in
Sent: Thursday, September 13, 2007 4:02 AM
To: Ivan c
Cc: juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] frame-relay J6350 to Cisco 2611
I am not sure but I believe yes
As long as Juniper does only normalized software.
As I remember Cisco has a proprietary encapsulation if you type on the c
I am not sure but I believe yes
As long as Juniper does only normalized software.
As I remember Cisco has a proprietary encapsulation if you type on the
cisco side "encapsulation frame-relay" without the IETF keyword.
You will also be able to modify the cisco side to remove this keyword if
it d
Hi Ivan
here is a starting config assuming you are on the serial 1/0/0
[EMAIL PROTECTED] show interfaces
se-1/0/0 {
dce;
encapsulation frame-relay;
serial-options {
clock-rate 2.048mhz;
}
unit 0 {
dlci 199;
family inet {
address 192.168.1.1/
Hi All,
Looking for a little help with a frame-relay connection between a
Cisco 2611 and a Juniper J6350.
This is the serial interface on the J6350, which I hope can play
frame-relay with IETF?
http://www.juniper.net/products/jseries/dsheet/100116.pdf
This is the Cisco 2611 side of the equation
4 matches
Mail list logo
