Hi,
The notifyd documentation is apparently in error...
The notifyd(8) page says:
mailto
Email the notification. This method can ONLY be used in a
Sieve 'notify' action as it requires a mailto: URL to be
specified as an :option.
Here
Quoting Mark Keasling [EMAIL PROTECTED]:
Hi,
The notifyd documentation is apparently in error...
The notifyd(8) page says:
mailto
Email the notification. This method can ONLY be used in
a
Sieve 'notify' action as it requires a mailto: URL to be
- Original Message -
From: Lists [EMAIL PROTECTED]
To: Cyrus-Info [EMAIL PROTECTED]
Sent: Monday, October 28, 2002 6:34 PM
Subject: Re: configure --without-krb fails, looking for Kerberos
Ian,
Try using --with-auth=unix instead of --without-des
Does this bit of the manual mean that
Hi:I'm having a problem getting Cyrus IMAP to work with OpenLDAP. User
cliff.clavin is under ou=Users,dc=gregbox,dc=com. When I run imtest, here
is the error I get...thanks everyone so much in advance:
[rootLunar]:/home/gchagnon imtest -m login -a cliff.clavin localhost
S: * OK Lunar Cyrus
Ian McDonald wrote:
Try using --with-auth=unix instead of --without-des
Does this bit of the manual mean that if I do not want to store
authorization information in /etc/passwd, because the mailbox users have
nothing to do with the unix users, I need to use Kerberos?
--with-auth=unix only
Actually no. I read it as --with-auth=AnythingButKerberos :-)
There are many ways to configure unix auth. I'm using the saslauthd which
points to PAM which then points to a MS Active Directory server.
- Original Message -
From: Ian McDonald [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent:
On Tue, 29 Oct 2002, Ian McDonald wrote:
- Original Message -
From: Lists [EMAIL PROTECTED]
To: Cyrus-Info [EMAIL PROTECTED]
Sent: Monday, October 28, 2002 6:34 PM
Subject: Re: configure --without-krb fails, looking for Kerberos
Ian,
Try using --with-auth=unix instead of
Test saslauthd first. cd $cyrus-sasl-src/saslauthd; make testsaslauthd
./testsaslauthd -u username -p password
If you do not get OK, check syslog for saslauthd errors.
-Igor
On Tue, 29 Oct 2002, Gregory Chagnon wrote:
Hi:I'm having a problem getting Cyrus IMAP to work with OpenLDAP. User
One thing I left out, here is an entry from /var/log/auth.log which is
entered everytime I try imtest:
Oct 29 09:31:37 Lunar imapd[5495]: cannot connect to saslauthd server: No
such file or directory
From: Gregory Chagnon [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: cyrus-sasl / ldap
Igor:
I get this error when I run testsaslauthd:
[root@Lunar]:/usr/src/cyrus-sasl-2.1.9/saslauthd ./testsaslauthd -u
cliff.clavin -p *
connect() : No such file or directory
From: Igor Brezac [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: Gregory Chagnon [EMAIL PROTECTED]
CC: [EMAIL
Hi,
Sorry to come back with yet another question ..
My Cyrus installation is failing because it cannot find the compile_et
executible. Compile_et.sh is part of the acap directory, but there's no
information there on how to install it by itself. (I could guess, but I
don't like to guess these
For me it work fine :
try saslauthd.conf :
ldap_servers: ldap://localhost:389
ldap_search_base: dc=gregbox,dc=com
ldap_scope: sub
Start sasl with specifie saslauthd.conf and mech:
/usr/local/sasl/sbin/saslauthd -a ldap -O
your_location/saslauthd.conf
in my imapd.conf i have only (for sasl)
looks like mkimap isn't converting [0-9] to q, yet the imap/create mailbox
stuff is?
1community# du domain
2 domain/1/1community.net/a
2 domain/1/1community.net/b
2 domain/1/1community.net/c
2 domain/1/1community.net/d
2 domain/1/1community.net/e
2
It looks like saslauthd is not running or testsaslauthd is pointing to a
wrong socket. I am not sure where you got your rpm sources from, but I
suggest that you get the sources from CMU and recompile:
http://asg.web.cmu.edu/cyrus/download/
I recommend that you download cyrus-sasl from CVS:
[root@Lunar]:/var/log /etc/init.d/saslauthd status
saslauthd (pid 7636 7635 7634 7631 7630) is running...
So it looks like saslauthd is running...I got the source RPMs from the RH 8
CD. I don't think it's a problem with saslauthd, I think it's a problem
with Cyrus IMAP...
-Greg
From:
First off, insert newbie alert here...
I've just installed cyrus-imapd from the FreeBSD ports tree (newest
revision, as of a couple of days ago), but can't get sieve to work.
I'm not sure exactly why, or how to go about debugging sieve. I do
have a sieve script in place, and I'm pretty sure it's
I got testsaslauthd to work...I had to specify the socket:
[root@Lunar]:/usr/src/cyrus-sasl-2.1.9/saslauthd ./testsaslauthd -u
cliff.clavin -p -f /var/run/saslauthd/mux
0: NO authentication failed
Do I have to specify anywhere in Cyrus imapd where to look for this socket
as well?
-Greg
Perhaps this is a known issue. I haven't seen any mention of it though.
