Try something like: ================================================= set system syslog file Special-Events daemon info set system syslog file Special-Events match "(.*EVENT UpDown.*->.*)|(.*bgp.*)|(.*LDP.*)|(.*OSPF.*);" =================================================
so you can do: show log Special-Events or monitor start Special-Events Regards, Ricardo On Mon, Dec 1, 2008 at 8:46 PM, a. rahman isnaini rst / netsoft < [EMAIL PROTECTED]> wrote: > Hi, > > > To generate log like cisco "sh logging" using access-list, i have > configured : > - Firewall>Family Inet>Filter "log">Match all then log > - Interface>Unit x> Family Inet> input filter "log" > - System>Services>Syslog>all facilities [any] > > All I've seen by "show log messages" is just simply standard log (somebody > is login, etc..). > And as well, "show firewall log", it match the "log" but only shows Point > to Point session. > > Any simple way to have log such cisco did ? please kindly advice. > > rgs > a. r.isnaini rangkayo sutan > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- __________________________________________ Vai Encarar? http://www.vaiencarar.com.br _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
