I'm using DFSMS to access our virtual ATL(a TS7700). I'm trying to dump
minidisks to tape, some of which are larger than the virtual tapes.
DFSMS seems to require detaching the tape drive from the user which is
doing the dump to mount a new tape. But the user has it. Is there
something I'm
why not issue a sync?
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu]
On
Behalf Of Alan Altmark
Sent: Wednesday, January 14, 2009 2:14 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Flashcopy
On Wednesday, 01/14/2009 at 02:51 EST, Dean, David
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu]
On
Behalf Of Alan Altmark
Sent: Wednesday, January 14, 2009 3:38 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Flashcopy
On Wednesday, 01/14/2009 at 04:07 EST, Dean, David (I/S)
Is it safe to detach a drained page volume from the system if there are
no pages on it? For instance, removing 520PA2 below?
q alloc page
EXTENT EXTENT TOTAL PAGES HIGH%
VOLID RDEV STARTEND PAGES IN USE PAGE USED
-- -- --
We've had two guests forced off the system this morning. What can I do
to track down the cause? Is this going to happen to more guests?
09:21:01 GRAF L0004 DISCONNECT S99KDT02 USERS = 34FORCED BY SYSTEM
09:36:01 USER DSC LOGOFF AS S99KDT02 USERS = 33FORCED BY SYSTEM
09:55:00 GRAF
Just installed 5.2. Downloaded and ran service all rptf, etc.
Ran put2prod.
Now have the follwing:
Ready; T=0.01/0.02 14:48:23
q cmslevel
CMS Level 22, Service Level 701
Ready; T=0.01/0.01 14:48:27
q cplevel
z/VM Version 5 Release 2.0, service level (64-bit)
Generated at 10/23/05
, Reinstall.
-Original Message-
From: The IBM z/VM Operating System
[mailto:[EMAIL PROTECTED] On Behalf Of Little, Chris
Sent: Thursday, May 17, 2007 12:01
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] different levels of CP and CMS after
put2prod for z/VM
5.2
Just installed 5.2
Nope:
CPLOAD MODULE Z1 V 65535191 3022 10/23/05
11:53:04
Searched for CPLOAD in $VMFP2P $MSGLOG but it doesn't even show, but
perhaps that isn't where I would find it?
-Original Message-
From: The IBM z/VM Operating System
[mailto:[EMAIL PROTECTED] On Behalf
cooperation.
-Original Message-
From: The IBM z/VM Operating System
[mailto:[EMAIL PROTECTED] On Behalf Of Little, Chris
Sent: Thursday, May 17, 2007 1:07 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: [IBMVM] different levels of CP and CMS after
put2prod for z/VM
5.2
Nope:
CPLOAD
-Original Message-
From: The IBM z/VM Operating System
FILELIST * * * ( TODAY can make it easier to find files
created/updated today.
Mike Walter
Hewitt Associates
Filing for future use.
This extends a question I had earlier about DDRing spool and page dasd
and conflicts with device names at ipl (ie the DDRed spool and page
volumes share the same volser as production).
Will using the DEVICE ONLINE/DEVICE OFFLINE statement in SYSTEM
CONFIG prevent that from occuring? Or are
ONLINE/OFFLINE in SYSTEM CONFIG is OK. Only the
resident is online at that time.
2007/3/7, Little, Chris [EMAIL PROTECTED]:
This extends a question I had earlier about
Hello all,
I'm installing RMS and have come upon a problem. I'm guessing I fumble
fingered and deleted this earlier, but I've come to the step COPYFILE
RMSPROF EXEC T PROFILE = V (OLDDATE in the program directory (step 10)
and RMSPROF EXEC is nowhere to be found. So I have a question:
How do I
01, 2007 11:42 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Installing DFSMS/VM RMSONLY
On 3/1/07, Little, Chris [EMAIL PROTECTED] wrote:
Hello all,
I'm installing RMS and have come upon a problem. I'm
see previous. I have it now.
It was installed with RMSONLY as the component.
I would still be curious to know how to pull a single file in the future
if i need.
-Original Message-
From: The IBM z/VM Operating System
[mailto:[EMAIL PROTECTED] On Behalf Of Les Geer (607-429-3580)
It's not on my 1C2, but it is on 1B1.
-Original Message-
From: The IBM z/VM Operating System
[mailto:[EMAIL PROTECTED] On Behalf Of Les Geer (607-429-3580)
Sent: Thursday, March 01, 2007 11:49 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Installing DFSMS/VM RMSONLY
Hello all,
VMSESPARTCAT
SMPACSL ACS
SMPACSS ACS
SMPACS2 ACS
SMPREXX EXEC
FSMPROF EXEC
DGTVCNTL SAMPDATA
DGTVAUTH SAMPDATA
RMCONFIG SAMPCNFG
SMPCNFGR CONFIG
SMPCNFG2 CONFIG
SMPCNFGS CONFIG
SMPCNFGL CONFIG
-Original Message-
From: The IBM z/VM Operating System
[mailto:[EMAIL PROTECTED]
Is it possible for RMS to use RMM running on z/OS as it's tape
management system?
If not, how does one keep the libraries separate?
If so, how does one define the interaction for use by RMS?
+--+
| Chris Little OKDHS Platform Services |
this is much more complex than I thought. As it always seems
to be.
Thanks.
-Original Message-
From: The IBM z/VM Operating System on behalf of Little, Chris
Sent: Mon 2/12/2007 5:16 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] Renaming spool and page
We're working on disaster recovery
Sorry to suggest since given most shops production schedules, but I
would consider a reIPL of your production LPAR. Just to be sure.
If it was me, I would make a FULL spool backup first.
As a matter of fact, I think I would do that right now, even
if I couldn't IPL. Something is
We're working on disaster recovery here...and just about created one.
Created a recovery of our primary z/VM lpar and IPLed it in another,
but with a potentially grand mistake. The production spool and page
volumes are at a lower address than the DR spool and page volumes. And
it did IPL with
: Re: DDR dump all
That 'assign lost' sounds like another LPAR took over your tape drive. Did the
operators vary it on to a z/OS system?
/Tom Kern
--- Little, Chris [EMAIL PROTECTED] wrote:
Nope. Tried a different tape and a different drive. No go
I also got the following:
HCPDPM1280E
The King is dead! Long live the King!
-Original Message-
From: Alan Altmark [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 22, 2006 4:24 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Alert: Upcoming end-of-service for z/VM 4.4
Back in April there was discussion about the
and getting it online for the first time in z/vm 5.1
When following the procedure to Test the DIRMAINT Server Machine in the
Directory Maintenance Facility Tailloring and Adminstration Guide, I'm
getting the following error after DVHBEGIN. I'm not looking for an answer
to it -- just where to
24 matches
Mail list logo