Re: [j-nsp] SRX WAN DHCP

2018-12-12 Thread Mohammad Khalil
And I cannot find the command : set system services dhcp propagate-settings On Wed, 12 Dec 2018 at 11:12, Mohammad Khalil wrote: > I have followed the below link: > > https://www.redelijkheid.com/blog/2017/2/13/juniper-srx-and-dhcp-client-challenge > > As per many articles specify that the TTL m

Re: [j-nsp] SRX WAN DHCP

2018-12-12 Thread Mohammad Khalil
I have followed the below link: https://www.redelijkheid.com/blog/2017/2/13/juniper-srx-and-dhcp-client-challenge As per many articles specify that the TTL might decrease (even though on the old box , this is was not the case) and again with no luck I have configured my ge-0/0/0 interface like be

Re: [j-nsp] SRX WAN DHCP

2018-12-10 Thread Andrey Kostin
Just adding that new jdhcpd daemon was implemented long ago and coexisted at least in junos 12 and 13 causing a lot of confusion. Old dhcpd daemon was (recently) removed, so OP needs to adjust to new config. Kind regards, Andrey Eldon Koyle писал 10.12.2018 10:55: I think the commands to che

Re: [j-nsp] SRX WAN DHCP

2018-12-10 Thread Eldon Koyle
I think the commands to check on the dhcp client are show dhcp client binding and show dhcp client statistics. There are a lot of bugs in -D70. -- Eldon On Mon, Dec 10, 2018 at 8:42 AM Mohammad Khalil wrote: > I cannot do the upgrade right now as I have to do the setup so quickly > What featu

Re: [j-nsp] SRX WAN DHCP

2018-12-10 Thread Mohammad Khalil
I cannot do the upgrade right now as I have to do the setup so quickly What features should I enable ? On Mon, 10 Dec 2018 at 17:40, Eldon Koyle wrote: > The firmware that ships on the SRX is missing a lot of features. I would > recommend upgrading to the latest version in that code train, whic

Re: [j-nsp] SRX WAN DHCP

2018-12-10 Thread Eldon Koyle
The firmware that ships on the SRX is missing a lot of features. I would recommend upgrading to the latest version in that code train, which is 15.1X49-D150. -- Eldon On Mon, Dec 10, 2018 at 1:00 AM Mohammad Khalil wrote: > Hello all > I have an old SRX which I configured it is WAN IP address

[j-nsp] SRX WAN DHCP

2018-12-10 Thread Mohammad Khalil
Hello all I have an old SRX which I configured it is WAN IP address using the below command: set interfaces ge-0/0/0 unit 0 family inet address dhcp Now , I have replaced the box with a newer one (srx300 15.1X49-D70.3) but I cannot find the command itself I have tried the below: set interfaces ge-