pserver

I am attempting to use pserver with cvs (have been using rsh), but am having some problems. Any help is appreciated. So far I have done the following - 1. added the following inet entries to the server machine in /etc/inet/inetd.conf - cvspserver stream tcp nowait root /opt/cvs/bin/cvs cvs -f

pserver

I've been told something by a contractor and I would like it confirmed as I could not find it described in the documentation. I was told that if I used pserver to check files even though I am on the same machine where the repository resides, it will eliminate the eol problem between che

pserver

Hallo, I'm creating remote repositories using pserver. I have some users like: dev1, dev2, dev3 and two groups: group1, group2 dev1 and dev2 are in group1 dev2 and dev3 are in group2 then I have an repository user: repoadmin my repository is: PROJECT_ONE the CVSROOT repositor

pserver

All, The doc of the protocol says : The pserver server listens on a port (in the current implementation, by having inetd call "cvs pserver") which defaults to 2401 (this port is officially registered). The client connects, and sends the following: "The client connects",

-f option to pserver / secure pserver

Hi, I have seen the -f option in the line for inetd.conf in instructions for setting up the CVS pserver and I have seen some without it. What is the effect of the -f on the pserver? If the CVS clients have .cvsrc files, will this pserver -f ignore the settings? Should the -f option be used

Re: -f option to pserver / secure pserver

Mark writes: > > What is the effect of the -f on the pserver? If the CVS clients > have .cvsrc files, will this pserver -f ignore the settings? No, -f only affects the local cvs so doing -f on the client only affects the client and doing -f on the server only affects the server. >

pserver & templates

We're switching to pserver but one of our developers is having problems committing changes from the top level.  I realize that Template is copied to the CVS directory in each subdirectory and commits in those directories work fine.  I set TopLevelAdmin=yes in CVSROOT/config but the CVS dire

pserver setup

Good Afternoon, I have a cvs "client" running on a server (machineA) and the repository setup on a bigger, beefier machine(machineB). machineB is mounted to machineA and then the pserver connection is as it normally would be; giving location of cvs exe and cvs repository. (repo

Pserver command

Does anyone know the correct syntax for using pserver command directly from a UNIX shell prompt. I tried the following, they don't work :pserver:[EMAIL PROTECTED]:repository path cvs pserver:[EMAIL PROTECTED]:repository path Thanks... ___

pserver authentication

I am running "Fedora core" linux, CVS 1.11.14...     the problem is when I try to import a module using 'Wincvs' I get the following error cvs [checkout aborted]: connect to 192.168.0.60:2401 failed: No connection could be made because the target machine actively refused it.   (I have crea

debian pserver

How do i use multiple cvsroots (on different ports)? How do i set this up? tnx, eg /var/lib/cvs is standard on 2401 (with a subdir CVSROOT) but i also would want to have /var/lib/cvs2 on 4569 (with a subdir CVSROOT) and /var/lib/cvs4on 7896 (with a subdir CVSROOT) _

pserver question

there another configuration I need to make? I didn't see anything else within the documentation about setting up pserver any different than I have. Thanks, Michael ___ Info-cvs mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/info-cvs

pserver source

I built cvs from the 1.11 sources but it does not include pserver (that I can find). Where do you get a copy of this? Stephen ___ Info-cvs mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/info-cvs

CVS pserver

I'm new to this and am attempting to set up a pserver on a linux box which will service multiple windows machines running wincvs.   I have thus far installed cvs and created a repository.  I'm not sure how to actually get pserver listening on the port I'm using.  Any help

pserver problems

Hi, I'm having some problems with the pserver of cvs. My setup: = redhat 6.2 kernel2.2.14-12 cvs1.10.7 On server side: === 1> following line in /etc/inetd.conf (all on one line) cvspserver stream tcp nowait root /usr/bin/cvs cvs --allow-root=/usr/local/cvsdb pserv

CVS pserver

I can't find pserver anywhere, where can I get a copy of pserver? Thanks, Steve Flatbush ___ Info-cvs mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/info-cvs

pserver problem

hi , I set up the pserver on my build machine. and i added cvspserver 2401/tcp in /etc/services and also made changes in inted.conf file and rebooted the machine. when i am connecting from other machine it is asking for password and when i am entering it is accepting it and making a .cvspass

Pserver problem!

