Hi Rob,We don't run our CSE plex with shared sysres volumes, so we haven't needed to format the xlink area on them. Instead, we chose to add SYSAFFIN statements to all the VM system IDs so that they get linked to the correct minis on the correct volumes. We went this route so that we would be able
Title: Initially setting up CSE
Assuming you have VM running, try attaching the pack to MAINT running
XLINK FORMAT against it. If you have a guest VM you can IPL at will then do
this from the guest.
If the pack is addr 0789 and volid PACKA:
CP DETACH 789 SYSTEM
CP ATTACH 789 *
xlink
On 9/18/06, Nix, Robert P. <[EMAIL PROTECTED]> wrote:
I tried the XLINK FORMAT command from MAINT for 123 520RES, and got the
response "Operand missing or invalid." According to the help file, the
device address and label are the only two parameters. Any hints there?
Make sure you actually hav
nt: Monday, September 18, 2006 1:55 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: [IBMVM] Initially setting up CSE
Removing the xlink_include statements got the system up with the rest of
the CSE entries intact.
I tried the XLINK FORMAT command from MAINT for 123 520RES, and got the
response "Ope
On 9/18/06, Nix, Robert P. <[EMAIL PROTECTED]> wrote:
My impression was that the CSE area was within Cyl 0 on the volume. Is
this not correct?
As long as number of defined systems times number of cylinder does not
get too big, it fits in cylinder 0. And you could not for volumes in
the cpown l
e are different."
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Kris Buelens
Sent: Monday, September 18, 2006 3:43 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Initially setting up CSE
Remove the volumes from XLINK_INCLUDE in SYSTEM CO
: The IBM z/VM Operating System
2006-09-18 22:33
Please respond to
The IBM z/VM Operating System
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Initially setting up CSE
I finally got all the pieces, and started working on a zVM v5.2 system
with CSE. My problem is that, when I try to turn on CSE in
perating System
2006-09-18 22:33
Please respond to
The IBM z/VM Operating System
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Initially setting up CSE
I finally got all the pieces, and started working on a zVM v5.2 system
with CSE. My problem is that, when I try to turn on CSE in the SYSTEM
C
Title: Initially setting up CSE
I finally got all the pieces, and started working on a zVM v5.2 system with CSE. My problem is that, when I try to turn on CSE in the SYSTEM CONFIG, I get then get several of the following messages in the IPL:
HCPLNM2880E MAINT 0190 is not linked, CSE LINK I