On 19 October 2015 at 17:33, james list wrote:
Hey James,
> I currently have a wan link between two MXs that sometimes is experiencing
> errors.
>
> I’ve on top of the link OSPF (timer 1/3) as routing protocol and I’d like
> to find out any possible way to exclude the link when errors are in pl
ewbury, Berkshire, RG14 5BY.
>
>
> -Original Message-----
> > From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf
> > Of james list
> > Sent: Monday, October 19, 2015 3:34 PM
> > To: juniper-nsp@puck.nether.net
> > Subject: [j-nsp] Lin
er-nsp-boun...@puck.nether.net] On Behalf
> Of james list
> Sent: Monday, October 19, 2015 3:34 PM
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] Link with errors, how to fast detect ?
>
> Dear experts,
>
> I currently have a wan link between two MXs that sometimes is experienci
If that's CRC errors which cause the OSPF across the link to flap, then
You could configure a RMON event with appropriate thresholds, the OID is
in the ifJnxTable:
aarseniev@labrouter> show snmp mib walk ifJnxTable ascii | grep crc
ifJnxInHslCrcErrors.1 = 0
ifJnxInHslCrcErrors.4 = 0
ifJnxInHslC
Hello
Indeed it s not flapping the interface most of the times, just crc errors...
Cheers
Il 19/Ott/2015 20:49, "serge vautour" ha scritto:
> Hello,
>
> If you're worried about the link flapping, just set a Down-->Up hold-timer
> directly on the interface.
>
>
> http://www.juniper.net/documentat
Hello,
If you're worried about the link flapping, just set a Down-->Up hold-timer
directly on the interface.
http://www.juniper.net/documentation/en_US/junos15.1/topics/reference/configuration-statement/hold-time-edit-interfaces.html
Serge
On Mon, Oct 19, 2015 at 11:33 AM, james list wrote:
>
Hello Alex,
interface do not flap at all every time...
Sometimes ospf neighbor is up and revenue traffic of the customer (tcp
traffic) is loss.
Cheers
James
2015-10-19 17:24 GMT+02:00 Alexander Arseniev :
> Hello,
> Not sure what exactly You are trying to achieve, looks like You want to
> delay
Hello,
Not sure what exactly You are trying to achieve, looks like You want to
delay announcing this link into OSPF (and by extension, using it for
transit traffic) unless it has been stable for 3 secs.
You could achieve this by defaulting this link to broadcast (if it is
currently configured a
Dear experts,
I currently have a wan link between two MXs that sometimes is experiencing
errors.
I’ve on top of the link OSPF (timer 1/3) as routing protocol and I’d like
to find out any possible way to exclude the link when errors are in place
and below to the 3 seconds of the OSPF timers.
I’
9 matches
Mail list logo