As a follow-up to my own question; I suppose I should ask if it would be
expected for the MX240 with the original SBC and DPCE-R should be able
to do "wire rate" on a port at 68 byte packets at layer3?
On 10/28/2015 12:31 PM, Kevin Wormington wrote:
Hi,
I was playing around with a 10G test se
About the error below ..
root@eng-lab-ex4550-1# commit
[edit protocols]
'bgp'
warning: requires 'bgp' license
configuration check succeeds
commit complete
{master:0}[edit]
root@eng-lab-ex4550-1#
does this mean that mpls l3vpn's WILL NOT work without the bgp license ?
Hi,
I was playing around with a 10G test set and sending 68 byte packets at
layer3 to a 10G port on a DPCE-R-4XGE-XFP and I'm seeing receive FIFO
errors incrementing and packet loss above about 7.1gb. The docs says if
that counter is ever non-zero it could be a bad PIC but I've tried two
dif
Hi,
I am currently facing an issue on EX4300 switches; MVRP PDUs don't
include all active VLANs, only those configured on an access interface
or on a trunk with MVRP enabled. VLANs that are exclusively configured
on trunk interfaces with MVRP disabled are not sent to MVRP neighbours.
This behavio
4 matches
Mail list logo