On Tue, Jun 23, 2009 at 05:30:38PM -0700, Cord MacLeod wrote:
> I had this issue adding members to an existing VC. Did you upgrade all
> of the members to the same code? When I did, the issue was fixed.
You run VC with mis-matched code versions? You are braver than I! We
always run the same c
I had this issue adding members to an existing VC. Did you upgrade
all of the members to the same code? When I did, the issue was fixed.
On Jun 23, 2009, at 5:24 PM, Ross Vandegrift wrote:
Hey everyone,
We recently upgraded a fistful of EX-4200s to 9.3S1.6 and have
acquired a new issue.
Hey everyone,
We recently upgraded a fistful of EX-4200s to 9.3S1.6 and have
acquired a new issue. At a certain point, trying to commit will give
an error:
fpc3:
error: configuration database modified
fpc0:
error: remote lock-configuration failed on fpc3
Once this hits, you can't commit any cha
This thread made me curious, so I checked one of our M320s (on 8.3R3.4) and
came up with a very similar memory utilization.
You're using ~90% of 768MB - 691MB
We're using ~30% of 2048MB - 634MB
So it looks like the memory requirements are creeping up if you're holding a
full table (with its ow
Ok heres what i got..
@ibr1.ash> show system processes brief
last pid: 40751; load averages: 0.00, 0.00, 0.00 up 211+21:54:08
13:47:2
8
112 processes: 3 running, 92 sleeping, 17 waiting
Mem: 405M Active, 136M I
Brendan
You can try:
show system processes brief
to see how much memory is marked as inactive. The percentage calculation
considers inactive memory as used memory which strictly speaking is correct
(this is managed by the FreeBSD that JUNOS run on top of). However, inactive
memory will be fre
ibr1.ash> show route all
inet.0: 283638 destinations, 486468 routes (283619 active, 18 holddown, 2
hidden
)
ibr1.ash> show chassis routing-engine
Routing Engine status:
Temperature 30 degrees C / 86
Hello,
I have two M7i routers with RE-400-768s. One is running 9.1R1.8 and the
other 8.3R4.3.
They each have one transit link landed on them and very little IBGP/OSPF.
The router with 9.1 on it has 91% memory usage while the 8.3 has 59%.
Now I know the more recent code probably has more feature
8 matches
Mail list logo