Is you targeted LDP session between primary loopbacks of both routers?
By RFC, LDP requires the same transport address per LDP neighbor (the same
reason why you can have only one session between routers which have
multiple links between them).
Regards
On Wed, Aug 10, 2016 at 3:52 PM, Daniel
You already check that you're allowing ldp and rsvp through on your lo0
control plane filter?
On Tuesday, August 9, 2016, Mohammad Salbad wrote:
> yes it is, and as I mentioned before mpls lsp is already up between the acx
> and mx and carrying traffic, I want the ldp only
yes it is, and as I mentioned before mpls lsp is already up between the acx
and mx and carrying traffic, I want the ldp only between the nodes loopback
addresses for l2circuits and I'm not using it for mpls transport, noting
that I'm using rsvp for signling and mpls transport
On 9 August 2016 at
Hi,
Does each lo0 @ IP is visible via ISIS ?
On 8 Aug 2016 12:59, "Mohammad Salbad" wrote:
> Hi experts
>
> I have mx and acx routers both running isis and rsvp and I have mpls lsp
> configured between their loopbacks.
> when trying to establish ldp and l2circuits it does
On 08.08.2016 15:25, Mohammad Salbad wrote:
yes router id is configured
I'm suspecting that there is something preventing each router to send its
loopback address during the ldp session establishment, nothing that I have
already deactivated re-protect filter with no luck...
currently I'm
yes router id is configured
I'm suspecting that there is something preventing each router to send its
loopback address during the ldp session establishment, nothing that I have
already deactivated re-protect filter with no luck...
currently I'm thinking of rebooting acx..but since it is already in
Hello,
Do You have "set routing-options router-id " line
in Your config?
Thanks
Alex
On 08/08/2016 12:58, Mohammad Salbad wrote:
Hi experts
I have mx and acx routers both running isis and rsvp and I have mpls lsp
configured between their loopbacks.
when trying to establish ldp and
Hi experts
I have mx and acx routers both running isis and rsvp and I have mpls lsp
configured between their loopbacks.
when trying to establish ldp and l2circuits it does not work and when I do
show ldp neighbor details from both sided it gives me trasport address
0.0.0.0
noting that I have
8 matches
Mail list logo