I'm trying to use the pserver access method to my repository but i'm having the following problem after the login: --- CVS password: cvs login: failed to open /home/ivens/.cvspass for reading: No such file or directory cvs [login aborted]: fatal erro

pserver stalling

Hi all i am having troube with my cvs pserver. i have a repository with a lot of binary files an when a lot of users access it i seem to be getting a large set of stalled cvs pservers that are using a lot of memory. currently i have limited the number of concurent connections i have set

pserver authentication

hello friends! i have some problems to discuss with you. i am using cvs.while connecting to the server, i am using the pserver. i want to automate the process, that is i want to supply the user name and password once, and avoid the prompt of the 'cvs login' command. Is this possible

PServer problem

Hi, I have a Problem with a cvs pserver. After a cvs login, which was successful, I can't run a cvs checkout. Other commands like cvs commit or cvs update are successful, too. I get the following error: cvs server: cannot open /root/.cvsignore: Permission denied cvs [server aborted]:

Re: pserver

Rob Dreeke writes: > > cvs [login aborted]: unrecognized auth response from loneqlexprodora1: cvs > pserver: No CVSROOT specified! Please use the `-d' option That indicates that your CVS (on the server) was compiled without pserver support. -Larry Jones Girls are like slugs --

pserver processes

there seems to be cvs pserver processes hanging around after the respective client has gone on to bigger and better things. Is this normal for CVS? What causes this? Is there anyway these pserver processes can realize they have been abandoned by the client? I notice that a normal kill command

Re: pserver

Schwenk, Jeanie writes: > > I was told that if I used pserver to check files even though I am on the > same machine where the repository resides, it will eliminate the eol problem > between checkins via windoze verses unix. > > First, is it true that pserver takes care of t

Re: pserver

On Fri, Dec 07, 2001 at 17:59 -0500, Larry Jones wrote: > Schwenk, Jeanie writes: > > > > Second, is there any reason I should or should not be using pserver when I'm > > the same machine where the repositry resides? [ ... ] > > There probably isn't a

pserver permission

Hi Guys: I just finished a new installation of cvs (1.11.1p1) in a Linux Machine, I create my repository and everything looks fine except that I tried to configured the pserver method access, I was able to login creating the ~/.cvspass because the first time is not created. I created my /etc

Pserver Protocol

Where is the pserver protocol documented? The only thing I can find is the cvs source code(which I'd rather nor reverse engineer). Raj ___ Info-cvs mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/info-cvs

pserver issue

Currently our local users use NFS to access the CVS repositories. We are also using pserver for our remote users. The CVSROOT/module file runs a script that creates some symbolic links and this works fine via NFS but not with pserver (the script is executed on the server, not the client). Does

pserver troubles

I'm sure everyone on this list is tired of hearing from me, but I've switched over to a paserver setup as recommended by the kind people here, and now we're having connection refused errors. I followed all of the steps laid out in the CVS manual (2.9.3.1 Setting up the server for password authent

pserver problem

I'm getting the following response when trying to log into my newly created cvs server via pserver: > cvs -d :pserver:(user@host):/usr/local/cvsrepos login (Logging in to (user@host)) CVS password: cvs [login aborted]: unrecognized auth response from (host): Unknown command: `pserve

CVS pserver

Hello, I have attempted to setup a pserver on a RedHat Linux 6.1 I created a repository and a CVSROOT/passwd file as folows Here is a sample /home/cvs/CVSROOT/passwd file I created: stergios:KCQ59yEQ/KIwg koros:ZFAYjjBNQl6b6 But on attempt to login to the server get an

CVS pserver

Hello, I have attempted to setup a pserver on a RedHat Linux 6.1 I created a repository and a CVSROOT/passwd file as folows Here is a sample /home/cvs/CVSROOT/passwd file I created: stergios:KCQ59yEQ/KIwg koros:ZFAYjjBNQl6b6 But on attempt to login to the server get an

pserver problems

CVSers, Hi! Can anyone please provide me with more information about the AIX 2401 port patch? Will the system password lookup fail if the encrypted password is not kept in /etc/passwd (i.e. there is password shadowing)?? (pserver access; in CVSROOT/config we have SystemAuth = yes). Does AIX

Re: pserver

thanks for the note. yes, I modified the modules file in $CVSROOT/CVSROOT. it looks sth like this: aliasModule -d . modulename It worked fine locally. I can just checkout aliasModule. but once I switch to pserver, things fall apart. --Walter Walter M. Yuan-- CASSEL, Dept. of Econ

pserver probelm

Hi all , I have redhat 5.2 and I am using cvs 1.10 , pserver method. Some times I have problem of connection getting refused to port 2401 I am restarting the inetd and it works fine . /var/log/messages file shows following messages May 7 14:16:43 abhinav inetd[259]: 2401/tcp server failing

