Le 30/05/2013 07:28, Andrew Jones a écrit :
There is a hidden command you can use which is "show chassis cluster
information detail" which will give you a lot more information about how
the cluster is set up on each node and if there are any errors in regards
to the control link and fabric link.
There is a hidden command you can use which is "show chassis cluster
information detail" which will give you a lot more information about how
the cluster is set up on each node and if there are any errors in regards
to the control link and fabric link. In particular check that the control
port tag
Hi all,
some questions this morning :
- can I use the same vlan for both control links ? (em0 and em1 use the
same ip address).
- can I use the same vlan for control and data link ?
thanks
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
http
Le 30/05/2013 02:53, Nicholas Oas a écrit :
Is igmp snoop disabled on the Ethernet ports which connect the data
and control links?
Yes it is. I forgot to mention that.
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.n
Hi all,
I'm currently trying to setup a cluster of srx3400 using a pair of cisco
nexus to connect
control and data link for redundancy. Junos Version is 11.4r7.
Each SRX3400 uses one RE, one CRM, one SPC and one NPC.
The first node from the cluster is fine but the second node doesn't come
up
5 matches
Mail list logo