Re: [j-nsp] Sybex JNCIE-M Study Guide case study configuration files

2014-09-12 Thread Huan Pham
Hi group, There seems to be errors (files are not arranged in right chapter folders). Harry kindly sent me offline another version that he can find. I have a quick check and it looks better with this version. If you are interested, you can download it from the new link below: cd-files.zip https

Re: [j-nsp] Using Cisco SFP's on Juniper 4500's

2014-09-12 Thread Paulhamus, Jon
We've used a combination of Cisco, Juniper and Finisar SFP's with only one issue: Some Finisar 1Gb will also operate at 4Gb in the EX4500's as they support fiberchannel at 4Gb, and can't be "dialed-down". Depends on the model. Cisco's have been fine. -Original Message- From: Mark Ti

Re: [j-nsp] Inline jflow - No hash table changes

2014-09-12 Thread Scott Harvanek
We turned this up this morning with no service hits and flows are exporting correctly; - MX480 Virtual-Chassis - Enabled on member 1 / FPC 0 - Junos 14.1 :) Scott H. On 9/11/14, 7:00 PM, Hugo Slabbert wrote: Forgot to note: we were running 11.4R7.5 on both that MX480 and MX5, in case that's

Re: [j-nsp] Using Cisco SFP's on Juniper 4500's

2014-09-12 Thread Jared Mauch
On Fri, Sep 12, 2014 at 03:57:14AM -0400, youza fuuccingbitth wrote: > Hello, > > We are short juniper copper SFP, but have an excess of Cisco copper SFP's. > Is it possible to use Cisco copper SFP's on Juniper ? A colleague said the > Cisco will work but always show up/up even if nothing is conne

Re: [j-nsp] Using Cisco SFP's on Juniper 4500's

2014-09-12 Thread Mark Tinka
On Friday, September 12, 2014 03:53:32 PM Chris Gotzmann wrote: > Mark, > That makes no sense logically. Clients would be able to > connect 100% or 0%, there wouldn't be an in-between > based on the vendor gbic. So to give more detail, a laptop and Cisco switch connect fine. But a Tejas SDH bo

Re: [j-nsp] Using Cisco SFP's on Juniper 4500's

2014-09-12 Thread Doug McIntyre
On Fri, Sep 12, 2014 at 03:57:14AM -0400, youza fuuccingbitth wrote: > We are short juniper copper SFP, but have an excess of Cisco copper SFP's. > Is it possible to use Cisco copper SFP's on Juniper ? A colleague said the > Cisco will work but always show up/up even if nothing is connected. Has >

Re: [j-nsp] Using Cisco SFP's on Juniper 4500's

2014-09-12 Thread Mark Tinka
On Friday, September 12, 2014 09:57:14 AM youza fuuccingbitth wrote: > We are short juniper copper SFP, but have an excess of > Cisco copper SFP's. Is it possible to use Cisco copper > SFP's on Juniper ? A colleague said the Cisco will work > but always show up/up even if nothing is connected. Ha

[j-nsp] Using Cisco SFP's on Juniper 4500's

2014-09-12 Thread youza fuuccingbitth
Hello, We are short juniper copper SFP, but have an excess of Cisco copper SFP's. Is it possible to use Cisco copper SFP's on Juniper ? A colleague said the Cisco will work but always show up/up even if nothing is connected. Has anyone use Cisco copper SFP's on juniper and what was the result? Th