Pserver errors

I have been having problems login to cvs using pserver I have now changed the entry in inetd.conf to "cvspserver stream tcp nowait root /usr/bin/cvs cvs --allow-root=/home/cvsroot pserver". This has fixed part of the problem and I can now log in from our windows terminal using WinCV

pserver problem

/server compile note: src/options.h ---> commented out CVS_BADROOT   Now, my inetd.conf file looks like this:   cvspserver stream tcp nowait root /usr/local/bin/cvs cvs --allow-root=/opt/cvs/gtsdev pserver   the services file:   cvspserver 2401/tcp   cvs config file:   SystemAuth=no   I hav

Re: pserver

. - Thomas Jefferson Rafal Kedziorski wrote: > Hallo, > > I'm creating remote repositories using pserver. > > I have some users like: > > dev1, dev2, dev3 > > and two groups: > > group1, group2 > > dev1 and dev2 are in group1 > dev2 and dev3 a

PServer authentication

Are there documents pertaining to using PServer authentication for CVS? I have not been able to get a single authentication remotely using PServer on my OpenBSD 2.7 box. I have tried creating a $CVSROOT/CVSROOT/passwd with blank passwords (e.g. user::access) and this resulted in the same

Re: pserver

Arnaud De Timmerman writes: > > If I execute "telnet myhost 2401" then type BEGIN AUTH REQUEST then Return, the > server says : > > cvs [pserver aborted]: bad auth protocol start: BEGIN AUTH REQUEST" > > > Where am I wrong ? The server wants to see

pserver groups

Hello, Is there anyway for pserver to grant 'group' access to a user? I have several projects and would like to grant users access to different projects, an example of what I'm looking for is: user1::proj1 user2::proj1,proj2 I know this doesn't work, but is there a w

pserver problems

When trying to log in to cvs via pserver, I get this response: cvs [login aborted]: unrecognized auth response from : Usage: cvs [cvs-options] command [command-options-and-arguments] The user exists on the target system, and I've set up the user in the password file (which I added t

pserver passwd

peer machine cvs -d :pserver:[EMAIL PROTECTED]:/usr/local/atest/cvsmain login (Logging in to [EMAIL PROTECTED]) CVS password: cvs [login aborted]: recv() from server lor.kovaiteam.com: Connection reset by p eer by arul ___ Info-cvs

CVS_RSH w/ pserver

We've switched from NFS CVS access to pserver and just realized that setting CVS_RSH to ssh is only meaningful for :ext, not :pserver. Before I dive into SSH, does anyone know a way to encrypt pserver traffic? Thanks, Frank -- Frank Gilmurray Release Engineer Nokia

connection using pserver

Hi, Just a small question: Do users connecting using the pserver method need a real account (shell login, home directory,...) on the machine running cvs pserver? Cyrille -- Cyrille Bollu - Software Development Engineer AWTCE - Navigation Department Tel. +32

debugging pserver ( protocol )

hey, what's the protocol for debugging cvs, in particular 'cvs pserver'? I'd like to start 'cvs pserver' on the command line, ping it with requests, and break to see where the requests lead.. However, I see from running 'cvs pserver' from the command l

HOWTO: debug pserver

Ok, I went through the ordeal of debugging pserver (with gdb) and didn't find a good hit whilst searching through google, so I offer the following instruction guide to debugging the client/server interaction via gdb (thanks larry jones for pointers): 1) Open up two windows for gdb, on

Re: pserver setup

Richard Pfeiffer writes: > > I have a cvs "client" running on a server > (machineA) and the repository setup on a bigger, > beefier machine(machineB). machineB is mounted > to machineA and then the pserver connection is as > it normally would be; giving location of

Problem with pserver

Hi there! We are using the latest stable version of cvs here at work for out developers but we have ran into trouble. It seems some users can't access the cvs via pserver from home either ISDN or modem connecting to the corp lan. >From work it works like a charm, no problems at all

pserver detailed description?

