Hi Wojciech,
we are using DPCE 4x 10GE R. I had a typo in my original email, xe-5/2/0
would be the correct interface of course but the config matches the
correct numbers.
The network-services mode is "IP"
The DPC is fine since we are using all other ports for ethernet services.
I just tested aga
Hi Jeff,
What type of DPC card you're using? As per your initial email I wouldn't
expect PIC 4 on DPC card related to gr-5/4/0 interface to be present as
PICs can take numbers between 0 and 3.
What is your network-services mode (show chassis network-services)?
Is DPC card up (show chassis fpc)?
Hi Jim,
thanks for the quick reply! However, unfortunately that did not do the
job and the interface still doesn't show up, neither with 1g nor 10g for
the bandwidth:
# show chassis fpc 0
pic 0 {
tunnel-services {
bandwidth 10g;
}
}
# show interfaces gr-0/0/0
unit 0 {
des
On DPCs you need to set the bandwidth setting.
set chassis fpc pic tunnel-services bandwidth <10g - 100g>
Be advised that this will burn a 10 gig port for each 10 gigs you assign to
tunnel-services.
Regard,
Clay Haynes
Sent from my iPhone
> On 29 Aug 2019, at 10:50, Jeff Meyers wrote:
>
Hi list,
I'm trying to setup a GRE tunnel interface on a MX480 with DPCE
linecards. I want to use xe-5/4/0 and have therefore configured this
interface under 'edit chassis' for tunnel-services. The interface
vanishes as expected. I have then configured the interface gr-5/4/0 with
unit 0 but is no
5 matches
Mail list logo
