Re: [j-nsp] Number of PFE in MX DPC (DPCE-R-4XGE-XFP)

Yes you are right. regards abhijeet.c On Wednesday, April 8, 2015 1:18 PM, Sachin Rai sachinrai1...@hotmail.com wrote: Hi All, I need to configure a GRE tunnel on a 10 gig interface of DPC - DPCE-R-4XGE-XFP. As per juniper document Ethernet and tunnel interfaces cannot coexist

Re: [j-nsp] tfeb0 LUCHIP(0) PPE_15 Errors sync xtxn error

Are you using sampling in the device? Sent from Yahoo Mail on Android ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] Child process error message

on free bsd if i am correct then inetd should be responsible for invoking the icmp child task; looks something is wrong in the kernel. Any change you did on the device? You can try restarting inetd if it permits with root privilege.   regards abhijeet.c On Tuesday, July 15, 2014 7:40 PM,

Re: [j-nsp] MX80 stops forwarding after enabling inline flow sampling

More on this i think it important as many folks may run into this. this PR only address the current limitation in sampled and rpd communication by the workaround mentioned PR but it does not address the limitation of reading from file itself which causes sampled to slow down in first place.

Re: [j-nsp] RSVP Prefrence Query

LSP (the one, created by the built-in auto-mesh functionality). You can do a simple lab experiment to see how that secondary preference influences route selection. With best regards, Vladimir Blazhkun. On Mon, Jul 14, 2014 at 8:33 AM, Abhi vyaaghrah-...@yahoo.com wrote: hi vladimir So

Re: [j-nsp] RSVP Prefrence Query

, Vladimir Blazhkun. On Mon, Jul 7, 2014 at 4:47 PM, Abhi vyaaghrah-...@yahoo.com wrote:   i have a doubt about rsvp preference in Junos. The preference value is associated with /1 or /2 what these value denote? ___ juniper-nsp mailing list juniper-nsp

[j-nsp] RSVP Prefrence Query

hi everybody i have a doubt about rsvp preference in Junos. The preference value is associated with /1 or /2 what these value denote? inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both   200.255.255.9/32   *[RSVP/7/1] 00:00:02, metric

[j-nsp] Test Mail

Is anyone receiving the mail i sent to the list?   regards abhijeet.c ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] MX480 RE-S-2000 IGMP flood

can u check the link below http://www.juniper.net/techpubs/en_US/junos13.2/topics/task/configuration/subscriber-management-ddos-packet.html   regards abhijeet.c On Thursday, January 30, 2014 2:57 PM, Misak Khachatryan m.khachatr...@gnc.am wrote: Hello, I met very ugly problem yesterday.

Re: [j-nsp] MX RE how fast is slow

Hi saku Not to sure but I understand that ppc support would be part of free bsd kernel so would that require change to the process running on the top of them; if yes what kind of changes these would be? Sent from Yahoo! Mail on Android ___

Re: [j-nsp] Juniper QinQ problem

Hi Steinar I dont understand the differnce between Chassis wide VLAN and probably line card based Vlan. Can you help me understand the same. thanls   Regards Abhijeet.C From: sth...@nethelp.no sth...@nethelp.no To: jstuxuhu0...@gmail.com Cc:

Re: [j-nsp] Juniper QinQ problem

Hi Guys thanks i get that.   Regards Abhijeet.C From: Mark Tinka mti...@globaltransit.net To: juniper-nsp@puck.nether.net Cc: sth...@nethelp.no; vyaaghrah-...@yahoo.com Sent: Wednesday, August 31, 2011 8:24 PM Subject: Re: [j-nsp] Juniper QinQ problem On

Re: [j-nsp] BGP MTU Mismatch

Hi Keegan how did u solve the problem of bgp flap in first place.   Regards Abhijeet.C - Original Message - From: Keegan Holley keegan.hol...@sungard.com To: juniper-nsp juniper-nsp@puck.nether.net Cc: Sent: Wednesday, June 22, 2011 2:08 PM Subject: [j-nsp] BGP MTU Mismatch Does

