On Sun, Sep 18, 2011 at 8:57 AM, MSusiva wrote:
Hi,
> I would like to know if it is possible to do l2circuit local-switching
> between two units (different VLAN!) on one physical GE-port on a MX router.
> The problem is that local-switching is only possible between SAME vlan-ids
> without additi
Hi Experts,
I would like to know if it is possible to do l2circuit local-switching
between two units (different VLAN!) on one physical GE-port on a MX router.
The problem is that local-switching is only possible between SAME vlan-ids
without additional configs (vlan input/output map swap/push/pop
On Fri, May 11, 2007 at 10:25:17AM +0200, [EMAIL PROTECTED] wrote:
> Same limitations as vlan-ccc - so you need VLAN id >= 512 unless you have
> IQ PIC or modern SFP-based PIC.
>
> We use l2circuit local-switching quite a bit, works for us. Never tried
> with an aggreated interface though.
We hav
> doesnt work:
>
> Connection/Circuit Type St Time last up # Up trans
> test if-sw Dn - 0
> ae0.28intf NP
> ge-1/1/0.3intf NP
>
> [EMAIL PROTECTED] show protocols connections
> interface-switch test {
> inte
Hi Alexander,
doesnt work:
Connection/Circuit Type St Time last up # Up trans
test if-sw Dn - 0
ae0.28intf NP
ge-1/1/0.3intf NP
[EMAIL PROTECTED] show protocols connections
interface-switch test {
interface
Jonas,
try proto connections. If it works, be happy. :)
Been there, did that, just did the same, but
actually worked.
-ako
On Thu, 10 May 2007 14:27:53 +0200, Jonas Frey wrote:
> Hello,
>
> i am trying to configure local-switching via l2circuits.
> Config is pretty straight-forward:
>
> local-
Hello,
i am trying to configure local-switching via l2circuits.
Config is pretty straight-forward:
local-switching {
interface ae0.28 {
end-interface {
interface ge-1/1/0.3;
}
(both interfaces are vlan tagged with the same vlan)
However this doesnt work. Via show
7 matches
Mail list logo