> -Original Message-
> From: sth...@nethelp.no [mailto:sth...@nethelp.no]
>
> You should be just fine with 12.3. Can you share some of your config
> related to the H-QoS?
I'm barely at the testing phase right now. The config I was using is below,
but using this config, I was unable to pi
> Thanks for the confirmation. I was aware that 10G were only port-based
> queuing and I did find some more documentation that supports your statement,
> but whenever I enable hierarchical queuing on MIC slot 1 (the 10-port 1G MIC)
> of my MX5, I see this in the syslog:
>
> dcd[1415]: DCD_PARS
> -Original Message-
> From: sth...@nethelp.no [mailto:sth...@nethelp.no]
> Sent: Friday, February 07, 2014 1:05 PM
> To: Eric Van Tol
> Subject: Re: [j-nsp] H-QoS support
>
> H-QoS is supported on the MICs, because these connect to the "Q" side of
&
> Can someone please confirm whether or not H-QoS is support on MX5 with a
> MIC-3D-20GE-SFP? I can't believe all the searching I've had to do just to
> figure this out, where the various sources I've found give very confusing and
> obviously incorrect information about what's supported. For i
Hi all,
Can someone please confirm whether or not H-QoS is support on MX5 with a
MIC-3D-20GE-SFP? I can't believe all the searching I've had to do just to
figure this out, where the various sources I've found give very confusing and
obviously incorrect information about what's supported. For i
5 matches
Mail list logo
