On 19/Mar/15 15:17, Scott Granados wrote:
Ok, I’m running 13.2X51-D26.2 now and can’t find out much about this code other
than that’s what was installed when they shipped the units.
I’m thinking going to the recommended version makes the most sense. Thank you
and the others who have respond
Yep, quite useless unless all your interfaces are straight up L3 (in
which case, you can get away with running it on 0).
Wonder if Juniper even plan on fixing this nonsense at all.
On 3/20/2015 午前 04:09, Mike Gonnason wrote:
I also cannot do sflow on non zero irb interfaces:
coresw1# commit c
I also cannot do sflow on non zero irb interfaces:
coresw1# commit check
[edit protocols sflow]
'interfaces irb.12'
sFlow can only be run on .0 interfaces
error: configuration check-out failed
Mike Gonnason
On Thu, Mar 19, 2015 at 12:06 PM, Mike Gonnason wrote:
> Paul,
>
> I am gettin
Paul,
I am getting the same thing as you.
coresw1# show interfaces ge-1/0/30
vlan-tagging;
unit 10 {
vlan-id 10;
family inet {
address 172.16.10.1/24;
}
}
unit 20 {
vlan-id 20;
family inet {
address 172.16.20.1/24;
}
}
coresw1# show | compare
[edit proto
Hi Paul,
I am just setting up a pair of EX4300 in a VC on 13.2X51-D30.4. Let me
attempt the config and see what happens.
Mike Gonnason
On Thu, Mar 19, 2015 at 6:47 AM, Paul S. wrote:
> Nobody ran into this one?
>
> Weird.
>
>
> On 3/16/2015 午後 10:40, Paul S. wrote:
>
>> Hi,
>>
>> In the past,
On 2015-03-18 18:00, Phil Shafer wrote:
Yup, apply-macro is the perfect spot for stuffing data. Consider using
a top-level apply-macro with a name indicating your script, and then
the value under it:
Great, that's exactly what I wanted. Thanks!
Ross
__
Nobody ran into this one?
Weird.
On 3/16/2015 午後 10:40, Paul S. wrote:
Hi,
In the past, I used to deploy similar configs on non-ELS switches, and
they mostly worked just fine with sflow.
sw# show interfaces xe-0/2/0
ether-options {
802.3ad ae1;
}
{master:0}[edit]
sw# show interfaces ae
12.3r6.6 has been good for me
Wayne
On 19 March 2015 at 13:28, Raphael Mazelier wrote:
>
>
> Hi,
>>
>> Currently running 12.3R7.7 with no apparent trouble.
>>
>> Previous versions were exhibiting memory leaks.
>>
>>
> I'm running dozen of EX4550 VC with 12.3R7.7.
> Running fine.
> I've teste
Hi,
Currently running 12.3R7.7 with no apparent trouble.
Previous versions were exhibiting memory leaks.
I'm running dozen of EX4550 VC with 12.3R7.7.
Running fine.
I've tested 13.2X50, and I'm faced strange routing problem, so I'm stick
with the 12.3 train.
Regards,
--
Raphael Mazelie
I’ve honestly never seen NSSU or NSSD work and while I was working at Juniper
they told us not to use it for the specific customer we were working with but
that may have changed over the last year or so. I was just going to use the
request system software add junos-a.b.c.d validate all members
On 19/03/2015 13:57, Scott Granados wrote:
If I want to downgrade from 13.2 to 12.3R8 or R7.7 are there any special steps
and or a document I should follow for this procedure or do I use the standard
method? I did some googling and didn’t find anything that applied or a KB
article dealing wit
Ok, I’m running 13.2X51-D26.2 now and can’t find out much about this code other
than that’s what was installed when they shipped the units.
I’m thinking going to the recommended version makes the most sense. Thank you
and the others who have responded, most helpful.
On Mar 19, 2015, at 9:09 AM
* Scott Granados
> Hi, I’m wondering what people recommend for a software release for
> the EX 4500 switch in a virtual chassis configuration. I noted that
> there is 13.2 code installed in my cluster now but the recommended
> version on the web site is 12.3R8 which obviously doesn’t match.
> Wh
On 19/Mar/15 14:57, Scott Granados wrote:
If I want to downgrade from 13.2 to 12.3R8 or R7.7 are there any special steps
and or a document I should follow for this procedure or do I use the standard
method? I did some googling and didn’t find anything that applied or a KB
article dealing wi
If I want to downgrade from 13.2 to 12.3R8 or R7.7 are there any special steps
and or a document I should follow for this procedure or do I use the standard
method? I did some googling and didn’t find anything that applied or a KB
article dealing with downgrading.
Thanks
Scott
On Mar 19, 201
On 19/Mar/15 14:40, Laurent CARON wrote:
Hi,
Currently running 12.3R7.7 with no apparent trouble.
Previous versions were exhibiting memory leaks.
We've also been on 12.3R7.7 since July last year.
It's rock solid, but we are seeing issues where SNMP has issues
processing queries. This is
On 18/03/2015 17:31, Scott Granados wrote:
Hi, I’m wondering what people recommend for a software release for the EX 4500
switch in a virtual chassis configuration. I noted that there is 13.2 code
installed in my cluster now but the recommended version on the web site is
12.3R8 which obviousl
17 matches
Mail list logo