Hello, is pserver protocol somewhere described (in deep details)? Well, I don't count source codes of cvs ;-) -- Best regards, Dusan Juhas ___ Info-cvs mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/info-cvs

RE: Pserver command

PAL, AARTI (SBCSI) > Sent: Wednesday, February 04, 2004 9:34 AM > To: [EMAIL PROTECTED] > Subject: Pserver command > > > Does anyone know the correct syntax for using pserver command > directly from > a UNIX shell prompt. I tried the following, they don't work > >

RE: Pserver command

I already have it set up and working through inetd. What I'm trying to get to work is if a client wants to access the CVS repository remotely from another UNIX development box on which they are set up, how will they get authenticated through pserver to the CVS repository from their box, so

RE: Pserver command

Make sure their userId|password(encrypted)|cvsUserId is in the $CVSROOT/CVSROOT/passwd file on the pserver machine. Assuming that they have set up their CVSROOT env variable, then they 'cvs login' and they should then be able to proceed. > -Original Message- > From:

Re: Pserver command

"RAJAGOPAL, AARTI (SBCSI)" writes: > > Does anyone know the correct syntax for using pserver command directly from > a UNIX shell prompt. Yes, anyone who's read the manual: <http://www.cvshome.org/docs/manual/> > I tried the following, they don'

RE: Pserver command

To: RAJAGOPAL, AARTI (SBCSI) Cc: [EMAIL PROTECTED] Subject: Re: Pserver command "RAJAGOPAL, AARTI (SBCSI)" writes: > > Does anyone know the correct syntax for using pserver command directly from > a UNIX shell prompt. Yes, anyone who's read the manual: <

RE: Pserver command

RAJAGOPAL, AARTI (SBCSI) wrote: > Thanks..I did go through the manual, did a cvs login and its > asking me for a > CVS password...I entered the same password as in the passwd > file, but that > failed to authenticate? Ummm... what exactly do you mean by "the same password as in the passwd file"?

RE: Pserver command

It's working nowI had to manually create a .cvspass file in my home directory to execute the cvs login command first using pserver. I was then able to execute cvs commands after the CVSROOT env variable was set appropriately. The password I used to login was the plaintext version o

Re: Pserver command

"RAJAGOPAL, AARTI (SBCSI)" writes: > > We are using CVS 1.11.6. Normally isn't the .cvspass created by CVS? Or is > this is a bug in this version? Has it been fixed in later versions? Thanks. Yes, yes, and yes. -Larry Jones There's a connection here, I just know it. -- Calvin

RE: Pserver command

What version contains the bug fix? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, February 05, 2004 10:39 AM To: RAJAGOPAL, AARTI (SBCSI) Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: Pserver command "RAJAGOPAL, AARTI (SBCSI)&qu

Re: Pserver command

"RAJAGOPAL, AARTI (SBCSI)" writes: > > What version contains the bug fix? Actually, I misremembered -- not creating ~/.cvspass was a bug in 1.11.1 that was fixed in 1.11.2. 1.11.6 should have warned you that the file did not exist but then gone ahead and created it. Are you sure the *client* wa

Re: pserver authentication

kout aborted]: connect to 192.168.0.60:2401 failed: No connection could be > made because the target machine actively refused it. You haven't correctly set up [x]inetd on your server to listen for CVS pserver connections. See the manual for troubleshooting advice: <http://www.cvshom

Changing pserver password

Is is possible for a user to change his password on the CVS pserver using the pserver protocol? Or is the only way to change it, that the admin checks out CVSROOT, edits passwd, and commits it back? urs ___ Info-cvs mailing list [EMAIL PROTECTED

kserver vs pserver

When trying to switch to a kerberos authentication verses the pserver authentication. Is the only item that needs to change is the cvs server itself? Do we need to run a CVS client that also supports kerberos authentication or does the CVS protocol even change because the server now

Re: debian pserver

would want to have > /var/lib/cvs2 on 4569 (with a subdir CVSROOT) > and > /var/lib/cvs4on 7896 (with a subdir CVSROOT) Multiple cvsroots are available using a single pserver with multiple - --allow-root options given to the inetd.conf 'cvs pserver' command. There is

Re: debian pserver

> > How do i use multiple cvsroots (on different ports)? > > How do i set this up? > > > Multiple cvsroots are available using a single pserver with multiple > - --allow-root options given to the inetd.conf 'cvs pserver' command. > > There is a thread

perl pserver client?

