Great!
Where exactly do I put this in? In modprobe.conf? As I said in my last
mail,
I'm loading the modules manually right now, but I'd like to do them from
modprobe.conf. What lines should I insert into modprobe.conf? Do I need
to
load each of the drivers individually?
Your modprobe.co
Thanks Bryan.
>
> > Yes, with 0.3.x I've always had it think it's a 250. I've never been
> > able to get 0.3.x to recognize the card as a 150, even though 0.2 does
> > successfully recognize it as 150.
>
> Actually neither autdetect properly. The 0.2 series defaults
> unknown cards to 150s an
Thanks...
ivtv: i2c client addr: 0x21 not found for command 0x40046403!
ivtv: i2c client addr: 0x21 not found for command 0x40046404!
ivtv: Setting audio matrix to input 3, output 1
ivtv: i2c client addr: 0x40 not found for command 0x40086d11!
ivtv: i2c client addr: 0x40 not found for command 0x
Hi,
What ivtvctl options do you suggest? I did try going through each of the
inputs via ivtvctl -p# where # is 0-7
only -p0 and -p1 got me video, but BOTH in b&w. The best audio came
from -p1
Both 0 and 1 are svideo and should work equally as well, when working
(for what it's worth).
Ri
Thanks.
See below for the ivtv dmesg output...
- Original Message -
From: "Edward Brookhouse" <[EMAIL PROTECTED]>
To:
Sent: Monday, July 18, 2005 8:24 AM
Subject: RE: [ivtv-devel] Fw: [UNKNOWN CARD] please help PVR-150 only
getting b&w video
Also Try this -
After boot - look at
Hi,
- Original Message -
From: "Rudy Zijlstra" <[EMAIL PROTECTED]>
To:
Sent: Sunday, July 17, 2005 4:23 PM
Subject: Re: [ivtv-devel] Fw: [UNKNOWN CARD] please help PVR-150 only
getting b&w video
> Mark Knecht wrote:
>
> >On 7/17/05, Rudy Zijlstra <[EMAIL PROTECTED]> wrote:
> >
> >
> >>
Hi all,
Sorry to re-post, but I've had no responses at all... can someone help me
out?
Thanks
Ricardo
- Original Message -
From: "Ricardo Kleemann" <[EMAIL PROTECTED]>
To:
Sent: Friday, July 15, 2005 5:04 PM
Subject: [UNKNOWN CARD] please help PVR-150 only ge
Hi,
I have a PVR-150MCE, and I've tried both 0.2 and 0.3 drivers, but all I ever
get is b&w video. I'm using the S-Video input.
This is on FC4, kernel 2.6.12-1.1390_FC4smp. I tried the 0.2 driver as well
as 0.3.6w. With 0.2, I get video and audio fine, except that video is b&w.
With 0.3.6w,
