Thank you Robert, I worked out the problem.
Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 18/11/2014 19.49
A: "pino.stricc...@libero.it",
"jmol-users@lists.sourceforge.net"
Ogg: Re: [Jmol-users] lcaoCartoon
it's because the button uses the IS
In this page
http://pinostriccoli.altervista.org/?p=7500
i am trying to create hybrid sp3 with command
select (atomno=1);lcaoCartoon create 'sp3a'; and so on for the other three.
If i apply this command from consol of Jsmol it creates 4 surfaces all
appearing at same time.
When applied on butto
Bob, i updated the Jsmol to the version 14.3.7 and the installation works like
here http://pinostriccoli.altervista.org/html5/simple2.htm. It disappear all
when i run from my site. U can check any page http://pinostriccoli.altervista.
org/?p=4681
As if no files loaded in head section that is this
Hi .. I am trying to fix jsme with jsmol in the folloqing page
http://pinostriccoli.altervista.org/?page_id=7078
When i switch to 2d, JSME, it fails to load the applet.
The jsme works by itself at http://pinostriccoli.altervista.
org/html5/jsme/JSME.html
Any guess?
Pino
---
rvista.org/html5/jsmol.htm?_USE=HTML5
On Thu, Sep 18, 2014 at 2:08 PM, Angel Herráez wrote:
Pino, that URL loads without problem in my Firefox
Try clearing your cache
On 18 Sep 2014 at 20:14, pino.stricc...@libero.it wrote:
> i am aalways having a bloank page http://pinostriccoli.alter
Bob, i am having some problems on loading jsmol. I downloaded the version
present on sourceforge.
i am aalways having a bloank page http://pinostriccoli.altervista.
org/html5/jsmol.htm?_USE=HTML5
I was trying to apgrade the jsmol version.
This will be wher my blog will point
Pino
-
Ok Bob, i will try the upload of new version and I will let u know:)
Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 15/09/2014 21.29
A: "jmol-users@lists.sourceforge.net"
Ogg: Re: [Jmol-users] R: Re: R: Re: R: Re: Save problems
I think the main thing may be that you are us
or issue and what i
need to overcome it eventually.
Thanks a lot Angel.
BTW: why do i receive 2 messages from you and Bob? For the page bloked is a
advertisement. I will take out soon
Pino
>Messaggio originale
>Da: angel.herr...@uah.es
>Data: 15/09/2014 15.42
>A:
>Da: angel.herr...@uah.es
>Data: 13/09/2014 12.39
>A: "pino.stricc...@libero.it",
>Ogg: Re: [Jmol-users] R: Re: R: Re: Save problems
>
>Ciao Pino
>
>Can you provide your url? I can test
>
>My past experience, using "write ?", is that after asking fo
Bob, it is not working. It asks if the name is ok but it doesnt open a new
dialog box and it doesnt save. I dont remember if it used to work before .
Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 10/09/2014 13.21
A: "pino.stricc...@libero.it",
&
path inside the
info in the header.
Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 09/09/2014 19.59
A: "pino.stricc...@libero.it",
"jmol-users@lists.sourceforge.net"
Ogg: Re: [Jmol-users] Save problems
It will save the file in your downloads fold
Dear Friends, after long time i am working again on my site since the school
has started again in Italy. And working on JSmol is always a big work for me.
I have a little problem with the option of save file.
I have seen that i cannot save the file on my disk because i dont receive any
option o
Nick, i just tried from my macbookpro with firefox on maverick and it works
fine. I dont receive any error
Pino
Messaggio originale
Da: ngree...@liverpool.ac.uk
Data: 30/07/2014 18.06
A: ""
Ogg: [Jmol-users] Uncaught SecurityError: Blocked a frame with origin
"http://chemapp
Jim, i just changed theme and the plugin works. Nice that u removed the data
directory. Where to put the molecules stored locally?Pino
Messaggio originale
Da: jim.hu.bio...@gmail.com
Data: 12/06/2014 10.57
A:
Ogg: [Jmol-users] JSmol2wp version 0.8 beta
I just pushed a new version
Jim, i uploaded the files and activated the plugin in wordpress installation. I
wrote this post with this code [jsmol pdb='1crn' caption='caption' commands
='']
But nothing happens http://molecolevive.altervista.org/blog/trial-for-
jsmol-plugin/
What have i done wrong?
