Hi all.
We have 2x EX4550's in VC that provide switching for an iSCSI network. There
are 3 Dell SANs and 4 Dell R820 ESXi hosts connected via twinax @ 10Gbps. Jumbo
frames and flow control is enabled.
My knowledge around Juniper tech is a little vague, but what's with the default
CoS settings
y and not directly to
the end client? Any suggestions otherwise? Explicit mode on the proxy is
not an option.
Regards,
Josh Farrelly
Senior Project Engineer
P +64 9 630 4095
M +64 21 919 885
E j...@base-2.co.nz <mailto:j...@base-2.co.nz>
PO Box 24666, Royal Oak, Auckland 1345.
12
Thanks Dale/Stefan, that's fixed it. Much appreciated.
Regards,
Josh Farrelly
Senior Project Engineer
P +64 9 630 4095
M +64 21 919 885
E j...@base-2.co.nz
PO Box 24666, Royal Oak, Auckland 1345.
126 Valley Rd, Mt Eden, Auckland 1024.
www.base-2.co.nz
-Original Message-
Flags: Active
Total down time: 0 sec, Last down: Never
Input packets : 24
Output packets: 36
Regards,
Josh Farrelly
Senior Project Engineer
P +64 9 630 4095
M +64 21 919 885
E j...@base-2.co.nz
PO Box 24666, Royal Oak, Auckland 1345.
126 Valley Rd, Mt Eden, Auckla
Could you put them both in a Linux box and just 'dd if' them?
-Original Message-
From: juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Jonas Frey (Probe
Networks)
Sent: Thursday, 22 September 2011 12:52
To: Isidoro Cristobal
Cc: juniper-nsp@p
Hi there.
Removing this option seems to have solved our issue.
Thanks,
Josh.
-Original Message-
From: juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Phil Mayers
Sent: Tuesday, 20 September 2011 19:32
To: juniper-nsp@puck.nether.net
Subject:
rk in
this situation?
I know this isn't the best situation nor the best thing to be doing, but
it's only a stop-gap measure during our migration to new infrastructure.
Regards,
Josh Farrelly.
___
juniper-nsp mailing list juniper-nsp@
7 matches
Mail list logo