Hi all,
Does anybody have experienced ECMP LAGs. I mean, MX MPC only support 16 links
per LAG until the 12.2, so we need to split more than 16 links in 2 LAGs, and
each LAG will have the same cost. For exemple 2 LAGs with 10 links per LAG ?
Any experience, bug, limitation ???
Thanks
Regards
Hi Zaid,
Apparently I sent this answer only to Eric instead of the rest of the list.
--Stacy
-Original Message-
From: Stacy W. Smith [mailto:st...@acm.org]
Sent: Wednesday, June 29, 2011 12:32 PM
To: Eric Van Tol
Subject: Re: [j-nsp] L2VPN Active Route Selection
Eric,
FYI, I
Thanks Stacy!
On Thu, Nov 3, 2011 at 09:04, Stacy W. Smith st...@acm.org wrote:
Hi Zaid,
Apparently I sent this answer only to Eric instead of the rest of the list.
--Stacy
-Original Message-
From: Stacy W. Smith [mailto:st...@acm.org]
Sent: Wednesday, June 29, 2011 12:32 PM
Charlie Allom writes:
I've come across another performance issue - running through the jnxUtil
MIB - it drives the load up significantly:
show system processes extensive output while the script is running
would be helpful. The two key questions are is the script completing
before you launch the
Hey Folks,
Hoping for a little helpĀor confirmation of setup. I don't have time to lab
up and need to make sure the setup will do as I need it to.
The goal is to mirror traffic from a Brocade switch at one site over a layer
2 circuit back to another site. At each site, there is a Juniper router,
On 11/3/2011 1:45 PM, Terry Jones wrote:
Simple enough using a vlan-ccc. The problem is that I have to setup the
vlan-ccc over a GRE tunnel. Now the question I have is how to make it layer
2 to the GE interface? Since I can using a vlan-ccc, vlan-ccc and family
inet cannot be configured on the
On 11/3/2011 2:28 PM, Jack Bates wrote:
On 11/3/2011 1:45 PM, Terry Jones wrote:
Simple enough using a vlan-ccc. The problem is that I have to setup the
vlan-ccc over a GRE tunnel. Now the question I have is how to make it
layer
2 to the GE interface? Since I can using a vlan-ccc, vlan-ccc and
All,
While going through some old stuff I wrote I came across a looking
glass web based front end that I wrote for netscreens.
The idea was to mimic the great looking glass type apps that exist for
the routers for netscreen firewalls.
For those that don't know a looking glass app allows users
+1 GRE between loopbacks. Why not just use RSVP for labeling and do L2vpn
or pseudowire. Both work though.
2011/11/3 Jack Bates jba...@brightok.net
On 11/3/2011 1:45 PM, Terry Jones wrote:
Simple enough using a vlan-ccc. The problem is that I have to setup the
vlan-ccc over a GRE tunnel.
Hey Guys, thanks much for the suggestions. Based on your suggestions, I
think what I have will work, if not, I will go the with the RSVP. Hopefully
I can get it completed tomorrow. I'll post the working solution if I can get
it completed tomorrow. Else it will be after SC11 until I can complete
10 matches
Mail list logo