Hi - Is anyone aware of a perl pserver client for cvs? I'm interested in this for a reporting hook. thanks for any pointers... -Russ ___ Info-cvs mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/info-cvs

pserver - getting down

Hi , I have two issues : 1 . uses by default . But how to get simply without -c option . 2. When I use orfor a module having nearly 1000 files , pserver is getting down . Message is shown like the following at the middle cvs [log aborted]: connect to nms-build:2401 failed

RE: pserver question

they forgot to remove... which could be a security problem. So edit the passwd file directly from the tree... Kevin -Original Message- From: Furmaniuk, Michael [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 27, 2001 9:37 AM To: Info-Cvs (E-mail) Subject: pserver question I tried

RE: pserver question

EMAIL PROTECTED]] Sent: Tuesday, February 27, 2001 9:57 AM To: 'Furmaniuk, Michael'; Info-Cvs (E-mail) Subject: RE: pserver question check in your actualy cvs tree and make sure the passwd file that is there is the one you want. the passwd file is not included in the checkout/commit of CVSROO

Re: pserver question

Furmaniuk, Michael writes: > > I know the passwd file is updated, I have had the new passwd file checkout > with CVSROOT, I've deleted the directory and checked it out again to get the > file. When I have done the update the changes show up there. But it's $CVSROOT/CVSROOT/passwd that's signi

RE: pserver question

ECTED] Subject: Re: pserver question Furmaniuk, Michael writes: > > I know the passwd file is updated, I have had the new passwd file checkout > with CVSROOT, I've deleted the directory and checked it out again to get the > file. When I have done the update the changes show up the

Re: pserver question

> From: "Furmaniuk, Michael" <[EMAIL PROTECTED]> > Date: Tue, 27 Feb 2001 09:37:10 -0500 > > My problem: > I ... have changed the line in > config to SystemAuth=no, and added the passwd file, > > However, if I try to use the passwd file I either get an incorrect > password error if I chan

Standalone CVS pserver

I read a thread from last year that mentioned the same type of issue I am looking to resolve, although I did not find any appropriate answers. I am looking to set up a cvs pserver, however it will be located on my hosting provider's machine. I have shell access and have compiled/inst

Re: pserver question

Peter Ajamian wrote: > The passwords are not stored plain text in the passwd file, they have to > be encrypted with the crypt() function. There's a utility available > that I just finished work on this past week which will maintain the > passwd and readers files for you automatically (it works s

Re: pserver question

On Thu, Mar 01, 2001 at 11:38:16AM -0500, Derek R. Price wrote: > Peter Ajamian wrote: > > There's a utility available > > that I just finished work on this past week which will maintain the > > passwd and readers files for you automatically (it works similar to the > > regular Unix passwd program

Re: pserver question

"Derek R. Price" wrote: > > Peter Ajamian wrote: > > > The passwords are not stored plain text in the passwd file, they have to > > be encrypted with the crypt() function. There's a utility available > > that I just finished work on this past week which will maintain the > > passwd and readers

Re: pserver question

Jari Aalto+usenet wrote: > > * Thu 2001-03-01 [EMAIL PROTECTED] (Peter Ajamian) gnu.cvs.help > * > | Ceartainly that will encrypt the password for you, but the cvspwd > | utility I created will fully manage the passwd and readers files for > | you, allowing you to add and remove users, set them

Pserver Login problem

t now I am using pserver as internally we want that to work first. What I have done so far is: - CVS is built correctly, I have done the telnet test on 2401 and get the proper response. - Put pserver into inetd.conf (I know its active as I can access it using a system account). - Have t

Re: pserver source

Stephen Morley writes: > > I built cvs from the 1.11 sources but it does not include pserver (that I > can find). Where do you get a copy of this? pserver is part of cvs, not a separate executable. If you do ``cvs --help-commands'', you should see ``pserver'' in

Re: pserver problems

MOHIT A LAD writes: > > My setup: > = > redhat 6.2 kernel2.2.14-12 > cvs1.10.7 I strongly suggest upgrading to the current release (1.11), which you can get from www.cvshome.org, but that isn't what's causing your problem. > 1> export CVSROOT=:pserver:mohit@baharat:/usr/local/cvsdb > 2

Re: CVS pserver

Steve Flatbush wrote: > >I can't find pserver anywhere, where can I get a copy of pserver? > pserver is not a separate program. It is simply a command specified on the cvs command line (actually in inetd.conf but why split hairs?). -- Stephen Rasku E-mail: [E

Re: CVS pserver

Flatbush, Steve writes: > > I can't find pserver anywhere, where can I get a copy of pserver? It's a CVS subcommand (like checkout and update), not a separate program. -Larry Jones Kicking dust is the only part of this game we really

Re: pserver problems

Hi Larry, Thanks for the prompt response. You were right on that one. I stopped the ypibnd - NIS binding process and the things seem to be moving forward. Now I created a sample project dir 'myproj' having sub-dirs 'bin', 'src' & 'inc'. When I try to *import* this project into the repository i