Pino
>Messaggio o
Jim i tried to upload the plug in into my plugins and it takes too long to
upload. Maybe in a next generation of plugin u can allow a separate download of
JSmol files and wordpress files. My installation asked me if it was really
necessary to continue. I will try again anyway
Pino
Messaggi
Jim, i want to load this plugin and try it. Do i need any file loaded previuos
to this plugin or is the plugin to do all the work? Pino
Messaggio originale
Da: jim.hu.bio...@gmail.com
Data: 07/06/2014 18.31
A: "pino.stricc...@libero.it",
Ogg: Re: [Jmol-users] R: jsmol
That is great. My pages are not done using a plugin that is really the best
solution for wordpress because you dont have to transfer all the links and
sripts to the new template. Thanks Jim
Pino
Messaggio originale
Da: jim.hu.bio...@gmail.com
Data: 06/06/2014 20.21
A:
Ogg: [Jmol-u
I forgot to add this url where to read
http://wiki.jmol.org/index.php/Jmol_in_Wikis_and_BlogsPino
Messaggio originale
Da: brentonhorn...@gmail.com
Data: 16/05/2014 14.42
A:
Ogg: [Jmol-users] Apology, and request for help
Hi people
I'd like to apologise for how much of a prick I c
Brenton, i run pinostriccoli.altervista.org and it is a worpress blog. Which
platform are you using? What is your URL so i can be of any use?Pino
Messaggio originale
Da: brentonhorn...@gmail.com
Data: 16/05/2014 14.42
A:
Ogg: [Jmol-users] Apology, and request for help
Hi people
I
Pat, from my limited experience, i woul d saggest you to take the chance now to
upload ur files on servers and moving to JSmol. Let it go Java that will still
be giving troubles all the way. The update to JSmol should not be taht bad as u
can imagine.
Pino
>Messaggio originale
>Da: car
Pierluigi, i use JSmol in wordpress installation. have a look at wiki of JSmol
for what i wrote for wordpress. It should not be that much different.
Pino
>Messaggio originale
>Da: pierluigi.quaglio...@unito.it
>Data: 13/03/2014 23.00
>A:
>Ogg: [Jmol-users] can JSMOL be used into the Joom
bob, i remember having troubles with sdf files, but not all sdf files. i ll let
u know soonpino
Messaggio originale
Da: hans...@stolaf.edu
Data: 07/03/2014 18.42
A: "jmol-users@lists.sourceforge.net"
Ogg: [Jmol-users] Problem with Firefox and PubChem download
I could swear this wa
Bob, maybe it is the best choice to install a XAMP (apace, php, mysql and perl)
on localhost and put java applet into localhost together with jsmol. It should
be a nice installation as far as i remeber and probably it helps saving timePino
Messaggio originale
Da: hans...@stolaf.edu
Da
Bob, I want to add to my blog the page
(http://chemapps.stolaf.edu/jmol/jsmol/jsv_predict.htm) where you can predict
CNMR spectrum from a JMSE designed molecule, quoting everything possible. Is it
possible? Any problem or requirment? Is there any similar page for IR spectra ?
Pino
--
Can anybody explain to me this error i find on this page http://pinostriccoli.
altervista.org/?p=5589?
On firefox (windows or linux) it works ok. In Chrome (windows or Linux) gives
me unrecognised format error.
What happens? any idea?
Pino
---
Here i have java 1.7.045. Everything works fine, with just one message
displaying the author. When reloading i receive no new warning message.
Just one question: if i swithc to JSmol, it doesn't load any molecule nor it
loads a molecul with direct call to database or any search
Pino
-
Here it works in JSmol and JAVA
Pino
>Messaggio originale
>Da: pb...@saintmarys.edu
>Data: 15/11/2013 22.22
>A: "Jmol Jmol"
>Ogg: [Jmol-users] Odd observation
>
>I am beginning to look at converting my web tutorials from jmol to jsmol. So
I went back to look at the SuperSimple JSMol exam
Bob, how do u implement these command inJSmol?
Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 13/11/2013 18.21
A: "jmol-users@lists.sourceforge.net"
Ogg: Re: [Jmol-users] connect with multiple models
Right, no bonds between models. Easiest thing to do is use
load file1
Hi Friends. I want to show different atomic orbitals that are aalready in my
model. Which commands allow me to do that since with the simple mo n i can show
just one orbital at time?
