Re: [j-nsp] Problem with boot after JunOS upgrade (7.5 -> 8.1R3.3)

Alex, it did not help me: ok ls packages packages d mnt jbase.symlinks jbase-8.1R3.3 jbase-8.1R3.3.md5 jbase-8.1R3.3.sha1 l jbase l cleanup-pkgs ok boot packages/jkernel-8.1R3.3 can't find 'packages/jkernel-8.1R3.3' ok ls packages/jkernel-8.1R3.3 open 'packages/jkernel-8.1R3

Re: [j-nsp] Juniper Commit/Op Scripts and Archive

Hi. Richard, I have been using your scripts for a few weeks and can only thanks you for the work you done, the max-prefix auto-tuning is really nice. Regarding GTSM, low end Juniper do not have hardware accelerated ACL for the loopback interface which mean that the firewall statement must real

Re: [j-nsp] Problem with boot after JunOS upgrade (7.5 -> 8.1R3.3)

Yevgeniy, Try this: ok>ls packages ok>boot packages/jkernel-8.1R3.3 Rgds Alex - Original Message - From: "Yevgeniy Voloshin" <[EMAIL PROTECTED]> To: Sent: Friday, June 08, 2007 6:18 PM Subject: Re: [j-nsp] Problem with boot after JunOS upgrade (7.5 -> 8.1R3.3) > The same problem, but n

Re: [j-nsp] Problem with boot after JunOS upgrade (7.5 -> 8.1R3.3)

The same problem, but now m7i stop here: Award Modular BIOS v4.51PG, An Energy Star Ally Copyright (C) 1984-98, Award Software, Inc. BIOS Version 1.8 09/18/2003-i440BX-SMC67X-2A69TU00C-00 Will try to boot from : PCMCIA ATA Flash Card Compact Flash Primary IDE Hard Disk Ethernet Trying to Boot fr

[j-nsp] Juniper M10i MLPPP issue

Guys.Im trying to configure MLPPP link (over E1) between two Juniper M10is in my test lab...and want to discover the possible load (CPU and Memory) that can survive without any service intruption...but i got stuck in one place...i have M10is with AS PIC installed. The scenario is very simple..

[j-nsp] MPLS MTU Juniper vs. CISCO

Here i have some information on MTU Cisco vs Juniper, I had investigated it several months ago. 1) MTU - JUNIPER http://www.juniper.net/techpubs/software/junos/junos73/swconfig73-interfaces/html/interfaces-physical-config5.html

Re: [j-nsp] JunOS Litterature

Leigh Porter wrote: > Erwin D wrote: >> There are some guy that I know passing JNCIE, by using the junos manual and >> read from page 1 to finish while trying every command or feature there. >> >> >> thanks, >> >> ~Erwin >> > It also helps if you have a nice network to practice on.. ;-) > > Doe

Re: [j-nsp] Juniper Commit/Op Scripts and Archive

On the topic of LSP auto-mesh, we've been asking J for a while to implement automesh signalled via IGP, as described in ccamp-automesh-04.txt. Probably wouldn't hurt if other providers chimed in.. On Thu, 7 Jun 2007, Richard A Steenbergen wrote: > Ok, I've been saying I would do this for a