Hi
I have a customer who will be testing some mirroring features. I provided them
with the steps to configure mirroring on an EX-4200 switch running 12.1, but
they are getting an error.
box# commit checkerror: Interface ge-0/0/46.0 has conflicting memberships
configured under interfaces stanza a
Hi
I have an ex switch which got corrupt due to abrupt power off and i tried to
recover it from USB flash drive.
Normally the switch would be showing "junos loader' on the switch when it is
corrupt.
The problem is now the switch is showing "u-loader" and when i reboot it, it
only shows around fi
led sanity
checks.
My Netscreen devices are able to sync with this NTP server.
Thanks
Abdullah Baheer
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
advertised.Hope this
helped.ThanksAbdullah Baheer
--- On Mon, 2/11/13, Ali Sumsam wrote:
From: Ali Sumsam
Subject: Re: [j-nsp] Redistribution question.
To: "Abdullah Baheer"
Cc: ""
Date: Monday, February 11, 2013, 3:30 PM
IC Abdullah,So either passive or learned via ISIS
Hi Ali,The interface routes of the router doing the redistribution will not be
advertised into ISIS if you don't specify "direct" in the policy.Or you can add
those interfaces to ISIS as passive.ThanksAbdullah Baheer
--- On Mon, 2/11/13, Ali Sumsam wrote:
From: Ali Sumsam
Subject: [j-nsp] Redi
Hi Osama,
Did you add a route for 192.168.120.10 pointing to the interface of the LAN
(10.10.1.10) on Site A?Route lookup is done before destination NAT in SSG...
Abdullah Baheer
--- On Mon, 12/17/12, mahmoud yasin wrote:
From: mahmoud yasin
Subject: Re: [j-nsp] vpn site to site with source
Sorry for the confusion, yeah RSVP/CCC... no LDP on EX, at least not in the
version that we were running (9.x)
--- On Thu, 9/27/12, Chris Kawchuk wrote:
From: Chris Kawchuk
Subject: Re: [j-nsp] Config help for basic MPLS setup
To: "Abdullah Baheer"
Cc: "Phil Mayers
Hi Experts,
We have two ex-4200 switches placed in two buildings, 400 to 500 meters
apart.The switches are connected through a Trunk interface (through a fiber
link and media-converters on both sides)
We are thinking of running VC between these switches.As per my understanding I
will need two up
Actually Chris, in my experience, i think you must have LDP to run LSP/CCC on
ex-4200, cough.. cough...
--- On Wed, 9/26/12, Chris Kawchuk wrote:
From: Chris Kawchuk
Subject: Re: [j-nsp] Config help for basic MPLS setup
To: "Phil Mayers"
Cc: juniper-nsp@puck.nether.net
Date: Wednesday, Septem
Hi,
About question No. 2, if you configure authentication order [tacplus password]
you will be authenticated locally if tacplus is reachable and doesn't
authenticate...in case you configure authentication order as [tacplus], you
will only be authenticated locally if the tacplus server is not rea
10 matches
Mail list logo