On 13/11/07 20:59 +0300, Alexandre Snarskii wrote:
Hi,
Simple shutting down pppoe interface (enforcing users to reconnect
to another bras after keepalive timeout) looks better - did it today
morning and got three calls to support from ~500 users disconnected.
Or have I missed something ?
Dear All.
We have configured E1 as the PRI interface for dial-in purpose of the ISDN
lines. But PPP is not up.
Following is the configuration, if you think any issue in the configuration.
Kindly guide.
version 8.3R1.5;
system {
root-authentication {
encrypted-password
Hello,
We are having a hw fan problem on a M20 router. This caused a crash of
the disks.
After rebooting the /var could not be mounted on ad1 disk. Only /tmp/var
is running the router now.
Could any suggest a solution to remount the /var on the ad1 again.
Thanks for your help
Best regards
it is only possible to do it on the linux?
from the nsm itself isnt that possible?
- Original Message -
From: Eugeniu Patrascu [EMAIL PROTECTED]
To: M.Mihailidis [EMAIL PROTECTED]
Cc: Juniper-Nsp juniper-nsp@puck.nether.net
Sent: Wednesday, November 14, 2007 4:37 PM
Subject: Re:
hi,
we use ERX1440/E320 to serve dynamic L2TP dial-up
service. When someone dial-up with some dial-up
accouting, Radius server will respond with l2tp server
ip and tunnel type to BRAS. Then BRAS set up l2tp
tunnel to LNS. (BRAS act as LAC)
We record these l2tp session in radius servers. But,
Thank you very much
- Original Message -
From: Eugeniu Patrascu [EMAIL PROTECTED]
To: M.Mihailidis [EMAIL PROTECTED]
Cc: Juniper-Nsp juniper-nsp@puck.nether.net
Sent: Wednesday, November 14, 2007 5:45 PM
Subject: Re: [j-nsp] Netscreen Remote Manager
M.Mihailidis wrote:
it is only
Hi Everyone,
I would like to know:
1) The difference between a route-target and vrf-target. what i know is that
for route target
we need to enable Border Gateway Protocol (BGP) route target filtering on the
Layer 3 VPN.
2) are these two statements used in place of each other or
Hamid,
1) The difference between a route-target and vrf-target. what i know is that
for route target
we need to enable Border Gateway Protocol (BGP) route target filtering on the
Layer 3 VPN.
sp
Route-target is another NLRI family based on the following draft:
8 matches
Mail list logo