I just upgraded from cyrus-imap 2.0.16 to 2.1.9. The 2.0.16
installation was all built from source, the new installation uses Simon
Matter's RPMS (rebuild on my machine). The problem I'm seeing is that
mail clients that
One more thing...now when I run testsaslauthd, I get this entry in
/var/log/ldap.log:
Oct 29 14:13:58 Lunar slapd[5790]: conn=102 op=1 SRCH base= scope=2
filter=(uid=greg.chagnon)
Oct 29 14:13:58 Lunar slapd[5790]: send_ldap_result: conn=102 op=1 p=3
Oct 29 14:13:58 Lunar slapd[5790]:
On Tue, 29 Oct 2002, Gregory Chagnon wrote:
I got testsaslauthd to work...I had to specify the socket:
[root@Lunar]:/usr/src/cyrus-sasl-2.1.9/saslauthd ./testsaslauthd -u
cliff.clavin -p -f /var/run/saslauthd/mux
0: NO authentication failed
Do I have to specify anywhere in Cyrus
On Tue, 29 Oct 2002, Gregory Chagnon wrote:
One more thing...now when I run testsaslauthd, I get this entry in
/var/log/ldap.log:
Oct 29 14:13:58 Lunar slapd[5790]: conn=102 op=1 SRCH base= scope=2
filter=(uid=greg.chagnon)
Oct 29 14:13:58 Lunar slapd[5790]: send_ldap_result: conn=102 op=1
Thanks Igor, that helped a little...now it looks like it's being
authenticated against the LDAP database and getting granted access.
However, when I run imtest -m login -a cliff.clavin localhost, I get this:
[root@Lunar]:/usr/src/cyrus-sasl-2.1.9/saslauthd imtest -m login -a
cliff.clavin
Hello,
i'm using cyrus-2.1.9 and sasl 2.1.9, and pop3d sometimes doesn't respond.
That means, when I do this:
[rootsinclair tmp]# telnet localhost 110
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
pop3d does't respond...
but
[rootsinclair tmp]# telnet localhost 143
I've normally seen this when you've got a stale pop3d running. I've
also seen this with corrupt databases, but that would cause imapd to
fail also.
Try shutting down master and see what's still running. I'd bet there
will still be a pop3d.
On Tue, 2002-10-29 at 09:23, Felix Cuello wrote:
Cyrus: 2.1.9
We suffered some data corruption on our cyrus box and the mailboxes.db and
the db/ folder were lost. When we start cyrus, ctl_cyrusdb just hangs with
the following strace:
open(/export/cyrus/imap/mailboxes.db, O_RDWR|O_LARGEFILE) = 6
fcntl64(6, F_SETFD, FD_CLOEXEC) = 0
On Tue, 29 Oct 2002, Gregory Chagnon wrote:
Thanks Igor, that helped a little...now it looks like it's being
authenticated against the LDAP database and getting granted access.
However, when I run imtest -m login -a cliff.clavin localhost, I get this:
Wow, that really stinks. At this point I dont really have a choice though.
Can you give me specifics on how you made a flat text file backup and how
you reconstructed things using that?
Thanks,
Lee
From: Robert Scussel [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: Joe Finkle [EMAIL
Just run :
sudo -u cyrus /usr/cyrus/bin/ctl_mboxlist -d filename
and then after you have moved the old one out of the way (import over
the old doesn't/didn't work well) then just do:
sudo -u cyrus /usr/cyrus/bin/ctl_mboxlist -u filename
Before you start, let me clarify:
remove the
Last time we had this problem we had to move mailboxes.db out of the
way, remove everything in /var/spool/imapdb/ and then recreate our
mailboxes.db file from a flat text backup and then run reconstruct,
which takes awhile depending on you number of users.
Hopes this helps,
B
Joe Finkle
Robert,
Just to confirm, I do not need to remove all of /var/imap, just /var/imap/db
and /var/imap/mailboxes.db?
Thanks,
Lee
From: Robert Scussel [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: Joe Finkle [EMAIL PROTECTED]
CC: [EMAIL PROTECTED]
Subject: Re: Reconstructing Mailboxes - HELP!
Hi,
Here is what I did to get sieve to working on Solaris 8 with cyrus-imapd-2.1.9.
I don't think these actions are OS specific so I'm passing them along.
If you haven't already done so, check the documentation...
Man pages: imapd.conf(5), cyrus.conf(5), timsieved(8), master(8)
doc files:
Do you have the line that starts pop3d in cyrus.conf? Check the
imapd/messages logs when you connect to the pop3 port to see if any
errors appear.
Also, try killing and restarting master. Don't forget to kill all the
processes that were started by master before restarting it.
--
Eugene
Dear Eugene
Could I ask if a pop3d process is left running?
I had a similar problem using cyrus-imap 2.0.16 on Solaris 2.5 and by
changing the following at the bottom of service.h in the master directory the
problem vanished.
enum {
MAX_USE = 1,
REUSE_TIMEOUT = 10
};
What happens is
Stephen Carr wrote:
Dear Eugene
Could I ask if a pop3d process is left running?
Sorry... I don't get what you mean by left running.
If master is killed, the processes that it spawned will still remain and
will not die immediately until after a predefined period of time passes
without any
34 matches
Mail list logo