Pino
--
November Webinars for C, C+
Thanks anywayPino
Messaggio originale
Da: hans...@stolaf.edu
Data: 31/10/2013 20.33
A: "pino.stricc...@libero.it",
"jmol-users@lists.sourceforge.net"
Ogg: Re: [Jmol-users] Problem in jsmetest
I think it is there, but it is somewhere hidden on the page. It has somet
Hi friends, i tried to implement the jsmetest.html on Bob site into my blog
here http://pinostriccoli.altervista.org/?page_id=7078
Actually i am having the problem that after building my molecule and displayin
in 3D, the browser on going back to 2D stops somewhere in the middle of code.
The appl
Angel, i put on my blog the version that Bob has to combine JME and JSmol
without much transfer. It seems working better
Pino
>Messaggio originale
>Da: angel.herr...@uah.es
>Data: 29/10/2013 18.08
>A:
>Ogg: Re: [Jmol-users] R: Re: Parsing JME string
>
>Thanks for the feedback, Pino
>
>T
Angel i tried your page with a molecule with 3 carbons chain and two phenil
attached ... in mol is very fast. In JME esport is much slower
Pino
>Messaggio originale
>Da: angel.herr...@uah.es
>Data: 29/10/2013 10.35
>A:
>Ogg: Re: [Jmol-users] Parsing JME string
>
>Hello Wenhan Chen
>
>May
Ciao Angel. I updated the code JSmol in Wiki. Let me know if it is clear or
anything missing
Pino
>Messaggio originale
>Da: angel.herr...@uah.es
>Data: 10/10/2013 21.06
>A:
>Ogg: Re: [Jmol-users] Using jsmol in MediaWikis
>
>OK, I've prepared the existing page in Jmol Wiki
>http://wiki.j
Hi Angel. I Will try to do it as soon as possible. Sorry for delay. Busy in
updating blog to JSmol
Pino
>Messaggio originale
>Da: angel.herr...@uah.es
>Data: 10/10/2013 21.06
>A:
>Ogg: Re: [Jmol-users] Using jsmol in MediaWikis
>
>OK, I've prepared the existing page in Jmol Wiki
>http:/
klaus consider switching to JSmol instea, based o jmol, javascript and html5.
java is too much of trouble now. and if u must migrate jsmol is simply
great.http://pinostriccoli.altervista.orgpino
Messaggio originale
Da: k.kuln...@datamed.at
Data: 08/10/2013 14.24
A: "jmol-users@list
Thanks Angel and Otis. The fact that one file works and the other one no
probably points to an error in downloading. The broken file anyways is seen in
Jmol. Thanks again Pino
Messaggio originale
Da: angel.herr...@uah.es
Data: 06/10/2013 12.56
A:
Ogg: Re: [Jmol-users] R: Re: file
: "pino.stricc...@libero.it",
Ogg: Re: [Jmol-users] file format
Pino,
Can you point me to the url of a file that does not load? I'd like to try to
load it on my end.
Otis
--
Otis Rothenberger
o...@chemagic.com
http://chemagic.com
On Oct 5, 2013, at 6:35 AM, pino.stri
otis, i will put the file in a separated page if i didnt delete it.
pino
Messaggio originale
Da: osrot...@chemagic.com
Data: 05/10/2013 14.49
A: "pino.stricc...@libero.it",
Ogg: Re: [Jmol-users] file format
Pino,
Can you point me to the url of a file that does not
locally and
always with firefox. I rarely use google chrome and never MSIE.Actually i am
using 13.2.4, and just JSMol. I dont remember having problem in Jmol.Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 04/10/2013 20.20
A: "pino.stricc...@libero.it",
&
Hi Friends. While updating my site to JSmol, i have come across some errors in
loading the files. For example files with SDF extension are loaded perfectly in
JSmol, some other files no giving messages of error, or format unrecognized.
The origins of files are presumebley the same. In Jmol no pr
applet itself.
