- Original Message -
From: Doug Marschke d...@proteus.net
To: juniper-nsp@puck.nether.net
Sent: Thursday, October 28, 2010 12:41 AM
Subject: [j-nsp] ho to tie 2 VR's together on EX4200
I would figure an LT interface like other platforms but it doesn't allow
for
an encapsulation. Ideas?
{master
Message-
From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-
boun...@puck.nether.net] On Behalf Of Doug Marschke
Sent: Wednesday, October 27, 2010 7:41 PM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] ho to tie 2 VR's together on EX4200
I would figure an LT interface like other
, 2010 3:25 AM
To: Doug Marschke; juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] ho to tie 2 VR's together on EX4200
Doug,
I think that for lt- interfaces to actually work You need either a T-PIC or
set chassis fpc X pic Y tunnel-services knob and AFAIK neither is
supported on EX
http
: Thursday, October 28, 2010 8:08 AM
To: 'Doug Marschke'; juniper-nsp@puck.nether.net
Subject: RE: [j-nsp] ho to tie 2 VR's together on EX4200
This is a bit of a kludge, but I've done this in the past and the way to do
this simply enough was to utilize physical port bindings on the VRs and then
run
I would figure an LT interface like other platforms but it doesn't allow for
an encapsulation. Ideas?
{master:0}[edit interfaces lt-0/0/0]
l...@s13# show
unit 0 {
point-to-point;
peer-unit 1;
family inet {
address 10.1.2.1/30;
}
}
unit 1 {
peer-unit 0;
5 matches
Mail list logo