Hi,
Everything in the junos doc works as expected and I have tried a lot
of combs, if you are using this procedure to select only local BGP
routes do not forget to reject everything else too, because the
default accept policy in the junos BGP, not sure if this is the
problem.
Below a Juniper exam
write some kind of event-script to do
that. Someone have implemented something like that and, if possible,
share the solution?
Best Regards,
Ricardo Tavares
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo
reflector works fine without LDP.
Is this a normal behavior? If yes someone can explain the process? If yes
maybe there is a knob to control this?
Best Regards,
Ricardo Tavares
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https
Hi Diogo,
Maybe if u try this url:
http://www.juniper.net/techpubs/en_US/src3.0/topics/example/simple/sae-devices-coa-sample.html
and
https://download.juniper.net/software/sdx/src-pe-3.0.0/SDK+AppSupport+Demos+Samples.tar.gz
Regars,
Ricardo.
On Fri, Dec 12, 2008 at 11:51 AM, Diogo Montagner
Hi!
Old topic:
http://puck.nether.net/pipermail/juniper-nsp/2007-June/008349.html
On Tue, Dec 2, 2008 at 6:05 PM, Andreas Friedrich <[EMAIL PROTECTED]> wrote:
> That sounds as we have interpreted it. But it does not seam to work for us.
> We have following setup
> CPE - PE (E-Series) - P (Cisc
Try something like:
=
set system syslog file Special-Events daemon info
set system syslog file Special-Events match "(.*EVENT
UpDown.*->.*)|(.*bgp.*)|(.*LDP.*)|(.*OSPF.*);"
=
so you can do:
show log S
Have you tried the "show interfaces diagnostics optics" to check the power
levels?
Regards.
Ricardo.
On Mon, Aug 25, 2008 at 12:05 PM, Eric Van Tol <[EMAIL PROTECTED]> wrote:
> Hi all,
> I'm experiencing a strange RX issue on a link and I need some more ideas on
> where to look. Two routers
7 matches
Mail list logo