On 13/11/14 16:44, Eric Van Tol wrote:
-Original Message- From: Phil Bedard
[mailto:phil...@gmail.com]
Maybe vMX is the answer to a 1U MX at this point, depending on the
throughput you really need.
How do you stuff a minimum of 12x1G and 4x10G interfaces into a 1U
server that needs to
On 03/11/14 01:51, Darren Liew wrote:
Hi Guys,
Thanks for all the suggestion. Part of my requirement is also to integrate
with the RADIUS attributes, so that we can dynamic control different users
with different bandwidth according to their subscriptions & along with the
service accounting.
OK
On 12-07-12 3:37 PM, Ihsan Junaidi Ibrahim wrote:
Hi,
On Jul 12, 2012, at 3:01 PM, Frank Norman wrote:
...
Now can someone tell me
1) what are the standard models (PPPoE or DHCP ? ) that are being
used in such kind of broadband networks?? and which is more
flexible??
Both are fine from prot
On 7-10-11 8:25 PM, Amos Rosenboim wrote:
Hi Paul,
The Junos DHCPv6 implementation does not support DHCPv6 IA requests
as sent by users. It supports DHCPv6 PD (prefix delegation) for
allocating prefixes to downstream routers.
However you don't really need DHCPv6 to assign users with IP
addresse
On Tue, 2011-07-05 at 15:59 -0300, Thiago Lizardo wrote:
> Hi Muhammad,
>
> First of all you need to create "rate limits"(2Mb, 4Mb, etc). After, you need
> to create policies for each bandwidth profile. Inside each "policy-list"
> configuration you will put the rate limit that was created.
>
Y
On Mon, 2011-07-04 at 09:39 +0400, Muhammad Rehan wrote:
> Hi Team,
>
> I need some help from you guys, i have to create QOS Policies Per Vlan (user
> profiles are created and pool,local interface and Virtual router has been
> fetched from radius server , PPPOE with VLANS) managing BW for every V
On Wed, 2007-12-05 at 15:17 +0200, M.Mihailidis wrote:
> the thing im looking for is interim (something) to keep track of subscriber
> packets or bandwidth any one have any clue??
> - Original Message -
> From: M.Mihailidis
> To: Juniper-Nsp
> Sent: Wednesday, December 05, 2007
On
http://www.juniper.net/techpubs/software/erx/junose80/swconfig-link/html/dynamic-interfaces-upperlayer-config5.html#2419436
a setup is explained with "ip service-profile" that is supposed to
replace the "subscriber" command for rfc1483/bridged over ATM VCs.
I've taken my working rfc1483/bridged
8 matches
Mail list logo