Yep, just put your jar into lib/ext and use full class name.
-
--
Andrey Pohilko
JP@GC Maintainer
--
View this message in context:
http://jmeter.512774.n5.nabble.com/Writing-a-filter-for-Access-Log-Sampler-tp4662732p4662948.html
Sent from the JMeter - User mailing list archive at Nabble.com
I want to write a custom filter for Access Log Sampler, and I am having
trouble finding how to do it. I see SessionFilter and LogFilter in the
jmeter source code, so I can figure out how to code it, but I don't know
where to put my new class. Can I just put it in a jar in the ext and ha
:
> >Ideally the access log sampler would work as follows:
> >-recognize 'session id' to the access log
> >-access log sampler groups requests from the same sessions into the same
> >session. (it can't re-use the exact same session ID as the servlet
> container
&
all 5000 requests came from the same session, we would not see the
> "session expiration overhead".
>
> Technically I've read that Jmeter basically tries to 'recreate sessions' by
> lumping together requests from the same IP address, but have not confirmed
>Ideally the access log sampler would work as follows:
>-recognize 'session id' to the access log
>-access log sampler groups requests from the same sessions into the same
>session. (it can't re-use the exact same session ID as the servlet
container
>generates it
quests came from the same session, we would not see the "session
expiration overhead".
Technically I've read that Jmeter basically tries to 'recreate sessions' by
lumping together requests from the same IP address, but have not confirmed
how the access log sampler simulates t
meter and have interest in using the access log sampler to
> recreate "actual load" from a very busy system.
>
> Anyone on the list using it currently? Can you share your insights &
> recommendations?
>
> We really would like it to replay 'posts' (i.e. as well
k
On Wed, Feb 23, 2011 at 2:34 PM, Will Milspec wrote:
> hi all,
>
> I'm new to jmeter and have interest in using the access log sampler to
> recreate "actual load" from a very busy system.
>
> Anyone on the list using it currently? Can you share your insights &
>
hi all,
I'm new to jmeter and have interest in using the access log sampler to
recreate "actual load" from a very busy system.
Anyone on the list using it currently? Can you share your insights &
recommendations?
We really would like it to replay 'posts' (i.e. as
Please don't send duplicate messages to the mailing list.
Please also read the manual before posting questions.
Your question is discussed in the manual.
On 24/02/2009, Rekha_Arsi wrote:
>
> Hi all,
>
> Please tell me how can I use access log sampler in my test pla
Hi all,
Please tell me how can I use access log sampler in my test plan. what is
the actual purpose of using access log sampler.
Please give me one example of implementing access log sampler in jmeter.
Thanks and Regards
Rekha Arsi
Mobile : 9866501404
DISCLAIMER:
This email
Hi all,
Please tell me how can I use access log sampler in my test plan. what is
the actual purpose of using access log sampler.
Please give me one example of implementing access log sampler in jmeter.
Thanks and Regards
Rekha Arsi
Mobile : 9866501404
DISCLAIMER:
This email
On 18/02/2009, Suvendu_Mohapatra wrote:
> Hi Team,
>
> I want to use the Access log sampler in my test plan to access the logs of
> my server which is tomcat and is configured locally. when I am executing it I
> am geting error such as:
> Response code: Non HTTP response cod
Hi Team,
I want to use the Access log sampler in my test plan to access the logs of my
server which is tomcat and is configured locally. when I am executing it I am
geting error such as:
Response code: Non HTTP response code: java.lang.Error
Response message: Non HTTP response message: Problem
hi Gurus,
I want to simulate traffic on my server based upon access logs.I tired this
but Jmeter is using the URI is the access logs based upon the number of
threads I give.Is there a way in jmeter to execute all the URIs in access
logs
Thanks,
Siva
;[EMAIL PROTECTED]>
> Subject: Re: Access Log Sampler
> To: "JMeter Users List"
> Date: Thursday, May 15, 2008, 7:20 AM
> as long as it follows normal get format
>
> param=value¶m2=value
>
>
>
> On Thu, May 15, 2008 at 8:17 AM, sebb
> <[EMAIL PROTECTED]&
as long as it follows normal get format
param=value¶m2=value
On Thu, May 15, 2008 at 8:17 AM, sebb <[EMAIL PROTECTED]> wrote:
> I've just had a look at the code, and it does handle POST requests, so
> if the POSTs don't have bodies, the Access Log Sampler should wor
I've just had a look at the code, and it does handle POST requests, so
if the POSTs don't have bodies, the Access Log Sampler should work OK.