Re: [j-nsp] MX80 Opinions

that is right 64 bit Junos only supports more than 3 Gb RAM SMP support had to come from moving to newer free bsd version.   Regards Abhijeet.C - Original Message - From: Richard A Steenbergen r...@e-gerbil.net To: Doug Hanks dha...@juniper.net Cc: juniper-nsp@puck.nether.net

Re: [j-nsp] BGP MTU Mismatch

I think it is the underlying TCP which is causing the problem Sent from Yahoo! Mail on Android ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] Problem while try to upgrade from 9.4R2.9 to 11.1

U should do a step upgrade like 9.x - 10.x - 11.x Sent from Yahoo! Mail on Android ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] T Series RE-1300 CompactFlash Card upgrade

Or from shell u can try sysctl -a ¦ grep bootdevs to check weather cf is in boot list Sent from Yahoo! Mail on Android ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] Qfabric

Now what i know about VDX it does not do single forwarding table lookup to decide the egress node. Regards Abhijeet.C From: Stefan Fouant sfou...@shortestpathfirst.net To: Chris Evans chrisccnpsp...@gmail.com; Keegan Holley keegan.hol...@sungard.com Cc: juniper-nsp

[j-nsp] Use of SSH Keygen - ssh-keygen -b 1024 -t rsa1

Hi everybody I see their is explicit option for generating ssh key(most of the platform do have), my question how do we use this option as even after generating key with various strength i found i received the same key each time since the first time sshed the box. How can i make junos

[j-nsp] BackUp Link also L3 VPN

Hi Everybody wanna discuss a scenario of using L3 VPN as Back Up with 2 different Service Providers. The question which i see as of now are 1) weather such a scenario would work ? ( my first thought suggest this should work) 2) the challenge on customer site is both SP are providing the

Re: [j-nsp] Screen OS OSPF Area 0

thanks Regards Abhijeet.C - Original Message From: Stefan Fouant sfou...@shortestpathfirst.net To: Abhi vyaaghrah-...@yahoo.com; Juniper Puck juniper-nsp@puck.nether.net Sent: Thu, March 11, 2010 10:38:19 PM Subject: RE: [j-nsp] Screen OS OSPF Area 0 -Original Message

[j-nsp] Screen OS OSPF Area 0

Hi everybody need to know weather their is way i can disable the default created OSPF area 0 on the screen OS ISG1000 firewall after the OSPF is enabled, as i need all the interfaces of the firewall in same area x to which it belongs. Also if i keep this area 0 as it is and dont assign any

Re: [j-nsp] J-Series JUNOS in Olive?

Yup even i tried installing J-Series Image could not do, but a jinstall worked fine on the Vmware environment. Regards Abhijeet.C - Original Message From: Patrik Olsson d...@webkom.se To: Steven Portobanco portoban...@hotmail.com Cc: juniper-nsp@puck.nether.net Sent: Sun, January

[j-nsp] Flow Based Router

Hi Guys while searching on the net for Flow Based router building limitation came across www.anagran.com who have built the first flow based router(or may be second after caspian). 1) Just want to know anybody has worked on this device and how effective it is. 2) Also are Juniper/Cisco plan

[j-nsp] Enabling IRB on Juniper EX Series Switches

Hi Does Junos support IRB Integrated routing and bridging(or a similar feature) on L3 interfaces and especially on EX8200 platform. and also how to enable the same. Thanks and Regards Abhijeet.C ___ juniper-nsp mailing list

[j-nsp] sshd Demon Error on Junos 9.3R1.7

Hi Guys while committing the configuration after enabling the ssh service i am getting the following error. r...@bom-sc20# commit synchronize re0: [edit system services ssh] 'ssh' warning: daemon binary /usr/sbin/sshd not found configuration check succeeds re1: [edit system services

Re: [j-nsp] sshd Demon Error on Junos 9.3R1.7

Yup on thing is sure I am running a Junos WW version. thanks Guys mas...@nexlinx.net.pk wrote: To use SSH on Juniper routers, you need to have JUNOS domestic release. To check this out you may execute the following command? show version OR more specific one :) (coz i love junos UNIX like

