Hello experts,
I'm new to multicast and I'm having some configuration issues. I'm configuring
a static anycast PIM with 2 RPs. I'm using msdp between the 2 RPs. I have a
directly attached multicast source to the first RP, and a directly attached
multicast receiver on the other RP. The goal
Hi Doug,
Disable PIM completely on SRX100-1. That device is the source of your multicast
traffic, but doesn't need to participate in PIM, just like a normal mcast
source would not participate in PIM.
Your output shows that SRX100-1 has become the DR for the link between SRX100-1
and J1. Since
Systems Engineer
JNCIP-M/T #1441
-Original Message-
From: Stacy W. Smith [mailto:st...@acm.org]
Sent: Tuesday, June 28, 2011 3:31 PM
To: Doug Hanks
Cc: juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] Static AnyCast PIM + MSDP not working
Hi Doug,
Disable PIM completely on SRX100-1
On 6/28/2011 6:59 PM, Doug Hanks wrote:
Stacy,
I disabled PIM on the multicast source. I also disabled PIM on all of the
devices management interfaces (172.16.1.0/24). You were correct as the DR was
being elected on the broadcast network.
Disabling PIM on the management interfaces is a
4 matches
Mail list logo