Thanks a lot Pino
>Messaggio originale
>Da: angel.herr...@uah.es
>Data: 28/09/2013 10.45
>A: "pino.stricc...@libero.it",
>Ogg: Re: [Jmol-users] width 100%
>
>Ciao Pino
>
>In your page
>http://pinostriccoli.altervista.org/?p=6434
>
Hi Friends, again here with formatting JSmol in wordpress. I have tried to find
my way with css, since i am a dumb with javascript in implementing the Jmol.
setAppletCss. I am trying a different way. And here comes one question:
width=100% that comes out when JSmol appears and that refers to div
Angel, i suppose, that since i have use html code to put the applet java in a
page, i cannot use JSmol2.js to convert the page into JSmol.
JSmol converts the jsavascript code of course.
Pino
--
October Webinars: Code for
Ok Bob. I just messed up the initial script. Thanks Pino
--Messaggio originale
Da: hans...@stolaf.edu
Data: 17/09/2013 23.05
A: "pino.stricc...@libero.it",
"jmol-users@lists.sourceforge.net"
Ogg: Re: [Jmol-users] error in loading the applet in JSmol
files are mi
Hi Friends, while doing some trials with formatting to float left the applet
in JSmol i run into this error when starting the JSmol.
Jmol._Canvas2D (JSmol) "jmolApplet0"[x]
call loadScript core\package.js
call loadScript core\package.js -- required by w3c script failed
What has Happene
.
Pino
>Messaggio originale
>Da: angel.herr...@uah.es
>Data: 17/09/2013 9.42
>A: "pino.stricc...@libero.it",
>Ogg: Re: [Jmol-users] (no subject)
>
>Ciao Pino
>
>http://wiki.jmol.org/index.php/Jmol_JavaScript_Object#Functions_that_s
>
Hi Friends, i am trying to format the page http://pinostriccoli.altervista.org/?
p=6434
and i want the molecule floating to the left so that written text gos to its
right.
I found jmol.setAppletCss. Where should I insert the script and what can be
the exat sintax?
thanks
Pino
1.44
A: "pino.stricc...@libero.it",
"jmol-users@lists.sourceforge.net"
Ogg: Re: [Jmol-users] JSmol in wordpress
worked but took a long time to load with all the other stuff going on on that
page as well.
On Tue, Sep 10, 2013 at 4:29 PM, pino.stricc...@libero.it
Dear friends, finally i succeded to put JSmol inside Wordpress. It works. What
happened before, i dont know. It remain to be seen until what grade it
works.The url is this http://pinostriccoli.altervista.org/?p=6434
If you can check the page it would be nice ...Pino
-
"jmol-users@lists.sourceforge.net"
Cc: "pino.stricc...@libero.it"
Ogg: Re: [Jmol-users] R: Re: Old error Loadclazz is not defined
Pino, can you send a link to the page? Something is odd there. Also, I just
checked in fixes for Mac Safari and Chrome (I hope!), so perhaps
Ciao Angel, i did as u suggested me. Now JSmol is loaded but i receive message
of unrecognized file format for caffeine.mol and all other
files sometjing missing?
Pino
>Messaggio originale
>Da: angel.herr...@uah.es
>Data: 06/09/2013 1.10
>A: "pino.stricc...@libe
Thanks Angel. I remember having that error sometime ago.
Ok I will apply these changes and see what happens.
Pino
>Messaggio originale
>Da: angel.herr...@uah.es
>Data: 06/09/2013 1.10
>A: "pino.stricc...@libero.it",
>Ogg: Re: [Jmol-users] Old error Loadclazz is
Hi friends. I am back again on my JSmol.