Re: [j-nsp] Router Reflector and L3 VPN support on same router

Hey Guys Thanks i tried i again after reading the config guides and i was able to do it. regards abhijeet.c - Original Message From: Richmond, Jeff [EMAIL PROTECTED] To: Abhi [EMAIL PROTECTED]; Juniper Puck juniper-nsp@puck.nether.net Sent: Friday, September 19, 2008 7:59:47 PM

Re: [j-nsp] Use of P router

Thanks guys for the inputs. regards abhijeet.c - Original Message From: Scott Morris [EMAIL PROTECTED] To: Abhi [EMAIL PROTECTED]; Juniper Puck juniper-nsp@puck.nether.net Sent: Thursday, September 18, 2008 4:36:28 PM Subject: RE: [j-nsp] Use of P router A 'P' router is simply

[j-nsp] Router Reflector and L3 VPN support on same router

Hi Every Body I am configuring Juniper router in a Lab Setup i am able to establish full mesh connectivity will configuring router to support L3 VPN functionality with other 3 router by explicitly configuring them. i tried configuring one of the Router to be RR and simultaneously be a peer

[j-nsp] Use of P router

Hi every body Had a query currently trying to set up a lab for customer to demonstrate various services which can be provided over MPLS environment. I have a question in a MPLS topology is it necessary to have a 'P' router for interconnecting 2 or more PE routers. This came my mind as i have

[j-nsp] Hardware Details on M/T Series

Hi All Is their any command similar to show tech on Junos platform which can collect all the software and hardware details on M/T Series Chassis. Thanks regards abhijeet.c ___ juniper-nsp mailing list juniper-nsp@puck.nether.net

Re: [j-nsp] Hardware Details on M/T Series

Thanks every body. regards abhijeet.c - Original Message From: Bjørn Mork [EMAIL PROTECTED] To: Abhi [EMAIL PROTECTED] Cc: Juniper Puck juniper-nsp@puck.nether.net Sent: Monday, September 1, 2008 3:52:08 PM Subject: Re: [j-nsp] Hardware Details on M/T Series Abhi [EMAIL PROTECTED

Re: [j-nsp] Hardware Details on M/T Series

Thanks every body. regards abhijeet.c - Original Message From: Bjørn Mork [EMAIL PROTECTED] To: Abhi [EMAIL PROTECTED] Cc: Juniper Puck juniper-nsp@puck.nether.net Sent: Monday, September 1, 2008 3:52:08 PM Subject: Re: [j-nsp] Hardware Details on M/T Series Abhi [EMAIL PROTECTED

[j-nsp] Difference Between E Series and Rest of the Router Family

Hi All I have a doubt what is difference from technical perspective between the E Series router family and rest of the routers. What are those unique feature that make them broadband friendly those are missing on the Junos family of devices. regards abhijeet.c

[j-nsp] Application of L2 VPN in Real World Scenario

Hi Everybody I have been the the JNCIS book and preparing for the exam to i came across the L2 VPNS section. Finding it difficult to identify the real world application of such L2 vpns using FR and ATM. Can anyone explain me where these are used and why. Thanks regards abhijeet.c

Re: [j-nsp] Application of L2 VPN in Real World Scenario

And how well do L2 VPN and L2 Ciruit scale up in the SP environment and which are more preferred ones for deploying these services. thanks regards abhijeet.c - Original Message From: Farhan Jaffer [EMAIL PROTECTED] To: Abhi [EMAIL PROTECTED] Cc: Juniper Puck juniper-nsp

[j-nsp] Fw: OSPF Adjeceny for Serial Interfaces

Hi Guys any idea on this. regards abhijeet.c - Forwarded Message From: Abhi [EMAIL PROTECTED] To: Juniper Puck juniper-nsp@puck.nether.net Sent: Thursday, June 19, 2008 5:38:18 PM Subject: [j-nsp] OSPF Adjeceny for Serial Interfaces Hi All Is their a method to force OSPF to form

[j-nsp] OSPF Adjeceny for Serial Interfaces

Hi All Is their a method to force OSPF to form adjacency on serial interfaces only using the IP Address assigned to the same rather than OSPF using unnumbered interface index number which is further advertised as stub on the network. regards abhijeet.c

[j-nsp] M 320 Password Recovery

Hi Any body know how to recover password on M320 chasis router Junos ver 8.5R3.4 regards abhijeet.c ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp