Confirmed as a bug. AE interfaces flap when master switch in VC reboots.
Fixed in 11.4r6 (not released yet) or 12.1
Luca
-Original Message-
From: Luca Salvatore
Sent: Thursday, 1 November 2012 12:51 PM
To: Luca Salvatore; Morgan McLean
Cc: juniper-nsp@puck.nether.net
Subject: RE:
I ve tried all of the recommended options provided but it did not work out,
...
if the VLAN ID are same on both Cisco and Juniper, traffic is passing
through but with different VLAN ID, traffic is not...
Steinar - when you said, pseudowire working fine between cisco and juniper,
did you
On (2012-11-02 11:04 +0530), Arun Kumar wrote:
Option 1:
encapsulation vlan-ccc;
vlan-id 601
input-vlan-map pop;
output-vlan-map push;
Shouldn't work. VXR side is VLAN mode, and will barf. Missing family 'ccc'.
Option 2:
encap vlan-ccc;
vlan-tags outer 601;
output-vlan-map
On 11/02/2012 02:21 AM, Luca Salvatore wrote:
Confirmed as a bug. AE interfaces flap when master switch in VC reboots.
Fixed in 11.4r6 (not released yet) or 12.1
Luca
Do you have the PR# by chance, or any info I can read up on at juniper.net?
___
We have a very odd problem that we've been dealing with for a couple of
weeks. JTAC is involved but we have not come to a resolution yet. The gist
of the problem is that we have two MX960s and we're running VRRP on
multiple interfaces with different Cisco switches in between each pair of
Juniper
We have a very odd problem that we've been dealing with for a couple of
weeks. JTAC is involved but we have not come to a resolution yet. The gist of
the problem is that we have two MX960s and we're running VRRP on
multiple interfaces with different Cisco switches in between each pair of
Well, that's fairly straightforward - either (1) VRRP on master [J] stopped
sending or (2) CSCO switches stopped forwarding VRRP hellos, or (3) backup
[J] drops incoming VRRP hellos.
You can verify (1) by using monitor traffic interface blah no-resolve
size .
(2) could be verified with
Hey everybody--
I got my hands on an EX-3200 PoE switch, and I don't need the PoE. Can I run
it with a 320W power, rather than the 740W (which I don't have).
I'm not seeing any errors. Does this just disable PoE, or am I looking at
other problems?
Thanks much.
--Dave Peters
does anyone know why this might be the case?
my lab box is running 11.4R2.14. when querying the subject oid i'm getting back:
JUNIPER-COS-MIB::jnxCosIfqIfIndex = No Such Object available on this
agent at this OID
my googles comes up blank. also tested against an mx80 running 11.2
with the same
Sorry for the lack of replies. I got swamped today and haven't had a chance
to look at this much. Another one of our engineers has been working it. I
did notice that the three interfaces I originally looked at back when this
started all seem to be fine now. However, this weird behavior seems to
Okay, I've been looking at this for a little bit and it's just really
bizarre. I was wrong about the connectivity earlier. It's really just a
single Cisco 4948 in the middle between these two MX960s. IGMP snooping is
not enabled, nor are there any inbound filters on the routers. I have
verified
Sorry for the barrage of emails, but I wanted to mention that we can ping
in both directions through the switch from one router interface to the
other, so we know broadcasts (ARP) and unicast work. How could the problem
be limited to only multicast if IGMP snooping is off? This is such a simple
On 03/11/2012, at 3:55 AM, Dave Peters - Terabit Systems
d...@terabitsystems.com wrote:
Hey everybody--
I got my hands on an EX-3200 PoE switch, and I don't need the PoE. Can I run
it with a 320W power, rather than the 740W (which I don't have).
I'm not seeing any errors. Does this
I was told PR/677087 but its currently marked as internal so not public
On 02/11/2012, at 11:24 PM, Billy Sneed bi...@middlebury.edu wrote:
On 11/02/2012 02:21 AM, Luca Salvatore wrote:
Confirmed as a bug. AE interfaces flap when master switch in VC reboots.
Fixed in 11.4r6 (not released
14 matches
Mail list logo