@Peter: what format do the request parameters have to be in for the
sampler to pick them up?
On 15/05/2008, Peter Lin <[EMAIL PROTECTED]&g
> On 14/05/2008, john wu <[EMAIL PROTECTED]> wrote:
>> Hi All,
>>
>> Does Access Log Sampler support POST request in the log file?
>
> No, because in general the access log does not contain all the
> information needed to recreate the request - for example as far a
On 14/05/2008, john wu <[EMAIL PROTECTED]> wrote:
> Hi All,
>
> Does Access Log Sampler support POST request in the log file?
No, because in general the access log does not contain all the
information needed to recreate the request - for example as far as I
know the access log wil
Hi All,
Does Access Log Sampler support POST request in the log file? How to set it up?
In my log file, I have many POST request and send different parameters for each
post request, do I have to pass all these parameters in HTTP Request Default?
Thanks
On 17/03/2008, sebb <[EMAIL PROTECTED]> wrote:
> On 12/03/2008, Oren Benjamin <[EMAIL PROTECTED]> wrote:
> > I wrote: "Ignoring users for now, I'd like to divide all the requests among
> >
> > a fixed number of threads."
> >
> >
On 12/03/2008, Oren Benjamin <[EMAIL PROTECTED]> wrote:
> I wrote: "Ignoring users for now, I'd like to divide all the requests among
>
> a fixed number of threads."
>
>
> You replied: "That's how the current Access Log sampler works; when the ne
I wrote: "Ignoring users for now, I'd like to divide all the requests among
a fixed number of threads."
You replied: "That's how the current Access Log sampler works; when the next
sampler in a thread is executed it fetches the next line from the file. But
as
mentioned ab
On 03/03/2008, Oren Benjamin <[EMAIL PROTECTED]> wrote:
> Thanks for your response. Since, my first post, I've taken JMeter for a
> spin and was pleasantly surprised by how simple it was to set up a test plan
> with Access Log Sampler to play back all the requests in my lo
Thanks for your response. Since, my first post, I've taken JMeter for a
spin and was pleasantly surprised by how simple it was to set up a test plan
with Access Log Sampler to play back all the requests in my log.
I'm now ready to try and overcome the two hurdles we've discus
threads to simulate multiple
> users making the requests asynchronously.
>
> I'm looking into the use of JMeter for our purposes. From what I see it
> provides great reporting facilities, test abstractions, and a flexible
> architecture. The Access Log Sampler seems
JMeter for our purposes. From what I see it
provides great reporting facilities, test abstractions, and a flexible
architecture. The Access Log Sampler seems like the logical starting point,
but from reading the documentation and other threads on the mailing list, it
looks like we're going
in that case, if you get a rough approximation of the traffic pattern, you
should be able to run it multiple times and get comparable results.
peter
On Jan 4, 2008 11:13 AM, Christian Hufgard <[EMAIL PROTECTED]> wrote:
> > exactly as possible will never be exactly what happened in production.
>
> exactly as possible will never be exactly what happened in production. the
> best one can hope for is the same traffic loads and patterns.
Yes, I had to add some patterns and I hoped, I could do this easier with
this Sampler.
>>from your comments so far, it sounds like you want to reproduce a s
, that would work. But my task is to reproduce the load as exactly
> as possible. I thaught, the access log sampler could do this.
>
>
> Christian
>
> -
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
groups and have some thread groups
> set to a longer interval.
Well, that would work. But my task is to reproduce the load as exactly
as possible. I thaught, the access log sampler could do this.
