On 03/16/2011 07:06 AM, Markus Hanauska wrote:
>
> On 2011-03-16, at 11:27 , Philip Homburg wrote:
>
>> You look up the MAC address for that IPv6 address and then block the MAC
>> address on your switches. Problem solved.
>
> Sure, that will work. However, that means I have to invest time and wo
On 03/12/2011 06:29 AM, Fernando Gont wrote:
> On 09/03/2011 08:17 a.m., Mikael Abrahamsson wrote:
>
>>> I recommend that folks read the above draft. I haven't seen the
>>> I-D announcement get cross-posted to the IPv6 WG, perhaps due to
>>> the volume of recent I-D postings, and the topic seems
Hagen Paul Pfeifer wrote:
> Small addendum: RFC 3542 specify a socket option (11.2.) called IPV6_DONTFRAG,
> maybe this is the option you are searching for:
>
> This specification defines a mechanism to turn off the automatic
> inserting of a fragment header for UDP and
nded to cover text representation
> of IPv6 addresses + ports, and discuss this issue?
>
> -Dave
> ________
> From: Brian Haley [brian.ha...@hp.com]
> Sent: Thursday, May 14, 2009 11:31 AM
> To: IPv6 WG Mailing List
> Cc: Dave Thaler; Bria
Dave Thaler wrote:
> I read and I agree with the document except for Appendix A.
>
> For one, I disagree that v4 mapped addresses are not recommended.
> They're commonly used for sockets that support both IPv4 and IPv6.
I would agree with Dave. If you ssh to any recent Linux system over IPv4 you
Hi,
Nicolas Dichtel wrote:
I've a question about source address selection in HAAD Reply message.
...
RUT is a Home Agent and the Home Link is Link0.
This is important.
MN1X sends a HAAD Request message to its home agent (RUT). The
destination address of this message is an anycast address.
Thomas Narten wrote:
For changes to the router intervals, that seems like the kind of minor
change/clarification that has been allowed in other documents. And
note that we are _recycling_ at draft, not _advancing_ to draft.
A discussion about advertisement intervals happened back on 10/29/06 -
Thomas Narten wrote:
This is in a lab, before deployment, before many other vendors start
writing their own code to make use of this message.
Let's be real. Anyone doing an implementation from scratch from the
specs would (with high probality) do its first test against a
well-known, readily av
Overall comment:
1. The draft talks about setting flag X and flag not-X, but the only
place I see where this can happen is trying to set these together:
IPV6_PREFER_SRC_CGA | IPV6_PREFER_SRC_NONCGA
AI_PREFER_SRC_CGA | AI_PREFER_SRC_NONCGA
Am I missing something? Can I somehow t
A New Internet-Draft is available from the on-line Internet-Drafts directories.
Title : IPv6 Socket API for source address selection
Author(s) : E. Nordmark, et al.
Filename: draft-chakrabarti-ipv6-addrselect-api-03.txt
Hi Samita, Erik, and Julie
Alex Conta wrote:
The ICMPv6 specification describes the ICMPv6 protocol, a set of ICMPv6
error and informational messages, and some rules and/or suggestions on
handling ICMPv6 messages. Why should "in transit" ICMP messages be
outside its scope?
Others have pointed out that's not how they read
Alex Conta wrote:
Are there any implementations were ICMP rate limiting is implemented
separately from other protocol packets traffic management (traffic
shaping)?
HP has at least one UNIX that does ICMPv6 and Mobility Header in common
code, Linux does ICMPv4/v6 together on a per-route basis.
I
12 matches
Mail list logo
