--- Begin Message ---
Hello,
Does anybody know if this card (MPC4E-3D-2CGE-8XGE) is compatible with
the SCBE-MX ?
This site says yes:
https://apps.juniper.net/hct/model/?component=MPC4E-3D-2CGE-8XGE=sComponents
Is anybody using these cards? We need 100G port on our MX480's but
it's so
Hello,
I am looking to implement shaping/rate limiting of common DDOS
reflection / amplification UDP traffic on our backbone ports.
if we have a 10G backbone link how would I go about rate-limiting say
udp/123 to maximum 5Gbps? Is anybody doing this already?
Hello,
We using the following hardware:
CHAS-BP-MX480-S
SCBE-MX-S
RE-S-1800X4-16G-S
MPC-3D-16XGE-SFPP
MX-MPC2E-3D
This router is carrying full IPv4 and IPv6 table with current routes
count at 846528 ipv4 and 128831 ipv6
Does anybody know maximum limit for those MPC cards, I read somewhere
it
Hello,
Our customer has own ASN from ARIN and want us to take care of all
routing. We already originate the customer prefix from our ASN. What
is easiest / recommended way to append customer's ASN to the prefixes
to make it appear as though it's originated from their ASN without any
routing
Hello,
We have some older EX4200 switch stacks still in production using
valuable public IPv4 /31's for their uplinks. We would like to
renumber those uplinks to RFC1918 but the issue is that these then
show up in traceroute/mtr towards anything routed behind the switches.
Is there a way to
Hello,
We're running a couple of MX960 in our datacenter, carrying a full
table in BGP and running full MPLS services, fast-reroute/RSVP/LDP
etc. There are two LSP's in full mesh with two other routers. (the
960's are not edge routers, so no peering/transit terminate on them).
Hardware as
On Tue, Apr 14, 2020 at 2:01 PM Martin Tonusoo wrote:
>
> Hi Dario,
>
> > This looks really useful, thanks for sharing. Just checking, do I only need
> > this script, InfluxDB and Grafana to get traffic graphs?
>
> That's correct.
Thanks - it's working nicely. So I can get the correct values in
On Mon, Apr 13, 2020 at 4:46 AM Aaron Gould wrote:
>
> You’re welcome Colton. I understand there are 2 different ways to do
> telemetry on Juniper. One called Native and the other called
> gRPC/openconfig. I’ve done the Native form. I think the native form is a
> configured form where by
On Tue, Apr 14, 2020 at 12:13 AM Martin Tonusoo wrote:
> > Telegraf has a built-in input plugin for Juniper Openconfig, so it takes
> > like 5 minutes to enable.
>
> there also seems to be a patch for native sensors:
> https://github.com/influxdata/telegraf/pull/6365. Unfortunately, it's not
>
Hello
We have the following hardware and we are looking to use this chassis
as an edge router, terminating 2x full table IP transit and some IXP
peering.
MX480
2x RE-S-2000-4096-S
2x SCB-MX960-S
1x MPC-3D-16XGE-SFPP
1x DPCE-R-20GE-2XGE
Is anybody here running these routing-engines in a similar
Hi,
Has anybody here attempted to upgrade the RAM in the SRX240H2 from the
factory installed 2GB to 4GB?
Having looked, it's a single dimm slot, and looks to be a standard
DDR2 667MHz PC2-5300 stick.
___
juniper-nsp mailing list
11 matches
Mail list logo