Re: [j-nsp] VPLS Multi-homing primary site link failure failover

Hi Clarke .. what's the config ? Are you using irb interfaces ? If no irb, and the PE1 is directly connected to CE1, on interface down the VPLS primary should switchover. cheers Sean I have a VPLS multi-homed environment with two MX routers (PE1 and PE2) connected to a single ethernet switch

Re: [j-nsp] 答复: Juniper routers as NTP Ser ver

> > The juniper router can't be a NTP server in the network,the Juniper > website is show the truth. > It can be used ... but the pre-requisite is it needs to peer to a "real" NTP source .. it will then pass this info on as stratum value minus 1 ___

[j-nsp] Juniper routers as NTP Server

Is it possible to use Juniper router as NTP server for a network consisting of juniper devices only? If yes then how to configure... Regards Ashok Kumar ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/ju

[j-nsp] junos 10.0 / interface-range implementation

Just reading the release notes for 10.0 I found myself thinking "Yes! finally! An interface range command for the EXes!", only to learn that this is a strange mixture of a concept somewhere between apply-group & interface-set - it's NOT the simply yet incredibly effective cisco-style which would al