Christian
-
To unsubscribe,
you can use multiple thread groups and control each one with a timer, though
the timing is probably going to vary depending on how fast the server
responds.
at best, jmeter will try to simulate peak load and lull load.
a simple way would be to create 10 thread groups and have some thread groups
s
> when I wrote the sampler, it was to run a large number of requests. In my
> case, I took a sample log of 50K and set jmeter to run for 1million
> iterations
Ah ok. My problem is some more weird. I have to simulate peaks with
response-times up to 30 seconds. Then some minutes with one or two
requ
if you want a delay between requests, add a timer.
when I wrote the sampler, it was to run a large number of requests. In my
case, I took a sample log of 50K and set jmeter to run for 1million
iterations
I added a timer to produce the desired concurrent requests per second.
peter
On Jan 4, 2008
> change the number of iterations to 1, if you just want it to read the first
> line.
I want the exact oposite. :)
If I increase the number of iterations, does the sampler take respect of
the delay between the single requests? And how does it handle concurrent
requests?
Christian
-
AIL PROTECTED]> wrote:
> Hi everyone,
>
> I am the new guy on this list. :)
>
> I just tried to set up and use the access log sampler and cannot get it
> working. I followed this tutorial:
>
> http://jakarta.apache.org/jmeter/usermanual/jmeter_accesslog_sampler_step_by_s
Hi everyone,
I am the new guy on this list. :)
I just tried to set up and use the access log sampler and cannot get it
working. I followed this tutorial:
http://jakarta.apache.org/jmeter/usermanual/jmeter_accesslog_sampler_step_by_step.pdf
The behaviour I am expecting is, that the sampler
I'm using Access Log Sampler, and I don't think it can send POST
requests (it also can't tell from the log what arguments to send), so
using HTTP Request Defaults won't help.
-Original Message-
From: sebb [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 04, 2007 4:59
Have you tried Http Request Defaults?
On 04/07/07, Yuval Kantor <[EMAIL PROTECTED]> wrote:
Hello everybody,
I would like to test a site using the Access Log Sampler.
The problem is that about 5% of the HTTP requests are POST method.
The Access Log Sampler can't send those req
Hello everybody,
I would like to test a site using the Access Log Sampler.
The problem is that about 5% of the HTTP requests are POST method.
The Access Log Sampler can't send those requests since the POST
arguments are not saved in the access log.
I thought of sending default stubs
ttp:// included in the name..
> Removed http:// and only kept the host name, that removed the previous
> error :) Thanks!
>
> But now I have anothe question, how to I run through the entire log file?
> My current project structure only seem to run one query, I thought the
> Acces
only seem to run one query, I thought the Access
log sampler would iterate over the entire log?
On 30/03/06, Peter Lin <[EMAIL PROTECTED]> wrote:
>
> are you going to a proxy by any chance? the error shows it might be proxy
> related.
>
> peter
>
>
> On 3/30/06, Mika
are you going to a proxy by any chance? the error shows it might be proxy
related.
peter
On 3/30/06, Mikael Andersson <[EMAIL PROTECTED]> wrote:
>
> Hi
>
> I am encountering a problem when using Access log sampler with apache log
> files. I followed "Access log samp
Hi
I am encountering a problem when using Access log sampler with apache log
files. I followed "Access log sampler Step-by-step" turorial (
http://jakarta.apache.org/jmeter/usermanual/jmeter_accesslog_sampler_step_by_step.pdf),
but still can not get it to work.
Test Structure:
t the override
functions delay and duration ;) so that was not my problem.
have a nice day
Christian
-Ursprüngliche Nachricht-
Von: Peter Lin [mailto:[EMAIL PROTECTED]
Gesendet: Mittwoch, 24. August 2005 18:58
An: JMeter Users List
Betreff: Re: scheduled distributed testing and access log sa
hi,
> >
> > today I had to play around with distribute tests and wanted to use an access
> > log sampler for realistig usage simulation.
> > well, may i am right, that i have to have the access logs on each server in
> > the same directory where it is in the original t
time is correct. Also, make sure the
time is synchronized across the machines. if they are out of sync,
that may have a problem.
hope that helps
peter
On 8/24/05, Christian Baumgartner <[EMAIL PROTECTED]> wrote:
> hi,
>
> today I had to play around with distribute tests and wanted
hi,
today I had to play around with distribute tests and wanted to use an access
log sampler for realistig usage simulation.
well, may i am right, that i have to have the access logs on each server in
the same directory where it is in the original test plan? so i am not able
to have linux
49 matches
Mail list logo
