LinkedIn
Taqdir Singh pidió añadirte como contacto en LinkedIn:
--
Juniper,
I'd like to add you to my professional network on LinkedIn.
- Taqdir
Aceptar invitación de Taqdir Singh
http://www.linkedin.com/e/XqZSB0oknt5cTYQCxwU5LkoQzUifoQRJSaUSl
Just realized that you're using an M7i - this is not supported. The
other thing I can think of would be to configure a tos/dscp rewrite
rule on egress for that specific forwarding-class and loss-priority
high, and confirm the tos/dscp values on the tester.
--Addy.
On 3/13/10, meryem Z wrote:
>
Hello ,
There is no "loss-priority" criteria to match on it.
Possible completions are below:
Thanks.
# set firewall filter test_plp term 1 from ?
Possible completions:
> address Match IP source or destination address
+ ah-spi Match IPSec AH SPI value
+ ah-spi-excep
Hi Experts
I tried configuring QoS on logical routers on M7i router (JUNOS 9.2R3.5)
but it's not applicable, the problem I have faced is that the CoS can be
configured only on the physical router, then when assigning the CoS
components to the interfaces, it's not applicable as the interfaces ar
4 matches
Mail list logo