Re: pserver problems

MOHIT A LAD writes: > > When I try to *import* this project into the repository it throws the > following error: > > cvs import -m "initial import into CVS" myproj mohit start > cvs server: cannot open /root/.cvsignore: Permission denied This is a *very* frequently asked question. See the manua

Re: pserver problem

; chandra shekhar writes: > > > > I set up the pserver on my build > > machine. and i added cvspserver 2401/tcp in > /etc/services and also > > made changes in inted.conf file and rebooted the > machine. when i am > > connecting from other machine it is asking

Re: pserver problem

kanakpalli chandrashekhar writes: > > thank you larry i used the perl script given in karl > fogel book. i entered the password generated by script > in cvsroot/passwd file. when i am trying from other > machine it is give :fatal error . can u explain me the > format . http://cvshome.org/docs/ma

Re: pserver problem

chandra shekhar writes: > > I set up the pserver on my build > machine. and i added cvspserver 2401/tcp in /etc/services and also > made changes in inted.conf file and rebooted the machine. when i am > connecting from other machine it is asking for password and when i am &

newbie pserver question

I know this is going to seem really naive, but I'm really stuck with this. I've installed CVS pserver on a linux box and it seems to work quite happily. What I'm trying to do now is test a bunch of mac and windows clients. I've started with WinCVS. My situation is t

Re: pserver problem

kanakpalli chandrashekhar wrote: > > thank you larry i used the perl script given in karl > fogel book. i entered the password generated by script > in cvsroot/passwd file. when i am trying from other > machine it is give :fatal error . can u explain me the > format . Try the CVSpwd program loca

CVS Pserver installation

Sir, I am using RedHat Linux 7.0 , and i want to configure pserver, so that users can access repository remotely. I have made a file in directory /etc/xinetd.d in the name cvspserver, for entering details of server, but i am still not able to connect the server. Can you just guide me what should

Re: Pserver problem!

=?iso-8859-1?Q?Ivens=20Porto?= writes: > > CVS password: > cvs login: failed to open /home/ivens/.cvspass for reading: No such file > or directory > cvs [login aborted]: fatal error: exiting [...] > The interesting thing is that if i make a: > > touch ~/.cvspass > > and try to login again again

Re: pserver authentication

Awais Majeed writes: > > i have some problems to discuss with you. i am using cvs.while connecting > to the server, i am using the pserver. i want to automate the process, > that is i want to supply the user name and password once, and avoid the > prompt of the 'cvs log

Re: PServer problem

[EMAIL PROTECTED] wrote: > > Hi, > > I have a Problem with a cvs pserver. After a cvs login, which was > successful, I can't run a cvs checkout. Other commands like cvs > commit or cvs update are successful, too. > > I get the following error: > > cvs s

Re: PServer problem

[EMAIL PROTECTED] writes: > > cvs server: cannot open /root/.cvsignore: Permission denied > cvs [server aborted]: can't chdir ( /root ): Permission denied Upgrade to the current release of CVS (1.11.1p1), which you can get from www.cvshome.org, or go search the archives for this very common prob

Re: pserver processes

Mark writes: > > there seems to be cvs pserver processes hanging around after the respective > client has gone on to bigger and better things. What release of CVS and what platform? That indicates that clients are going away without properly closing their connections to the serv

Re: pserver processes

cvs 1.11.1p1 server/client on solaris 2.6 and cvs 1.11 client on Windows NT (plus some mach next 3.3 machine clients 1.11.1p1). We are running psever with non-root account from inetd.conf I usually wait more than 24hrs before cleaning up misc pserver processes. Is it possible that the client

Re: pserver processes

Mark writes: > > Is it possible that the client is responding to the KEEPALIVE signal, even > though it no longer needs/uses that particular pserver process? on UNIX the > client process exits after the command runs, I am unsure about windows and > WinCVS. I suppose it's po

RE: pserver permission

ation? Moises. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 13, 2002 3:42 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: pserver permission Zanabria, Moises writes: > > When I run the EXT method I don't have

Re: pserver permission

, but when you run with :pserver:, you specify an explicit userid: :pserver:user@host:/CVS -Larry Jones I never get to do anything fun. -- Calvin ___ Info-cvs mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/info-cvs

RE: pserver permission

ECTED] Subject: Re: pserver permission Zanabria, Moises writes: > > Thanks for the quickly response Larry, but I'm confuse , my user it belongs > to the same group that CVSROOT directory owner: But is that the user you specified in your $CVSROOT? When you run with :ext:, your local us

  1   2   3   4   5   6   7   8   9   10   >