-Original Message-
From: juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Robert Hass
Sent: Friday, December 30, 2011 7:49 AM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] Suppress particular messages from syslog
Hi
Is any way to configure
Keith,
I have operated MX-480 networks installed with DPC's and within the last
year have deployed MX-480's with MPC's/MIC's and haven't experienced the
hardware issues you have run into. Based on my experiences with Juniper
hardware, I would say you've just had unfortunate luck.
Cheers,
Andy
I assume if it is in the logs as a trap, that a trap was indeed sent.
Since the trap should have originated from the RE, you should be able to
see it leave the router with 'monitor traffic interface interface' on
the interface that is the best route back to your NMS.
Cheers,
Andy
-Original
Serge,
I saw this same behavior in 10.2R3.10 but didn't open a JTAC case on it.
I haven't seen it since I moved to 10.2S6 but that doesn't mean it isn't
still present ;-)
My workaround for this was to edit the interface a time or two and
commit the changes, eventually the ifAlias would be
?
Cheers,
Andy Vance, IP Engineer
360networks
2101 4th Ave., Suite 2000
Seattle, WA 98121
253.307.7546 (c)
andy.va...@360networks.com
www.360networks.com
-Original Message-
From: juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Paul Stewart
Sent
is, and will not be used for forwarding.
I don't have a lab available to test quickly, I'm going from memory, I
could be wrong...
Andy
-Original Message-
From: Smith W. Stacy [mailto:st...@netfigure.com]
Sent: Wednesday, January 12, 2011 10:36 AM
To: Andy Vance
Cc: Paul Stewart; juniper-nsp
Is ok to disagree as your captures below prove your point and that you
are correct.
Apologies for the misinfo
Andy
-Original Message-
From: Smith W. Stacy [mailto:st...@acm.org]
Sent: Wednesday, January 12, 2011 12:02 PM
To: Andy Vance
Cc: Paul Stewart; juniper-nsp
Subject: Re: [j
We currently have all of our M20's on 8.5S4 and have had no issues whatsoever,
we upgraded from 7.5-daily. 8.5S4 is an extended release and if you're not
chasing features, I'd look into utilizing it.
Cheers,
Andy Vance
Sr. Network Engineer
Speakeasy
Direct 206.971.5144 . Fax 206.728.1500
Without config snapshots of the VRF, the import policy and the export policy,
it is difficult to say why you see this behavior, I have some ideas but I don't
want to guess. Can you provide config snapshots? I don't want to assume and
head down some road that may not be relevant.
Cheers,
Andy
;
}
term out {
from protocol [ direct static ];
then {
community add vpn-andy-router1;
accept;
}
}
term reject {
then reject;
Cheers,
Andy Vance
Sr. Network Engineer
Speakeasy
Direct 206.971.5144
Does anyone happen to have the 7.4R2.6 jinstall for the J-series laying around?
I need a copy and have yet to find one.
Cheers,
Andy Vance
Sr. Network Engineer
Speakeasy
Direct 206.971.5144 * Fax 206.728.1500
Email ava...@hq.speakeasy.netmailto:ava...@hq.speakeasy.net * Web
None that I'm aware of, can you shoot a show hard and a show ver from that
chassis with the card in? We have GE cards in slot 0 but I don't recall any
card type limitation.
Cheers,
Andy Vance
Sr. Network Engineer
Speakeasy
Direct 206.971.5144 * Fax 206.728.1500
Email ava
I've seen this in the past with media converters and was able to work around it
using
gigether-options {
no-auto-negotiation;
Hope that helps,
Andy
-Original Message-
From: juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Ozgur
13 matches
Mail list logo
