Hi,
http://www.juniper.net/techpubs/software/junos/junos83/swconfig83-network-interfaces/html/interfaces-ethernet-config2.html
The statement speed (10m | 100m) applies only to the management Ethernet
interface (fxp0) and to the Fast Ethernet 12-port and 48-port Physical
Interface Cards (PICs). T
Hi Ras
I believe this kind of card is able to run only at 100Mbps full or half.
see:
http://www.juniper.net/techpubs/hardware/m7i/m7i-pic/frameset.html
Saying that the PE-12FE-TX is the only able to run at 10M or 100M
I have already had the same problem as you.
If you have some M7i with integra
Hi,
What's your platform and JUNOS?
Erdem
On 9/5/07, Ras <[EMAIL PROTECTED]> wrote:
> I've just tried to set a port on an PE-4FE-TX to 10m (set interfaces
> fe-0/0/1 speed 10m). This works fine on our PE-12FE-TX and the 'commit
> check' says all is well, but when I commit I get:
>
> /kernel: %KE
I've just tried to set a port on an PE-4FE-TX to 10m (set interfaces
fe-0/0/1 speed 10m). This works fine on our PE-12FE-TX and the 'commit
check' says all is well, but when I commit I get:
/kernel: %KERN-2: fe-0/0/1: Illegal media change: invalid speed
Are these 100m only ports? If not, what els
4 matches
Mail list logo