http://molecolevive.altervista.org/jsmol/index.html
I receive an error message of loadclazz is not defined
Errore: ReferenceError: LoadClazz is not defined
File sorgente: http://molecolevive.altervista.org/jsmol/js/JSmol.js
Riga: 424
The header is this
thanks Rolf. I answered to angel's message. I try to change the js file
Pino
>Messaggio originale
>Da: rhue...@fli-leibniz.de
>Data: 27/08/2013 19.21
>A:
>Ogg: Re: [Jmol-users] (no subject)
>
>On 08/27/2013 06:56 PM, pino.stricc...@libero.it wrote:
>>
Thanks Angel, after sending the mail i got that i had to change the js
somewhere. The version i downloaded is 13.2.4
I will try the chnages and i will let u know. Thansks a lot
Pino
>Messaggio originale
>Da: angel.herr...@uah.es
>Data: 27/08/2013 19.39
>A: "pino.st
After a long break from JSmol, i decided to upload the last version of JSmol
and continue working on my pages, but i found some problems with these pages
http://pinostriccoli.altervista.org/html5/index.htmlwhen trying to load
molecoles in pdb. It seems loading just mol and xyz files.I have the e
Bob, do you think it is usefull to put some version number to the JSmol
releases?Just to avoid confusions for the people who download itPino
Messaggio originale
Da: hans...@stolaf.edu
Data: 16/03/2013 1.23
A: "jmol-users@lists.sourceforge.net", "Zhou
Renjian"
Ogg: [Jmol-users] one
Bob, from my experience, i need to have files and jsmol in same directory if it
is locally. And locally meaning without server apache installed. I can move
files out of directory of JSmol on the server, where i can store files inside
subdirectory of JSmol or different directory. Localhost should
to receive help, u better put on some server to access otherwise it becomes
difficult ... Pino
Messaggio originale
Da: simonesturni...@gmail.com
Data: 06/02/2013 14.25
A:
Ogg: Re: [Jmol-users] JMol applet stopped working on Opera...?
No, I'm sorry, it's a local file. It's stil
I tried the simple page you linked and on linux ubuntu 12.04 and firefox latet
version works fine. It can be a problem of Jva on ur PC maybePino
Messaggio originale
Da: ema...@microbio.umass.edu
Data: 31/01/2013 21.35
A:
Ogg: [Jmol-users] Windows: Java 7 very sluggish
I find th
big shot.
(Chemdoodle can work in wordpress but i find it quite slow). Maybe in a future
i will try againPino
Messaggio originale
Da: hans...@stolaf.edu
Data: 25/01/2013 15.03
A: "pino.stricc...@libero.it",
"jmol-users@lists.sourceforge.net"
Ogg: Re: [Jmol-users]
Thanks Bob. Is there any limitation for Jsmol to load a molecole from a
different path like a subdirectory or a different path on same server ?
Pino
>Messaggio originale
>Da: hans...@stolaf.edu
>Data: 24/01/2013 23.44
>A: "pino.stricc...@libero.it", "jmol-u
Is it still possible to create a Jsmol page locally, make the changes and then
upload it? With one of last version i downloaded i receive message error
"unrecognized file format". Pino
--
Master Visual Studio, SharePoint,
mol boxes should be working fine, right?
>
>On 19 Jan 2013 at 11:20, pino.stricc...@libero.it wrote:
>
>> Angelo, i tried today your pages but i find again java issues on
>> vulnerabilities. Quite annoying. JMol is not activated by default. Pino
>
>
>-
Angelo, i tried today your pages but i find again java issues on
vulnerabilities. Quite annoying. JMol is not activated by default. Pino
>Messaggio originale
>Da: angel.herr...@uah.es
>Data: 13/01/2013 21.27
>A:
>Ogg: [Jmol-users] JSmol-compatible new version to export an image from eith
Angel i am trying your new pages with Jsmol http://biomodel.uah.
es/en/noJava/model3/
All is ok with sugars, but when it comes to proteins windows start appearing
with different messages.
Something is not really right there
Pino
-
A not so nice discover. While opening the page http://chemapps.stolaf.
edu/jmol/jsmol/test2.htm, my browser tells me that the java applet was not
displayed due to a vulnerability in java.
I work actually on linux with the latest firefox available
Pino
13.08
>A: "pino.stricc...@libero.it",
>Ogg: Re: [Jmol-users] Java
>
>
>On 12 Jan 2013, at 11:58, pino.stricc...@libero.it wrote:
>
>> No problem with Java on lion here in Italy.
>> Pino
>>
>>> Messaggio originale
>>> Da: osr
No problem with Java on lion here in Italy.
Pino
>Messaggio originale
>Da: osrot...@chemagic.com
>Data: 12/01/2013 1.06
>A:
>Ogg: [Jmol-users] Java
>
>All,
>
>Is anyone else seeing that Java suddenly became disabled on Mac (Lion) about
5:00 PM - USA Eastern time?
