Re: [j-nsp] MX304 - Edge Router

Hello, > So there are a couple of enforced licenses even on MX ... and they have > always been enforced. Subscriber MGMT is one of these features. Well I remember wanted to use dhcp server on a MX204 for a local lan used only... for local administrators... that required some license I didn't hav

[j-nsp] QFX3500 and... multicast forward (VRRP related)

--- Begin Message --- Hello there, I have a strange clue with an QFX3500-48S4Q, and with "simple" VRRP setup. On port xe-0/0/6.0 I have a infrastructure (cisco switches) with a VLAN 3016 who want to be VRRP with an MX204 on et-0/1/0.0. Current config of the switch : interfaces { xe-0/0/6 {

[j-nsp] HE.net Tunnelbroker and m7i

Hi there, I am currently in the progress to change from OpenBSD to Juniper M7i. On one router I'd like to migrate one tunnelbroker.net IPv6 from he.net to M7i. I currently use the following: ip-1/2/0 { unit 0 { tunnel { source 7x.xx.xx.1;

[j-nsp] OpenBGP to Juniper :)

are fictious in this case... :p -- Xavier Beaudouin ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] ATM2 pic connected to another M7i cannot get ISIS adjatency ; (

S, then I will see :) Xavier > Stefan Fouant > GPG Key ID: 0xB4C956EC > > Sent from my HTC EVO. > > - Reply message - > From: "Xavier Beaudouin" > Date: Thu, Jul 7, 2011 10:51 am > Subject: [j-nsp] ATM2 pic connected to another M7i cannot get ISIS

[j-nsp] ATM2 pic connected to another M7i cannot get ISIS adjatency ; (

Hi there, I have 2 M7i with pic : PIC 3 REV 08 750-005724 CN54302x OC-3 ATM-II IQ, MM Since I don't use ATM, I wanted to use this as interrouter connection using : jun-m7i-1 at-0/3/0 <-> jun-m7i-2 at-0/3/0 jun-m7i-1 at-0/3/1 <-> jun-m7i-2 at-0/3/1 I finaly found a w

[j-nsp] SG550 and Vlan number limitations ?

uch poor limitation. Is there any way to by pass that and use this mordern firewall as a firewall not a thing that will have to redesign our network from scratch ? Thanks, /Xavier -- Xavier Beaudouin - http://oav.net/ ___ juniper-nsp mailing list jun

[j-nsp] M20 + P-AS and simple NAT ?

Hello, I have fundamental question about Nat and how to setup with a P-AS. I have the following setup ge-0/2/0.10 (10.1.2.189)---M20--ge-0/1/0.8 (172.31.17.254) I need to make some NAT from ge-0/1/0.8 when unicast connection is done on 172.31.17.0/24 to any machines. The thing I don't understa