirac.info/
also of interest is article about Dr Trevor Pearcey (who lectured me on
Computer History)
http://www.pearcey.org.au/index.php/Dr_Trevor_Pearcey
-
When I issue VMLINK MAINT 190 120 Z (NON
the existing link at 190 and access at S are lost.
This happens for any linked and accessed mdisk not just
MAINT.
If I do LINK MAINT 190 120 RR followed by ACCESS 120 Z
instead of VMLINK the S disk is retained.
Am I missing a VMLINK parameter to cause
Hi Clifford,
I follow instructions Part 4. Service procedure in GC24-6099-00 z/VM V5.1
Guide for Automated Installation and Service available from
http://www.vm.ibm.com/pubs/index.html and use SERVICE and PUT2PROD execs.
Cheers
Graeme
- Original Message -
From: clifford jackson
Listers,
I am trying to watch replay of live virtual class for
Virtualization Basics http://www.vm.ibm.com/education/lvc/
but get an error Restricted Event - You cannot attend the
event because it is restricted to invited guests only.
I have been able to watch the 5.3 Intro and 5.3
required by PUT2PROD. This
allows multiple service sessions to be followed by a single
PUT2PROD.
- Original Message -
From: Graeme Moss [EMAIL PROTECTED]
To: IBMVM@LISTSERV.UARK.EDU
Sent: Tuesday, November 27, 2007 10:13 AM
Subject: Service Methodology Query
Hi,
I have downloaded RSU
Hi,
I have downloaded RSU 0702 for z/VM 5.2 and also the PTFs
mentioned in upgrade ZVM520 subset 0702RSU document.
These were applied serially using the sequence of commands
SERVICE ALL
PUT2PROD
SERVICE ALL
PUT2PROD
My query of you is
1)Could the first PUT2PROD be left
the list have any suggestions on what we can do ?
Thanks in advance
Graeme Moss
Greetings Listers,
PIPEDDR can use TERSE or PACK stages for compression or use
no compression.. It only fails if TERSE option is specified
and the stage is not available. It is written so it does not
rely on TERSE
I have used PIPEDDR with PACK option to transfer complete
3390s from one data
Hi Listers,
I have been reading the zVM 5.3 GI manual and FAQ about how
5.3 can be ordered, delivered and installed.
page 20 of the GI states that DVD can be moved to a mdisk
and then installed from the mdisk. This provides more
options for customer environments and can facilitate
electronic
Hi Dennis,
I have a feeling that when I follow my cheatsheet below that
during rebuilds when applying maintenance the rebuilds fail
due to storage already in use. Haven't tested but
maintenance goes on fine on systems without the increased
HELPSEG
with CA VM:Manager suite.
Thanks
Graeme Moss
it to IBM ?
Graeme
- Original Message -
From: Graeme Moss
To: IBMVM@LISTSERV.UARK.EDU
Sent: Friday, September 15, 2006 5:16 PM
Subject: BFS Timestamp
I have a file in SFS which is the subject of OPENVM PUT with
options REP and OLDD.
When I look at the directory using BFSLIST the time stamp
, Graeme Moss [EMAIL PROTECTED] wrote:
I have read HELP PIPE BFSSTATE and there is no mention of
the displayed time being altered.
The real help comes with PIPE HELP instead:
4. The time of last modification is reported in a format
that is suitable
for sorting. The time is UTC
I have a file in SFS which is the subject of OPENVM PUT with options REP
and OLDD.
When I look at the directory using BFSLIST the time stamp is 4 hours ahea
d
of the timestamp of the file in SFS.
Q TIMEZONE gives EDT West 04.00.00 Active.
My question is Is the BFS timestamp in UTC?
Stand-Alone ICKDSF seems to only be orderable via UK15426
and UK15427 as documented in II01692.
In the dim past I seem to remember generating standalone
programs by punching a three-card loader then punching the
module before closing the punch. The punch file was then
read into a cms file and
34 matches
Mail list logo