>
>This seems to be rel
Bob, i am not receiving any mail from jmol group. Is it anything wrong or is
that no mail actually produced? Pino
--
Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS,
MVC, Windows 8 Apps, JavaScript and
On firefox under ubuntu12 all is working fine:)Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 10/12/2012 13.22
A: "jmol-users@lists.sourceforge.net"
Ogg: [Jmol-users] testing needed for xml loading
I'd appreciate people testing
http://chemapps.stolaf.edu/jmol/jsmol/test2.ht
>Da: angel.herr...@uah.es
>Data: 28/11/2012 19.20
>A: "pino.stricc...@libero.it",
>Ogg: Re: [Jmol-users] R: Re: R: JSmol -- Are we done?
>
>Pino,
>I suggest to first be sure that you clear your browser cache -- js
>files remain there and you might be seeing the
r.
This can be due to:
The page no longer exists.
On Tue, Nov 27, 2012 at 7:32 AM, Robert Hanson wrote:
It's just that
points to an HTML file, not that file.
On Tue, Nov 27, 2012 at 6:13 AM, pino.stricc...@l
I am doing the changes now. J2S directory must be a sub directory. OK I will
let u know if it worksPino
Messaggio originale
Da: jaime.prilu...@weizmann.ac.il
Data: 27/11/2012 13.41
A: "pino.stricc...@libero.it",
""
Ogg: Re: [Jmol-users] R: JSmol -- Are we
I tried to implement JSmol inside wordpress but untill now i have no results as
you can see in this address...
http://pinostriccoli.altervista.org/?page_id=5173Can anybody give me an idea of
what is happening?Maybe the implementation of JSmol in cms can be a good thing.
While Java has no proble
It works fine here on firefox/linux and firefox /mac.Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 26/11/2012 12.55
A: "jmol-users@lists.sourceforge.net"
Ogg: [Jmol-users] JSmol fixed
http://chemapps.stolaf.edu/jmol/jsmol.zip
http://chemapps.stolaf.edu/jmol/jsmol/test2.htm
I can see the message alert "firefox bug --continuing"Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 24/11/2012 19.32
A: "jmol-users@lists.sourceforge.net"
Ogg: Re: [Jmol-users] JSmol - three months in
http://chemapps.stolaf.edu/jmol/jsmol/test2.htm
and
http://chemapps.sto
Yes Bob. I fixed the problem since i updated the files. ThanksPino
Messaggio originale
Da: hans...@stolaf.edu
Data: 24/11/2012 19.28
A: "pino.stricc...@libero.it",
"jmol-users@lists.sourceforge.net"
Ogg: Re: [Jmol-users] R: Re: two JSmols in the page
(and not
Yes here too. Test3.htm works fine from fine, but locally it doesnt work. I
supposed i have old files. Is it calling a php script ? Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 24/11/2012 0.13
A: "jmol-users@lists.sourceforge.net"
Ogg: Re: [Jmol-users] two JSmols in the page
I have the same answer from firefox on mac.
Pino
>Messaggio originale
>Da: pb...@saintmarys.edu
>Data: 20/11/2012 21.00
>A: "Jmol Jmol"
>Ogg: [Jmol-users] Firefox 17
>
>Forefox 17 was released today. I downloaded to see if it will now run
JSMol. It will not. Get the following error
I built this page at this address
http://pinostriccoli.altervista.org/html5/html5.html. It seems that the file
ch3cl.smol is not loaded and in google chrome i have the issue file format non
recognized, while c6h6.smol is working. Did i misss anything?
I am on linux and firefox. On mac safari an
Thanks. My big mistake ... i dint load the js files... sorry :) thanks again. I
put the files and now it works
Pino
>Messaggio originale
>Da: rhue...@fli-leibniz.de
>Data: 16/11/2012 13.05
>A:
>Ogg: Re: [Jmol-users] My trial wit JSmol
>
>On 11/16/2012 12:40 PM, pin
I tried first locally to make a simple page in html5 and it works fine. When i
put it on my server the applet or the canvas doesn't come out. I put on server
the real same fileshttp://pinostriccoli.altervista.org/html5/html5.htmlI
receive 1 error message for javascript Jmol is not defined ... Lo
Finally i had time to try locally JSmol and i had troubles of cpu working at
100% probably because i was using too many windows with firebug acxtivated.
Linux 16.02 on linux here.Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 15/11/2012 17.25
A: "jmol-users@lists.sourceforge.n
When i click on the link i receive this alert message with this code and no
display at all. I have last firefox on linux ubuntu 12.04Pino:3554.666748046875
function (text, font3d, g3d) {
var pixels = g3d.apiPlatform.getTextPixels(text, font3d,
g3d.platform.getGraphicsForTextOrImage(this.mapW
Sure Bob, send me what you have and i try to experiment or at least try to
understand somethingPino
Messaggio originale
Da: hans...@stolaf.edu
Data: 29/10/2012 18.46
A: "pino.stricc...@libero.it",
Ogg: Re: [Jmol-users] R: JSmol nearly fully functional
Yes, but not f
Bob, dou think you will make a version to download just for HTML 5? Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 29/10/2012 0.10
A:
Ogg: [Jmol-users] JSmol nearly fully functional
Update on JavaScript and Jmol:
JavaScript/HTML5-only Jmol ("JSmol") is now nearly fully fu
Thanks Angel. I will wait for downladable files. But doing without java for
simple use is something good:)
Pino
>Messaggio originale
>Da: angel.herr...@uah.es
>Data: 28/10/2012 21.42
>A:
>Ogg: Re: [Jmol-users] R: Re: HTML5 code
>
>> Is there any cance to use jsut HTML5 so that, at leas
Ok Angel i get now. Thanks. Is there any cance to use jsut HTML5 so that, at
least for simpler purposes, no java is used? My plan is to pass it to wordpress
that is my platformPino
Messaggio originale
Da: angel.herr...@uah.es
Data: 28/10/2012 18.08
A: "pino.stricc...@libe
I tried the page http://chemapps.stolaf.edu/jmol/jsmol/test2.htm. It displays
jsmol even if java is enabled on my pc (Ubuntu 12.04LTS, FIrefox 16, java 7).
Can anybody tell me what to do for using just HTML5 ? pino
--
WI
Thanks Bob for the input. I still to have to change JME applet but now it works
fine with JME format. Pino
Messaggio originale
Da: hans...@stolaf.edu
Data: 21/09/2012 15.51
A: "pino.stricc...@libero.it",
Ogg: Re: [Jmol-users] (no subject)
This worked:
jmolLoadIn
Hi Bob and Angel. Sorry for my late answer and thanks for your great support
first.
First i will update the JME applet and switch to JME format. my only purpose
is for teaching and usefulness of the applet in class. Angel, by the way from
the page u send me i can see that both work fine with cy
Hi everybody. I have a simple issue. A mistake in rendering cicloexane ring
from JME to Jmol. At my page http://pinostriccoli.altervista.org/?page_id=873,
it is sure the error. I remember being an old issue with Jmol. It appears in
Jmol13, and i checked again on http://biomodel.uah.es/en/DIY/JME
I have Ubuntu and Java installed and no crash with firefox. Just get rid of
icedtea plugin and openJDK and install normal Java. Icedtea is not working
well. On the web u should find what to do. I used an italian site to fix java
properly. I dont know in english
Pino
>Messaggio originale--
Ciao. I started lately to use Ubuntu and had problem with icedtea plugin. I
unistalled what of java comes with ubuntu and installed the java from
java.com. Then it works fine. No problem until now.Pino
Messaggio originale
Da: gu...@uwosh.edu
Data: 23/03/2012 23.46
A:
Ogg: [Jmol-us
Hi, i am trying to implement in my blog (http://pinostriccoli.altervista.org)
JME TO JMOL (or JChempaint as in
http://biomodel.uah.es/en/DIY/JChemPaint3/draw.en.htm), so that the two applets
will be displayed in just one window. At the moment there is a link to
Molinspiration that i would like
I see two empty messages
Pino
>Messaggio originale
>Da:
jhjen...@kemi.ku.dk
>Data: 16/11/2009 20.44
>A: "pino.stricc...@libero.it",
>Ogg: Re: [Jmol-users]
Jmol in blogsite
>
>
>
>
>
--
Thanks for your quick answer. I inserted the jmol in my blog with wordpress as
you can check here.
http://pinostriccoli.altervista.org/?p=52
Apart from
Moodle is there any plugin, so as to easily build pages with jmol ?
other
chance is to do it manually
thanks anyway for your attention.
1 - 100 of 101 matches
Mail list logo